Stereolithography 3D printing technology in pharmaceuticals: a review

null

null (2016) · Philosophy Study · doi:10.17265/2159-5313/2016.09.003 · Cited by 28,317 · see citing works

Polymers for 3D Printing and Customized Additive Manufacturing

Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,785 · see citing works

A review on stereolithography and its applications in biomedical engineering

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,473 · see citing works

Biomedical applications of biodegradable polymers

Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206 · see citing works

Additive manufacturing: scientific and technological challenges, market uptake and opportunities

Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A. K., Bose, S., O’Donoghue, L., & Charitidis, C. A. (2017) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,166 · see citing works

Recent advances in 3D printing of biomaterials

Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734 · see citing works

Photopolymerization in 3D Printing

Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,456 · see citing works

Deep reinforcement learning for de novo drug design

Popova, M., Isayev, O., & Tropsha, A. (2018) · Science Advances · doi:10.1126/sciadv.aap7885 · Cited by 1,379 · see citing works

A review of dental CAD/CAM: current status and future perspectives from 20 years of experience

Miyazaki, T., HOTTA, Y., Kunii, J., et al. (2009) · Dental Materials Journal · doi:10.4012/dmj.28.44 · Cited by 1,073 · see citing works

Projection micro-stereolithography using digital micro-mirror dynamic mask

Sun, C., Fang, N. X., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 885 · see citing works

A new chapter in pharmaceutical manufacturing: 3D-printed drug products

Norman, J. J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 832 · see citing works

Innovations in 3D printing: a 3D overview from optics to organs

Schubert, C., van Langeveld, M. C., & Donoso, L. A. (2013) · British Journal of Ophthalmology · doi:10.1136/bjophthalmol-2013-304446 · Cited by 754 · see citing works

Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology

Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & DʼLima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 688 · see citing works

The Role of 3D Printing in Medical Applications: A State of the Art

Aimar, A., Palermo, A., & Innocenti, B. (2019) · Journal of Healthcare Engineering · doi:10.1155/2019/5340616 · Cited by 686 · see citing works

Effect of geometry on drug release from 3D printed tablets

Goyanes, Á., Martinez, P. R., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 674 · see citing works

Artificial intelligence for clinical trial design

Harrer, S., Shah, P., Antony, B., & Hu, J. (2019) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2019.05.005 · Cited by 672 · see citing works

Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing

Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 667 · see citing works

Bioprinting Toward Organ Fabrication: Challenges and Future Trends

Ozbolat, I. T., & Yu, Y. (2013) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2013.2243912 · Cited by 666 · see citing works

3D printing in pharmaceutics: A new tool for designing customized drug delivery systems

Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 663 · see citing works

A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks

Wang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633 · see citing works

Stereolithographic (SLA) 3D printing of oral modified-release dosage forms

Wang, J., Goyanes, Á., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 615 · see citing works

Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications

Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 607 · see citing works

Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine

Cui, X., Boland, T., DʼLima, D. D., & Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 587 · see citing works

3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets

Goyanes, Á., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2014) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 571 · see citing works

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges

Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K., Ahmed, W., & Arafat, B. T. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 555 · see citing works

Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization

Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 546 · see citing works

Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing

Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2014) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 532 · see citing works

3D printing of tablets containing multiple drugs with defined release profiles

Khaled, S. A., Burley, J., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 516 · see citing works

Novel Biomaterials Used in Medical 3D Printing Techniques

Tappa, K. K., & Jammalamadaka, U. M. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 501 · see citing works

Additive manufacturing technologies: state of the art and trends

Gardan, J. (2015) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 497 · see citing works

3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems

Goyanes, Á., Detamornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 493 · see citing works

Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation

Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 471 · see citing works

3D Printing technologies for drug delivery: a review

Prasad, L. K., & Smyth, H. D. C. (2015) · Drug Development and Industrial Pharmacy · doi:10.3109/03639045.2015.1120743 · Cited by 462 · see citing works

Micro-stereolithography of polymeric and ceramic microstructures

Zhang, X., Jiang, X., & Sun, C. (1999) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450 · see citing works

A poly(d,l-lactide) resin for the preparation of tissue engineering scaffolds by stereolithography

Melchels, F. P. W., Feijén, J., & Grijpma, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.055 · Cited by 437 · see citing works

Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms

Macdonald, N. P., Cabot, J. M., Smejkal, P., Guijt, R. M., Paull, B., & Breadmore, M. C. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00136 · Cited by 425 · see citing works

