The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Toward Tailorable Porous Organic Polymer Networks: A High-Temperature Dynamic Polymerization Scheme Based on Aromatic Nitriles
Abstract
Triazine-based polymer scaffolds with controllable porosity were prepared through a dynamic polymerization scheme based on a broad variety of aromatic nitriles, upon polytrimerization of the latter from ZnCl 2 salt melts at high temperatures. In the present study, the reaction parameters such as the temperature and monomer concentration as well as the geometry and functionality of the monomers were systematically varied. A comprehensive overview of the influences of these parameters on the outcome of the polymerization reaction in terms of chemical nature and porous properties of the materials is proposed. Rather than the variation of the monomer size and/or geometry, the reaction parameters were found to play a crucial role for tuning the porosity of the materials and especially the reaction temperature. Finally, the use of functional aromatic bridging units allowed the formation of functional polymer scaffolds with the ability to coordinate metal salts, introducing the possibility to design new metallo-organic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Porous, Crystalline, Covalent Organic Frameworks
Côté, A. P., Benin, A. I., Ockwig, N. W., O'Keeffe, M., Matzger, A. J., & Yaghi, O. M. (2005) · Science · doi:10.1126/science.1120411 · Cited by 8,357
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Porous, Covalent Triazine‐Based Frameworks Prepared by Ionothermal Synthesis
Kuhn, P., Antonietti, M., & Thomas, A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705710 · Cited by 2,634
Self-citationDesigned Synthesis of 3D Covalent Organic Frameworks
El-Kaderi, H. M., Hunt, J. R., Mendoza-Cortés, J. L., Côté, A. P., Taylor, R. E., O'Keeffe, M., & Yaghi, O. M. (2007) · Science · doi:10.1126/science.1139915 · Cited by 2,575
Open-Framework Inorganic Materials
Cheetham, A. K., Férey, G., & Loiseau, T. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19991115)38:22<3268::aid-anie3268>3.0.co;2-u · Cited by 2,426
Recent Progress in the Synthesis of Porous Carbon Materials
Lee, J., Kim, J., & Hyeon, T. (2006) · Advanced Materials · doi:10.1002/adma.200501576 · Cited by 2,127
McKeown, N. B., & Budd, P. M. (2006) · Chemical Society Reviews · doi:10.1039/b600349d · Cited by 1,747
Conjugated Microporous Poly(aryleneethynylene) Networks
Jiang, J., Su, F., Trewin, A., Wood, C. D., Campbell, N. L., Niu, H., Dickinson, C., Ganin, A. Y., Rosseinsky, M. J., Khimyak, Y. Z., et al. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701595 · Cited by 1,465
Walton, K. S., & Snurr, R. Q. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071174k · Cited by 1,029
Cited by
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Functional carbon nitride materials — design strategies for electrochemical devices
Kessler, F. K., Zheng, Y., Schwarz, D., Merschjann, C., Schnick, W., Wang, X., & Bojdys, M. J. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.30 · Cited by 1,075
Porous Organic Polymers in Catalysis: Opportunities and Challenges
Kaur, P., Hupp, J. T., & Nguyen, S. T. (2011) · ACS Catalysis · doi:10.1021/cs200131g · Cited by 932
Functional Materials: From Hard to Soft Porous Frameworks
Thomas, A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000167 · Cited by 780
Self-citationRen, S., Bojdys, M. J., Dawson, R., Laybourn, A., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2012) · Advanced Materials · doi:10.1002/adma.201200751 · Cited by 763
Polymer photocatalysts for solar-to-chemical energy conversion
Banerjee, T., Podjaski, F., Kröger, J., Biswal, B. P., & Lotsch, B. V. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00254-z · Cited by 763
Salt melt synthesis of ceramics, semiconductors and carbon nanostructures
Liu, X., Fechler, N., & Antonietti, M. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60159e · Cited by 688
Self-citationIodine capture in porous organic polymers and metal–organic frameworks materials
Xie, W., Cui, D., Zhang, S.-R., Xu, Y.-H., & Jiang, D.-L. (2019) · Materials Horizons · doi:10.1039/c8mh01656a · Cited by 622
Solid Catalysts for the Selective Low‐Temperature Oxidation of Methane to Methanol
Palkovits, R., Antonietti, M., Kuhn, P., Thomas, A., & Schüth, F. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200902009 · Cited by 558
Self-citationZhao, Y., Yao, K. X., Teng, B., Zhang, T., & Han, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42548g · Cited by 525
Hao, L., Ning, J., Luo, B., Wang, B., Zhang, Y., Tang, Z., Yang, J., Thomas, A., & Zhi, L. (2015) · Journal of the American Chemical Society · doi:10.1021/ja508693y · Cited by 438
Self-citationCovalent Triazine Frameworks Prepared from 1,3,5-Tricyanobenzene
Katekomol, P., Roeser, J., Bojdys, M., Weber, J., & Thomas, A. (2013) · Chemistry of Materials · doi:10.1021/cm303751n · Cited by 436
Self-citationPorous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
A Salicylbisimine Cage Compound with High Surface Area and Selective CO2/CH4 Adsorption
Mastalerz, M., Schneider, M. W., Oppel, I. M., & Presly, O. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005301 · Cited by 427
Conjugated porous polymers for energy applications
Vilela, F., Zhang, K., & Antonietti, M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22002d · Cited by 422
Self-citationPorous organic polymers for CO2capture, separation and conversion
Song, K. S., Fritz, P. W., & Coskun, A. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00727d · Cited by 409
Functionalized Conjugated Microporous Polymers
Dawson, R., Laybourn, A., Clowes, R., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2009) · Macromolecules · doi:10.1021/ma901801s · Cited by 375
Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device
Sakaushi, K., Hosono, E., Nickerl, G., Gemming, T., Zhou, H., Kaskel, S., & Eckert, J. (2013) · Nature Communications · doi:10.1038/ncomms2481 · Cited by 366
Charged Covalent Triazine Frameworks for CO2 Capture and Conversion
Buyukcakir, O., Je, S. H., Talapaneni, S. N., Kim, D., & Coskun, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16769 · Cited by 356
Porous covalent–organic materials: synthesis, clean energy application and design
Xiang, Z., & Cao, D. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00063f · Cited by 351
Phenyl-triazine oligomers for light-driven hydrogen evolution
Schwinghammer, K., Hug, S., Mesch, M. B., Senker, J., & Lotsch, B. V. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02574e · Cited by 273
Roeser, J., Kailasam, K., & Thomas, A. (2012) · ChemSusChem · doi:10.1002/cssc.201200091 · Cited by 270
Self-citationMicroporous Functionalized Triazine-Based Polyimides with High CO2 Capture Capacity
Liebl, M. R., & Senker, J. (2013) · Chemistry of Materials · doi:10.1021/cm4000894 · Cited by 269
Fernández, A., Ruiz-Bermejo, M., & de la Fuente, J. L. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp01662c · Cited by 25
Machine Learning‐Assisted Design of Nitrogen‐Rich Covalent Triazine Frameworks Photocatalysts
Wu, M., Song, Z., Cui, Y., Fu, Z., Hong, K., Li, Q., Lyu, Z., Liu, W., & Wang, J. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202413453 · Cited by 17
Metadata
- Authors
- Kuhn, P., Thomas, A., & Antonietti, M.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-09
- Volume
- 42
- Issue
- 1
- Pages
- 319-326
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2063106084
- Cited by
- 340
- References
- 25
- FWCI
- 5.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.