The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends
Abstract
Polyactide (PLA) was blended with an ethylene/ n -butyl acrylate/glycidyl methacrylate (EBA-GMA) terpolymer and a zinc ionomer of ethylene/methacrylic acid (EMAA-Zn) copolymer. The phase morphology of the resulting ternary blends and its relationship with impact behaviors were studied systematically. Dynamic vulcanization of EBA-GMA in the presence of EMAA-Zn was investigated by torque rheology, and its cross-link level was evaluated by dynamic mechanical analysis. Reactive compatibilization between PLA and EBA-GMA was studied using Fourier transform infrared spectroscopy. The dispersed domains in the ternary blends displayed a “salami”-like phase structure, in which the EMAA-Zn phase evolved from occluded subinclusions into continuous phase with decrease in the EBA-GMA/EMAA-Zn ratio. An optimum range of particle sizes of the dispersed domains for high impact toughness was identified. Also, the micromechanical deformation process of these ternary blends was also investigated by observation of the impact-fractured surfaces using the electron microscope. It was suggested that the low cavitation resistance of dispersed particles in conjunction with suitable interfacial adhesion was responsible for the optimum impact toughness observed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Mechanical Properties of Polymers and Composites
Landel, R. F., & Nielsen, L. E. (1993) · CRC Press eBooks · doi:10.1201/b16929 · Cited by 3,666
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Self-citationEffect of interfacial forces on polymer blend morphologies
HOBBS, S., DEKKERS, M., & WATKINS, V (1988) · Polymer · doi:10.1016/0032-3861(88)90269-8 · Cited by 455
Chain structure, phase morphology, and toughness relationships in polymers and blends
Wu, S. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301302 · Cited by 453
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(ε-caprolactone)
Wang, L., Ma, W., Gross, R. A., & McCarthy, S. P. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00196-1 · Cited by 339
Dilatational bands in rubber-toughened polymers
Lazzeri, A., & Bucknall, C. B. (1993) · Journal of Materials Science · doi:10.1007/bf00356433 · Cited by 328
Liu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Self-citationThe effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends
Semba, T., Kitagawa, K., Ishiaku, U. S., & Hamada, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23589 · Cited by 315
Rubber toughening of polyamides with functionalized block copolymers: 1. Nylon-6
Oshinski, A. J., Keskkula, H., & Paul, D. R. (1992) · Polymer · doi:10.1016/0032-3861(92)90984-5 · Cited by 301
Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300
Li, Y., & Shimizu, H. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.12.010 · Cited by 270
Toughening modification of PLLA/PBS blends via in situ compatibilization
Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21210 · Cited by 266
Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 254
Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer
Zhang, W., Chen, L., & Zhang, Y. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.032 · Cited by 245
Kim, G.-E., & Michler, G. H. (1998) · Polymer · doi:10.1016/s0032-3861(98)00089-5 · Cited by 242
Zhang, N., Wang, Q., Ren, J., & Wang, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3049-4 · Cited by 240
Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester amide)
Lin, Y., Zhang, K.-Y., Dong, Z.-M., Dong, L.-S., & Li, Y.-S. (2007) · Macromolecules · doi:10.1021/ma070989a · Cited by 218
Polymer Alloys of Nodax Copolymers and Poly(lactic acid)
Noda, I., Satkowski, M. M., Dowrey, A. E., & Marcott, C. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300093 · Cited by 214
Nanocavitation in Self-Assembled Amphiphilic Block Copolymer-Modified Epoxy
Liu, J. (., Sue, H.-J., Thompson, Z. J., Bates, F. S., Dettloff, M., Jacob, G., Verghese, N., & Pham, H. (2008) · Macromolecules · doi:10.1021/ma801037q · Cited by 213
Su, Z., Li, Q., Liu, Y., Hu, G.-H., & Wu, C. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.028 · Cited by 203
Wu, S. (1992) · Polymer International · doi:10.1002/pi.4990290313 · Cited by 196
Dompas, D., & Groeninckx, G. (1994) · Polymer · doi:10.1016/0032-3861(94)90727-7 · Cited by 192