A Review on 3D Printing for Customized Food Fabrication

Sun, J., Peng, Z., Zhou, W., Fuh, J. Y. H., Hong, G. S., & Chiu, A. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.057 · Cited by 407 · see citing works

Rapid Prototyping of Tissue-Engineering Constructs, Using Photopolymerizable Hydrogels and Stereolithography

Dhariwala, B., Hunt, E., & Boland, T. (2004) · Tissue Engineering · doi:10.1089/ten.2004.10.1316 · Cited by 390 · see citing works

Vat photopolymerization 3D printing for advanced drug delivery and medical device applications

Xu, X., Awad, A., Martinez, P. R., Gaisford, S., Goyanes, Á., & Basit, A. W. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 381 · see citing works

Stereolithography of Three-Dimensional Bioactive Poly(Ethylene Glycol) Constructs with Encapsulated Cells

Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364 · see citing works

3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method

Martinez, P. R., Xu, X., Trenfield, S. J., Awad, A., Goyanes, Á., Telford, R., Basit, A. W., & Gaisford, S. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11060274 · Cited by 361 · see citing works

Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing

Goyanes, Á., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 357 · see citing works

Ceramic suspensions suitable for stereolithography

Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 356 · see citing works

3D printed microneedles for insulin skin delivery

Pere, C. P. P., Economidou, S. N., Lall, G. S., Ziraud, C., Boateng, J. S., Alexander, B. D., Lamprou, D. A., & Douroumis, D. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.03.031 · Cited by 352 · see citing works

Oral dosage forms fabricated by Three Dimensional Printing™

Katstra, W. E., Palazzolo, R. D., Rowe, C., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 335 · see citing works

Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing

Goyanes, Á., Chang, H., Sedough, D., Hatton, G. B., Wang, J., Buanz, A. B. M., Gaisford, S., & Basit, A. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.039 · Cited by 331 · see citing works

Stereolithography in tissue engineering

Skoog, S. A., Goering, P. L., & Narayan, R. J. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 324 · see citing works

Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography

Elomaa, L., Teixeira, S., Hakala, R. A., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 309 · see citing works

Multi-material stereolithography

Choi, J.-W., Kim, H.-C., & Wicker, R. B. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 307 · see citing works

Fabricating 3D printed orally disintegrating printlets using selective laser sintering

Fina, F., Madla, C. M., Goyanes, Á., Zhang, J., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.02.015 · Cited by 304 · see citing works

Personalised 3D Printed Medicines: Which Techniques and Polymers Are More Successful?

Konta, A. A., García-Piña, M., & Serrano, D. R. (2017) · Bioengineering · doi:10.3390/bioengineering4040079 · Cited by 301 · see citing works

3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs

Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299 · see citing works

Automated therapy preparation of isoleucine formulations using 3D printing for the treatment of MSUD: First single-centre, prospective, crossover study in patients

Goyanes, Á., Madla, C. M., Umerji, A., Duran, G., Giráldez-Montero, J. M., Lamas, M. J., Barcia, M. G., Taherali, F., Sánchez‐Pintos, P., Couce, M. L., et al. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118497 · Cited by 298 · see citing works

Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters

Lee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292 · see citing works

3D-Printed Mechanochromic Materials

Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D., & Boydston, A. J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506745m · Cited by 275 · see citing works

Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production

Johnson, A. R., Caudill, C. L., Tumbleston, J. R., Bloomquist, C. J., Moga, K. A., Ermoshkin, A. V., Shirvanyants, D. G., Mecham, S. J., Luft, J. C., & DeSimone, J. M. (2016) · PLoS ONE · doi:10.1371/journal.pone.0162518 · Cited by 275 · see citing works

Fabrication of drug-loaded hydrogels with stereolithographic 3D printing

Martinez, P. R., Goyanes, Á., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274 · see citing works

Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres

Lee, J. W., Kang, K. S., Lee, S. H., Kim, J., Lee, B., & Cho, D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.09.035 · Cited by 273 · see citing works

Translating 3D printed pharmaceuticals: From hype to real-world clinical applications

Seoane‐Viaño, I., Trenfield, S. J., Basit, A. W., & Goyanes, Á. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.05.003 · Cited by 269 · see citing works

High density 3D printed microfluidic valves, pumps, and multiplexers

Gong, H., Woolley, A. T., & Nordin, G. P. (2016) · Lab on a Chip · doi:10.1039/c6lc00565a · Cited by 264 · see citing works

