The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
New Insights on the Strain-Induced Mesophase of Poly(d,l-lactide): In Situ WAXS and DSC Study of the Thermo-Mechanical Stability
Abstract
This work deals with the study of the mesomorphic form or mesophase induced by tensile drawing from the amorphous state of a polylactide material containing 4 mol % of d -stereoisomer units. Investigations have been carried out over the draw temperature domain 45−90 °C, i.e. an interval spanning roughly ±20 °C about the glass transition temperature. In situ WAXS experiments during drawing, stress relaxation, and/or heating of stretched samples invariably showed the strain-induced occurrence of the mesophase as far as temperature did not exceed 70 °C. This seems to be the upper stability temperature of the mesophase identified in a previous study. DSC traces upon heating of drawn samples exhibit a post glass transition endothermic peak similar to the enthalpy relaxation phenomenon observed for aged polymers. The amplitude of this strain-induced endotherm proved to be strongly dependent on draw temperature and draw ratio. Draw ratio also appeared to strongly influence the temperature domain of cold crystallization. The quite different structural evolution of the drawn samples as a function of temperature, depending whether cold crystallization occurred close or far from the strain-induced endotherm, led us to the conclusion that this endotherm results from neither physical aging nor orientation relaxation but from “melting” of the mesophase. This proposal is thoroughly supported by the insensitivity of the endotherm enthalpy to the DSC scanning rate that gives evidence of a first order thermodynamic transition in contrast to the case of aging-induced endotherm. WAXS as a function of temperature on drawn samples annealed with free ends enabled to probe the persistence of chain orientation and the stability of the strain-induced structural changes in relation to drawing conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Theory of Polymer Dynamics
Marrucci, G. (1987) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(87)85036-x · Cited by 9,749
The theory of polymer dynamics
Doi, M., & Edwards, S. F. (1986) · Cited by 8,928
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Hutchinson, J. M. (1995) · Progress in Polymer Science · doi:10.1016/0079-6700(94)00001-i · Cited by 1,045
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Cited by
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
Razavi, M., & Wang, S.-Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00595 · Cited by 212
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143
Zhou, C., Li, H., Zhang, W., Li, J., Huang, S., Meng, Y., Christiansen, J. D., Yu, D., Wu, Z., & Jiang, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.014 · Cited by 85
Xiong, Z., Liu, G., Zhang, X., Wen, T., de Vos, S., Joziasse, C., & Wang, D. (2013) · Polymer · doi:10.1016/j.polymer.2012.11.076 · Cited by 83
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Deformation of Poly-l-lactid acid (PLLA) under Uniaxial Tension and Plane-Strain Compression
Vozniak, A., & Bartczak, Z. (2021) · Polymers · doi:10.3390/polym13244432 · Cited by 11
Metadata
- Authors
- Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-08-11
- Volume
- 43
- Issue
- 17
- Pages
- 7228-7237
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2040296902
- Cited by
- 271
- References
- 43
- FWCI
- 8.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.