The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Polymer of Intrinsic Microporosity Incorporating Thioamide Functionality: Preparation and Gas Transport Properties
Abstract
A novel polymer of intrinsic microporosity, thioamide-PIM-1, has been prepared by postmodification of PIM-1, using phosphorus pentasulfide as a thionating agent in the presence of sodium sulfite. The chemistry was first tested on a low molecular weight model compound, 3,13-dicyanobenzo-1,2,4′,5′-bis(1,4-benzodioxane). For the polymer, up to 80% conversion of nitrile to thioamide was achieved. Modification leads to a reduction in the BET surface area of the polymer, from 770 m 2 g –1 for the parent PIM-1 to 263 m 2 g –1 on 80% conversion of nitrile to thioamide. After modification, the polymer is no longer soluble in chlorinated solvents such as CHCl 3, but is soluble in polar aprotic solvents such as THF, DMF, DMSO, and DMAc. Self-supported membranes of thioamide-PIM-1 were cast from THF. Single gas permeability measurements showed increased selectivities but reduced permeabilities compared to the parent polymer. Ethanol treatment, which removes occluded THF as well as enhancing free volume, has a pronounced effect on membrane permeability. For the as-prepared membrane, an ideal CO 2 /N 2 selectivity of 38.5 was achieved with a CO 2 permeability of 150 barrer. Ethanol treatment increased the CO 2 permeability to 1120 barrer, with a decrease in CO 2 /N 2 ideal selectivity to 30.3.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Park, G. S. (1975) · Polymer · doi:10.1016/0032-3861(75)90130-5 · Cited by 14,967
Robeson, L. M. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.030 · Cited by 5,917
The Handbook of infrared and Raman characteristic frequencies of organic molecules
(1992) · Choice Reviews Online · doi:10.5860/choice.29-5702 · Cited by 4,575
Correlation of separation factor versus permeability for polymeric membranes
Robeson, L. M. (1991) · Journal of Membrane Science · doi:10.1016/0376-7388(91)80060-j · Cited by 3,465
Membrane Gas Separation: A Review/State of the Art
Bernardo, P., Drioli, E., & Golemme, G. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8019032 · Cited by 2,147
Self-citationBudd, P. M., Ghanem, B. S., Makhseed, S., McKeown, N. B., Msayib, K. J., & Tattershall, C. E. (2004) · Chemical Communications · doi:10.1039/b311764b · Cited by 1,366
Self-citationEverett, D. H. (1972) · Pure and Applied Chemistry · doi:10.1351/pac197231040577 · Cited by 1,170
Solution‐Processed, Organophilic Membrane Derived from a Polymer of Intrinsic Microporosity
Budd, P. M., Elabas, E. S., Ghanem, B. S., Makhseed, S., McKeown, N. B., Msayib, K. J., Tattershall, C. E., & Wang, D. (2004) · Advanced Materials · doi:10.1002/adma.200306053 · Cited by 932
Self-citationGas separation membranes from polymers of intrinsic microporosity
BUDD, P., MSAYIB, K., TATTERSHALL, C., GHANEM, B., REYNOLDS, K., MCKEOWN, N., & FRITSCH, D. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.01.009 · Cited by 893
Self-citationPolymer nanosieve membranes for CO2-capture applications
Du, N., Park, H. B., Robertson, G. P., Dal-Cin, M. M., Visser, T., Scoles, L., & Guiver, M. D. (2011) · Nature Materials · doi:10.1038/nmat2989 · Cited by 805
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
An Efficient Polymer Molecular Sieve for Membrane Gas Separations
Carta, M., Malpass-Evans, R., Croad, M., Rogan, Y., Jansen, J. C., Bernardo, P., Bazzarelli, F., & McKeown, N. B. (2013) · Science · doi:10.1126/science.1228032 · Cited by 1,119
Self-citationComesaña-Gándara, B., Chen, J., Bezzu, C. G., Carta, M., Rose, I., Ferrari, M.-C., Esposito, E., Fuoco, A., Jansen, J. C., & McKeown, N. B. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01384a · Cited by 953
Self-citationGas Permeation Properties, Physical Aging, and Its Mitigation in High Free Volume Glassy Polymers
Low, Z.-X., Budd, P. M., McKeown, N. B., & Patterson, D. A. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00629 · Cited by 626
Self-citationRigid and microporous polymers for gas separation membranes
Kim, S., & Lee, Y. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.10.005 · Cited by 462
Metadata
- Authors
- Mason, C. R., Maynard-Atem, L., Al-Harbi, N. M., Budd, P. M., Bernardo, P., Bazzarelli, F., Clarizia, G., & Jansen, J. C.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-07-27
- Volume
- 44
- Issue
- 16
- Pages
- 6471-6479
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2171748011
- Cited by
- 269
- References
- 14
- FWCI
- 30.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymer of Intrinsic Microporosity Incorporating Thioamide Functionality: Preparation and Gas Transport Properties. https://app.cochat.ai/papers/10.1021/ma200918h
- The paper
- Mason, C. R., Maynard-Atem, L., Al-Harbi, N. M., Budd, P. M., Bernardo, P., Bazzarelli, F., Clarizia, G., & Jansen, J. C. (2011). Polymer of Intrinsic Microporosity Incorporating Thioamide Functionality: Preparation and Gas Transport Properties. Macromolecules. https://doi.org/10.1021/ma200918h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.