A 3D-printed local drug delivery patch for pancreatic cancer growth suppression

Yi, H., Choi, Y., Kang, K. S., Hong, J. M., Pati, R. G., Park, M. N., Shim, I. K., Lee, C. M., Kim, S. C., & Cho, D. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.06.015 · Cited by 261 · see citing works

Three-Dimensional Printed PCL-Based Implantable Prototypes of Medical Devices for Controlled Drug Delivery

Holländer, J., Genina, N., Jukarainen, H., Khajeheian, M., Rosling, A., Mäkilä, E. M., & Sandler, N. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.12.012 · Cited by 252 · see citing works

Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography

Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/12/125014 · Cited by 246 · see citing works

Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression

Kim, K., Yeatts, A. B., Dean, D., & Fisher, J. P. (2010) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0171 · Cited by 245 · see citing works

Three-Dimensional Printing: Basic Principles and Applications in Medicine and Radiology

Kim, G. B., Lee, S., Kim, H., Yang, D. H., Kim, Y., Kyung, Y. S., Kim, C., Choi, S., Kim, B. J., Ha, H., et al. (2016) · Korean Journal of Radiology · doi:10.3348/kjr.2016.17.2.182 · Cited by 243 · see citing works

An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems

Vithani, K., Goyanes, Á., Jannin, V., Basit, A. W., Gaisford, S., & Boyd, B. J. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2531-1 · Cited by 236 · see citing works

3D stereolithography printing of graphene oxide reinforced complex architectures

Lin, D. L., Jin, S., Zhang, F., Wang, C., Wang, Y., Zhou, C., & Cheng, G. J. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/43/434003 · Cited by 232 · see citing works

Three-dimensional drug printing: A structured review

Ursan, I. D., Chiu, L., & Pierce, A. (2013) · Journal of the American Pharmacists Association · doi:10.1331/japha.2013.12217 · Cited by 231 · see citing works

Stereolithography (SLA) 3D printing of an antihypertensive polyprintlet: Case study of an unexpected photopolymer-drug reaction

Xu, X., Martinez, P. R., Madla, C. M., Joubert, F., Goyanes, Á., Basit, A. W., & Gaisford, S. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101071 · Cited by 231 · see citing works

M3DISEEN: A novel machine learning approach for predicting the 3D printability of medicines

Elbadawi, M., Muñiz, B., Gavins, F. K. H., Ong, J. J., Gaisford, S., Pérez, G., Basit, A. W., Cabalar, P., & Goyanes, Á. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119837 · Cited by 231 · see citing works

3D Printing and Neurosurgery—Ready for Prime Time?

Klein, G. T., Lu, Y., & Wang, M. Y. (2013) · World Neurosurgery · doi:10.1016/j.wneu.2013.07.009 · Cited by 225 · see citing works

Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials

Fisher, J. P., Dean, D., & Mikos, A. G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00178-3 · Cited by 216 · see citing works

High‐Speed 3D Printing of High‐Performance Thermosetting Polymers via Two‐Stage Curing

Kuang, X., Zhao, Z., Chen, K., et al. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700809 · Cited by 216 · see citing works

3D printing of a wearable personalized oral delivery device: A first-in-human study

Liang, K., Carmone, S., Brambilla, D., & Leroux, J. (2018) · Science Advances · doi:10.1126/sciadv.aat2544 · Cited by 208 · see citing works

Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds

Arcaute, K., Mann, B. K., & Wicker, R. B. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 206 · see citing works

Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets

Martinez, P. R., Goyanes, Á., Basit, A. W., & Gaisford, S. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1075-3 · Cited by 203 · see citing works

A 3D printed bilayer oral solid dosage form combining metformin for prolonged and glimepiride for immediate drug delivery

Gioumouxouzis, C. I., Baklavaridis, A., Katsamenis, O. L., Markopoulou, C. K., Bouropoulos, N., Tzetzis, D., & Fatouros, D. G. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.04.020 · Cited by 202 · see citing works

Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography

Choi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200 · see citing works

The effect of the surfactants on the formulation of UV-curable SLA alumina suspension

Li, K., & Zhao, Z. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.11.143 · Cited by 197 · see citing works

Application of Fused Deposition Modelling (FDM) Method of 3D Printing in Drug Delivery

Long, J., Gholizadeh, H., Lu, J., Bunt, C. R., & Seyfoddin, A. (2016) · Current Pharmaceutical Design · doi:10.2174/1381612822666161026162707 · Cited by 189 · see citing works

Three-Dimensional Printing in Pharmaceutics: Promises and Problems

Yu, D., Zhu, L., Branford-White, C. J., & Xiang, Y. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21284 · Cited by 188 · see citing works