Ho, C.-H., Wang, C.-H., Lin, C.-I., & Lee, Y.-D. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.054 · Cited by 190
Notched impact behavior of polymer blends: Part 1: New model for particle size dependence
Bucknall, C. B., & Paul, D. R. (2009) · Polymer · doi:10.1016/j.polymer.2009.09.059 · Cited by 186
Modification of Brittle Polylactide by Novel Hyperbranched Polymer-Based Nanostructures
Bhardwaj, R., & Mohanty, A. K. (2007) · Biomacromolecules · doi:10.1021/bm070367x · Cited by 185
Borggreve, R. J. M., Gaymans, R. J., & Eichenwald, H. M. (1989) · Polymer · doi:10.1016/0032-3861(89)90386-8 · Cited by 182
Toughening of poly(L‐lactide) by melt blending with rubbers
Ishida, S., Nagasaki, R., Chino, K., Dong, T., & Inoue, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30134 · Cited by 177
Guo, H. F., Packirisamy, S., Gvozdic, N. V., & Meier, D. J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00571-x · Cited by 165
Toughening of Polylactide with Polymerized Soybean Oil
Robertson, M. L., Chang, K., Gramlich, W. M., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma9022795 · Cited by 161
Cooper-White, J. J., & Mackay, M. E. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990801)37:15<1803::aid-polb5>3.0.co;2-m · Cited by 161
Chain entanglement, mechanical properties and drawability of poly(lactide)
Grijpma, D. W., Penning, J. P., & Pennings, A. J. (1994) · Colloid & Polymer Science · doi:10.1007/bf00652375 · Cited by 149
The role of matrix molecular weight in rubber toughened nylon 6 blends: 1. Morphology
Oshinski, A. J., Keskkula, H., & Paul, D. R. (1996) · Polymer · doi:10.1016/0032-3861(96)00373-4 · Cited by 134
van der Wal, A., Verheul, A. J. J., & Gaymans, R. J. (1999) · Polymer · doi:10.1016/s0032-3861(99)00215-3 · Cited by 124
Huang, J., Keskkula, H., & Paul, D. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.11.088 · Cited by 123
Reactive Compatibilization of Poly( l -lactide) and Conjugated Soybean Oil
Gramlich, W. M., Robertson, M. L., & Hillmyer, M. A. (2010) · Macromolecules · doi:10.1021/ma902449x · Cited by 121
On the chain stiffness of poly(lactide)s
Joziasse, C. A. P., Veenstra, H., Grijpma, D. W., & Pennings, A. J. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970713 · Cited by 112
Acid salts and the structure of ionomers
Coleman, M. M., Lee, J. Y., & Painter, P. C. (1990) · Macromolecules · doi:10.1021/ma00210a033 · Cited by 109
Oshinski, A. J., Keskkula, H., & Paul, D. R. (1996) · Polymer · doi:10.1016/0032-3861(96)00374-6 · Cited by 109
Liu, Z., Zhu, X., Wu, L., et al. (2001) · Polymer · doi:10.1016/s0032-3861(00)00375-x · Cited by 105
Dompas, D., Groeninckx, G., Isogawa, M., Hasegawa, T., & Kadokura, M. (1994) · Polymer · doi:10.1016/0032-3861(94)90728-5 · Cited by 90
Schreck, K. M., & Hillmyer, M. A. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.03.017 · Cited by 88
Cho, K., Yang, J., & Park, C. E. (1998) · Polymer · doi:10.1016/s0032-3861(97)10036-2 · Cited by 77
Cavitation debonding during deformation of rubber-modified poly(vinyl chloride)
Dompas, D., Groeninckx, G., Isogawa, M., Hasegawa, T., & Kadokura, M. (1995) · Polymer · doi:10.1016/0032-3861(95)91338-8 · Cited by 73
Zhang, J., & Sun, X. S. (2004) · Polymer International · doi:10.1002/pi.1457 · Cited by 67
Self-citationOshinski, A. J., Keskkula, H., & Paul, D. R. (1996) · Journal of Applied Polymer Science · Cited by 60
Cho, K., Yang, J., & Park, C. E. (1997) · Polymer · doi:10.1016/s0032-3861(97)00052-9 · Cited by 54
Takaki, A., Yasui, H., & Narisawa, I. (1997) · Polymer Engineering and Science · doi:10.1002/pen.11651 · Cited by 44
Phase Structure of Compatibilized Poly(Lactic Acid)/Linear Low-Density Polyethylene Blends
Su, Z., Li, Q., Liu, Y., Xu, H., Guo, W., & Wu, C. (2009) · Journal of Macromolecular Science Part B · doi:10.1080/00222340902956327 · Cited by 20
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Self-citationSuper tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Metadata
- Authors
- Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-16
- Volume
- 44
- Issue
- 6
- Pages
- 1513-1522
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2009622169
- Cited by
- 317
- References
- 52
- FWCI
- 17.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