Predicting physical stability of solid dispersions by machine learning techniques

Han, R., Xiong, H., Ye, Z., Yang, Y., Huang, T., Jing, Q., Lu, J., Pan, H., Ren, F., & Ouyang, D. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.08.030 · Cited by 180 · see citing works

Harnessing artificial intelligence for the next generation of 3D printed medicines

Elbadawi, M., McCoubrey, L. E., Gavins, F. K. H., Ong, J. J., Goyanes, Á., Gaisford, S., & Basit, A. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.05.015 · Cited by 178 · see citing works

Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography

Badev, A., Abouliatim, Y., Chartier, T., et al. (2011) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 170 · see citing works

Preparation of designed poly(d,l-lactide)/nanosized hydroxyapatite composite structures by stereolithography

Ronca, A., Ambrosio, L., & Grijpma, D. W. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.12.004 · Cited by 165 · see citing works

Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing

Heller, C. M., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23734 · Cited by 164 · see citing works

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

Wang, X., Ao, Q., Tian, X., Fan, J., Wei, Y., Hou, W., Tong, H., & Bai, S. (2016) · Materials · doi:10.3390/ma9100802 · Cited by 164 · see citing works

Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material

Water, J. J., Bohr, A., Boetker, J. P., Aho, J., Sandler, N., Nielsen, H. M., & Rantanen, J. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24305 · Cited by 163 · see citing works

Tablets With Material Gradients Fabricated by Three-Dimensional Printing

Yu, D., Xiang, Y., Huang, W. D., Liu, J., Wang, Y. G., & Xu, H. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20864 · Cited by 159 · see citing works

Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery

Xu, X., Goyanes, Á., Trenfield, S. J., Díaz-Gómez, L. A., Alvarez‐Lorenzo, C., Gaisford, S., & Basit, A. W. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111773 · Cited by 158 · see citing works

3D Printing of Pharmaceuticals and Drug Delivery Devices

Mathew, E., Pitzanti, G., Larrañeta, E., & Lamprou, D. A. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12030266 · Cited by 157 · see citing works

Microstereolithography and characterization of poly(propylene fumarate)-based drug-loaded microneedle arrays

Lu, Y., Mantha, S. N., Crowder, D. C., Chinchilla, S., Shah, K. N., Yun, Y., Wicker, R. B., & Choi, J.-W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045001 · Cited by 151 · see citing works

Cure depth control for complex 3D microstructure fabrication in dynamic mask projection microstereolithography

Choi, J., Wicker, R. B., Cho, S., Ha, C., & Lee, S. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910925072 · Cited by 148 · see citing works

3D printed chitosan dressing crosslinked with genipin for potential healing of chronic wounds

Hafezi, F., Scoutaris, N., Douroumis, D., & Boateng, J. S. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.02.020 · Cited by 145 · see citing works

3D printing of gummy drug formulations composed of gelatin and an HPMC-based hydrogel for pediatric use

Tagami, T., Ito, E., Kida, R., et al. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.120118 · Cited by 141 · see citing works

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches

Hwang, H. H., Zhu, W. Z., Victorine, G., Lawrence, N., & Chen, S. (2017) · Small Methods · doi:10.1002/smtd.201700277 · Cited by 139 · see citing works

I Spy with My Little Eye: A Paediatric Visual Preferences Survey of 3D Printed Tablets

Januskaite, P., Xu, X., Ranmal, S. R., Gaisford, S., Basit, A. W., Tuleu, C., & Goyanes, Á. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12111100 · Cited by 139 · see citing works

3D printing for oral drug delivery: a new tool to customize drug delivery

Pandey, M., Choudhury, H., Fern, J. L. C., Kee, A. T. K., Kou, J., Jing, J. L. J., Her, H. C., Yong, H. S., Ming, H. C., Bhattamisra, S. K., et al. (2020) · Drug Delivery and Translational Research · doi:10.1007/s13346-020-00737-0 · Cited by 135 · see citing works

Fumaric Acid Monoethyl Ester-Functionalized Poly( d , l -lactide)/N-vinyl-2-pyrrolidone Resins for the Preparation of Tissue Engineering Scaffolds by Stereolithography

Jansen, J., Melchels, F. P. W., Grijpma, D. W., et al. (2008) · Biomacromolecules · doi:10.1021/bm801001r · Cited by 133 · see citing works

Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing

Thrasher, C. J., Schwartz, J. J., & Boydston, A. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13909 · Cited by 133 · see citing works

Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques

Genina, N., Fors, D., Vakili, H., et al. (2012) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2012.07.020 · Cited by 129 · see citing works

High resolution photopolymer for 3D printing of personalised microneedle for transdermal delivery of anti-wrinkle small peptide

Lim, S. H., Kathuria, H., Amir, M. H. B., et al. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.021 · Cited by 129 · see citing works

Integration of 3D printing with dosage forms: A new perspective for modern healthcare

Shende, P. K., & Sudhir, A. (2018) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2018.07.167 · Cited by 123 · see citing works

Three-dimensional fabrication of cell-laden biodegradable poly(ethylene glycol-co-depsipeptide) hydrogels by visible light stereolithography

Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 121 · see citing works

3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers

Credi, C., Fiorese, A., Tironi, M., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08880 · Cited by 117 · see citing works

Extrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients

Trachtenberg, J. E., Placone, J. K., Smith, B. T., Fisher, J. P., & Mikos, A. G. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1286184 · Cited by 116 · see citing works

Tough and degradable photopolymers derived from alkyne monomers for 3D printing of biomedical materials

Oesterreicher, A., Wiener, J., Roth, M., Moser, A., Gmeiner, R., Edler, M., Pinter, G., & Grießer, T. (2016) · Polymer Chemistry · doi:10.1039/c6py01132b · Cited by 112 · see citing works

Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation

Vitale, A., & Cabral, J. T. (2016) · Materials · doi:10.3390/ma9090760 · Cited by 112 · see citing works

Projection Microfabrication of Three-Dimensional Scaffolds for Tissue Engineering

Han, L., Mapili, G., Chen, S., & Roy, K. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2823079 · Cited by 110 · see citing works

A novel fast disintegrating tablet fabricated by three-dimensional printing

Yu, D., Branford-White, C. J., Yang, Y., et al. (2009) · Drug Development and Industrial Pharmacy · doi:10.3109/03639040903059359 · Cited by 108 · see citing works

3D printing of responsive hydrogels for drug-delivery systems

Larush, L., Kaner, I., Fluksman, A., Tamsut, A., Pawar, A. A., Lesnovski, P., Benny, O., & Magdassi, S. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0009 · Cited by 106 · see citing works

Optimization of rheological properties of photopolymerizable alumina suspensions for ceramic microstereolithography

Goswami, A., Ankit, K., Balashanmugam, N., et al. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.09.059 · Cited by 102 · see citing works

Flexible and Elastic Scaffolds for Cartilage Tissue Engineering Prepared by Stereolithography Using Poly(trimethylene carbonate)‐ B ased Resins

Schüller-Ravoo, S., Teixeira, S. M., Feijén, J., et al. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201300399 · Cited by 101 · see citing works

Optimization of Dispersion and Viscosity of a Ceramic Jet Printing Ink

Teng, W. D., Edirisinghe, M. J., & Evans, J. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02855.x · Cited by 101 · see citing works

3D printing promotes the development of drugs

Zhu, X. M., Li, H., Huang, L., Zhang, M., Fan, W., & Cui, L. (2020) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2020.110644 · Cited by 99 · see citing works

Anti-biofilm multi drug-loaded 3D printed hearing aids

Vivero-Lopez, M., Xu, X., Muras, A., Otero, A., Concheiro, Á., Gaisford, S., Basit, A. W., Alvarez‐Lorenzo, C., & Goyanes, Á. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111606 · Cited by 99 · see citing works

Metal filled resin for stereolithography metal part

Bártolo, P., & Gaspar, J. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.124 · Cited by 98 · see citing works

High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectrolyte surfactants

de Hazan, Y., Heinecke, J., Weber, A. P., et al. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.05.012 · Cited by 96 · see citing works

Ink-Jet Printing of Micro-Electro-Mechanical Systems (MEMS)

Lau, G., & Shrestha, M. (2017) · Micromachines · doi:10.3390/mi8060194 · Cited by 95 · see citing works

Thiol-allyl ether-methacrylate ternary systems: evolution mechanism of polymerization-induced shrinkage stress and mechanical properties

Lee, T. Y., Carioscia, J., Smith, Z., & Bowman, C. N. (2007) · Macromolecules · doi:10.1021/ma0624954 · Cited by 92 · see citing works

3D Printing

Noorani, R. (2017) · CRC Press eBooks · doi:10.1201/9781315155494 · Cited by 92 · see citing works

Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms

Rattanakit, P., Moulton, S. E., Santiago, K. S., Liawruangrath, S., & Wallace, G. G. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.11.007 · Cited by 90 · see citing works

Novel ex vivo model for hands-on teaching of and training in EUS-guided biliary drainage: creation of “Mumbai EUS” stereolithography/3D printing bile duct prototype (with videos)

Dhir, V. K., Itoi, T., Fockens, P., et al. (2014) · Gastrointestinal Endoscopy · doi:10.1016/j.gie.2014.09.011 · Cited by 88 · see citing works

New World of 3-D Printing Offers "Completely New Ways of Thinking": Q&A with Author, Engineer, and 3-D Printing Expert Hod Lipson

Mertz, L. (2013) · IEEE Pulse · doi:10.1109/mpul.2013.2279615 · Cited by 85 · see citing works

Optimization and Prediction of Ibuprofen Release from 3D DLP Printlets Using Artificial Neural Networks

Madžarević, M., Medarević, D. P., Vulović, A., et al. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11100544 · Cited by 82 · see citing works

3D Printed Micro Free-Flow Electrophoresis Device

Anciaux, S. K., Geiger, M., & Bowser, M. T. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.6b01573 · Cited by 80 · see citing works

Photopolymerization kinetics of an epoxy‐based resin for stereolithography

Corcione, C. E., Greco, A., & Maffezzoli, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20347 · Cited by 79 · see citing works

Inkjet printed antibiotic- and calcium-eluting bioresorbable nanocomposite micropatterns for orthopedic implants

Gu, Y., Chen, X., Lee, J. H., Monteiro, D. A., Wang, H., & Lee, W. Y. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.006 · Cited by 79 · see citing works

3D printed intelligent scaffold prevents recurrence and distal metastasis of breast cancer

Shi, X., Cheng, Y., Wang, J., Chen, H., Wang, X., Li, X., Tan, W., & Tan, Z. (2020) · Theranostics · doi:10.7150/thno.47933 · Cited by 76 · see citing works

On-line force monitoring of platform ascending rapid prototyping system

Huang, Y., & Jiang, C. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.05.015 · Cited by 75 · see citing works

Recent Applications of Three Dimensional Printing in Cardiovascular Medicine

Gardin, C., Ferroni, L., Latrémouille, C., Chachques, J. C., Mitrečić, D., & Zavan, B. (2020) · Cells · doi:10.3390/cells9030742 · Cited by 75 · see citing works

Hydrophilic excipients in digital light processing (DLP) printing of sustained release tablets: Impact on internal structure and drug dissolution rate

Krkobabić, M., Medarević, D. P., Cvijić, S., Grujić, B., & Ibric, S. R. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118790 · Cited by 74 · see citing works

Tailoring Atomoxetine Release Rate from DLP 3D-Printed Tablets Using Artificial Neural Networks: Influence of Tablet Thickness and Drug Loading

Stanojević, G., Medarević, D. P., Adamov, I., et al. (2020) · Molecules · doi:10.3390/molecules26010111 · Cited by 66 · see citing works

Investigation of Polymer-Surfactant and Polymer-Drug-Surfactant Miscibility for Solid Dispersion

Gumaste, S. G., Gupta, S. S., & Serajuddin, A. T. M. (2016) · The AAPS Journal · doi:10.1208/s12248-016-9939-5 · Cited by 63 · see citing works

Patterned Three‐Dimensional Encapsulation of Embryonic Stem Cells using Dielectrophoresis and Stereolithography

Bajaj, P., Marchwiany, D. A., Duarte, C. A., & Bashir, R. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200318 · Cited by 57 · see citing works

Logistics of Three-dimensional Printing

Hodgdon, T., Danrad, R., Patel, M. J., Smith, S. E., Richardson, M. L., Ballard, D. H., Ali, S., Trace, A. P., DeBenedectis, C. M., Zygmont, M. E., et al. (2017) · Academic Radiology · doi:10.1016/j.acra.2017.08.003 · Cited by 56 · see citing works

Drug Delivery From Poly(ethylene glycol) Diacrylate Scaffolds Produced by DLC Based Micro‐Stereolithography

Vehse, M., Petersen, S., Sternberg, K., Schmitz, K., & Seitz, H. (2014) · Macromolecular Symposia · doi:10.1002/masy.201400060 · Cited by 55 · see citing works

3D Cell Printing of Tissue/Organ-Mimicking Constructs for Therapeutic and Drug Testing Applications

Kim, J., Kong, J. S., Han, W., Kim, B. S., & Cho, D. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21207757 · Cited by 55 · see citing works

Indirect three-dimensional printing of synthetic polymer scaffold based on thermal molding process

Park, J., Jung, J. W., Kang, H., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025003 · Cited by 54 · see citing works

Three-Dimensional Printing of Carbamazepine Sustained-Release Scaffold

Lim, S. H., Chia, S. M. Y., Kang, L., & Yap, K. Y. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2016.04.031 · Cited by 54 · see citing works

The recent development and applications of fluidic channels by 3D printing

Zhou, Y. (2017) · Journal of Biomedical Science · doi:10.1186/s12929-017-0384-2 · Cited by 52 · see citing works

Digital Light Processing (DLP) 3D Printing of Atomoxetine Hydrochloride Tablets Using Photoreactive Suspensions

Krkobabić, M., Medarević, D. P., Pešić, N., Vasiljević, D., Ivković, B. M., & Ibric, S. R. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12090833 · Cited by 50 · see citing works

Behavior and Mechanics of Multifunctional Materials and Composites 2014

Goulbourne, N. C. (2014) · SPIE eBooks · Cited by 45 · see citing works

The Effect of a Type I Photoinitiator on Cure Kinetics and Cell Toxicity in Projection-Microstereolithography

Bail, R., Patel, A. B., Yang, H., et al. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.044 · Cited by 44 · see citing works

Evaluation of exposure time and visible light irradiation in LCD 3D printing of ibuprofen extended release tablets

Madžarević, M., & Ibric, S. R. (2021) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2020.105688 · Cited by 42 · see citing works

Effect of a red-shifted benzotriazole UV absorber on curing depth and kinetics in visible light initiated photopolymer resins for 3D printing

Bail, R., Hong, J. Y., & Chin, B. D. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.04.017 · Cited by 40 · see citing works

Performance Improvement for Two-Lens Panoramic Endoscopic System during Minimally Invasive Surgery

Kim, D. T., Cheng, C.-H., Liu, D. G., et al. (2019) · Journal of Healthcare Engineering · doi:10.1155/2019/2097284 · Cited by 40 · see citing works

3D Printing Technology in Customized Drug Delivery System: Current State of the Art, Prospective and the Challenges

Khan, F., Narasimhan, K., Swathi, C. S. V., et al. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190110153742 · Cited by 39 · see citing works

3D Printing Technology in Pharmaceutical Drug Delivery: Prospects and Challenges

Oyewumi, M. O. (2015) · Journal of Biomolecular Research & Therapeutics · doi:10.4172/2167-7956.1000e141 · Cited by 38 · see citing works

3D Printing in Pharmaceutical Sector: An Overview

Ali, A., Ahmad, U., & Akhtar, J. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.90738 · Cited by 38 · see citing works

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

F42 Committee (2019) · doi:10.1520/isoastm52921-13r19 · Cited by 38 · see citing works

3D Printing Technology in Design of Pharmaceutical Products

Zafar, A., Alruwaili, N. K., Rizwanullah, M., Bukhari, S. N. A., Amir, M., Ahmed, M. M., & Fazil, M. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190116104620 · Cited by 37 · see citing works

Optical stereolithography of antifouling zwitterionic hydrogels

Pan, W., Wallin, T. J., Odent, J., et al. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00278b · Cited by 36 · see citing works

Made-on-demand, complex and personalized 3D-printed drug products

Osouli-Bostanabad, K., & Adibkia, K. (2018) · Bioimpacts · doi:10.15171/bi.2018.09 · Cited by 35 · see citing works

Application of 3D printing technology for generating hollow-type suppository shells

Tagami, T., Ito, E., Hayashi, N., et al. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119825 · Cited by 35 · see citing works

Introduction to rapid prototyping of biomaterials

Chua, C. K., Leong, K. F., & An, J. (2014) · Elsevier eBooks · doi:10.1533/9780857097217.1 · Cited by 30 · see citing works

Stereolithography Apparatus Evolution: Enhancing Throughput and Efficiency of Pharmaceutical Formulation Development

Curti, C., Kirby, D. J., & Russell, C. A. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13050616 · Cited by 29 · see citing works

Studies of phase transitions in the aripiprazole solid dosage form

Łaszcz, M., & Witkowska, A. B. (2015) · Journal of Pharmaceutical and Biomedical Analysis · doi:10.1016/j.jpba.2015.09.004 · Cited by 28 · see citing works

Effective and simple prediction model of drug release from “ghost tablets” fabricated using a digital light projection-type 3D printer

Tagami, T., Morimura, C., & Ozeki, T. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120721 · Cited by 28 · see citing works

Drug-releasing biopolymeric structures manufactured via stereolithography

Asikainen, S., van Bochove, B., & Seppälä, J. V. (2018) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aaf0e0 · Cited by 27 · see citing works

First 3D-printed pill

(2015) · Nature Biotechnology · doi:10.1038/nbt1015-1014a · Cited by 22 · see citing works

Locally-applied 5-fluorouracil-loaded slow-release patch prevents pancreatic cancer growth in an orthotopic mouse model

Shim, I. K., Yi, H., Yi, H., et al. (2017) · Oncotarget · doi:10.18632/oncotarget.17370 · Cited by 21 · see citing works

Rapid 3D-print-and-shrink fabrication of biodegradable microneedles with complex geometries

Ochoa, M., Zhou, J., Rahimi, R., et al. (2015) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2015.7181157 · Cited by 19 · see citing works

3D Printing: What Are the Hazards?

Randolph, S. A. (2018) · Workplace Health & Safety · doi:10.1177/2165079917750408 · Cited by 17 · see citing works

Development of a hybrid photopolymer for stereolithography

Zhiwei, G., Mo, J., Shu-huai, H., et al. (2006) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/bf02861482 · Cited by 15 · see citing works

Additive Manufacturing and 3D Printing Technology

Awari, G. K., Thorat, C. S., Ambade, V., et al. (2021) · CRC Press eBooks · doi:10.1201/9781003013853 · Cited by 14 · see citing works

Advances in Study on Three-dimensional Printing in Pharmaceutics

Zheng, F., & Sheng-wu, H. (2016) · Chinese Herbal Medicines · doi:10.1016/s1674-6384(16)60020-5 · Cited by 11 · see citing works

Preparation of a Novel Cationic Photosensitive Resin (3D-SLR01) for Stereolithography 3D Printing and Determination of Its Some Properties

Huang, B., Wu, B., Han, L., et al. (2019) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-019-2114-y · Cited by 9 · see citing works

Individually Fitted Hearing Aid Device Manufactured Using Rapid Prototyping Based on Ear CT

Chrzan, R. M., Miechowicz, S., Urbanik, A., et al. (2009) · The Neuroradiology Journal · doi:10.1177/197140090902200212 · Cited by 7 · see citing works

Artificial Intelligence: The Future Landscape of Genomic Medical Diagnosis: Dataset, In Silico Artificial Intelligent Clinical Information, and Machine Learning Systems

Baker, D. J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809414-3.00011-5 · Cited by 4 · see citing works

[A review of 3D printing via fused deposition modeling in pharmaceutics].

He, D.-L., Han, F.-G., Wang, Z., & Liu, Q. (2016) · PubMed · Cited by 4 · see citing works

3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures

Shepherd, J. N. H., Parker, S. T., Shepherd, R. F., et al. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201090118 · Cited by 4 · see citing works

Materials for 3D Printing

Noorani, R. (2017) · CRC Press eBooks · doi:10.1201/9781315155494-5 · Cited by 2 · see citing works

Stereolithography (SL)

Venuvinod, P. K., & Ma, W. (2004) · Springer eBooks · doi:10.1007/978-1-4757-6361-4_6 · Cited by 2 · see citing works

Application of PLCL as a biodegradable polymer in biomedical engineering

Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7 · see citing works

Multiscale Study on Fused Deposition Modeling and Stereolithography 3D Printed Parts: How to 3D Print Better?

O’Donahue, A., Mendenhall, R., Fouladi, K., et al. (2023) · doi:10.1115/imece2023-114519 · Cited by 2 · see citing works

3D Printed Prototypes of Cast Metal Denture Frameworks Fabricated by Laser Stereolithography Printer // Лети метални конструкции по 3D принтирани прототипи чрез лазерен стереолитографски принтер

Penchev, P. (2020) · Medical University of Varna Repository

Experimental Studies on 3D Printed Parts for Rapid Prototyping of Micro Aerial Vehicles

Chandrasekhar, U., Kulkarni, M., Esakki, B., et al. (2016) · Tamkang University Institutional Repository (TKUIR) · doi:10.6180/jase.2016.19.1.03 · Cited by 7 · see citing works

Additive Manufacturing of Bone Scaffolds Using PolyJet and Stereolithography Techniques

Rasheed, S., Lughmani, W. A., Obeidi, M. A., et al. (2021) · Applied Sciences · doi:10.3390/app11167336 · Cited by 33 · see citing works

Three dimensional (3D) printingPreprint

Fiedor, P., & Ortyl, J. (2020) · doi:10.32545/encyclopedia202007.0014.v4 · Cited by 3 · see citing works