The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Influence of Macromolecular Architecture on the Crystallization of (PCL2)-b-(PS2) 4-Miktoarm Star Block Copolymers in Comparison to Linear PCL-b-PS Diblock Copolymer Analogues
Abstract
Miktoarm block copolymers (A 2 B 2 ) composed of two poly(ε-caprolactone) (PCL) arms and two polystyrene arms (PS) were synthesized by a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Linear analogue PCL- b -PS diblock copolymer samples were also synthesized in almost identical composition regarding the content of each component. Almost all samples were found to be weakly segregated in the melt according to small angle X-ray scattering (SAXS) experiments. While the expected morphology (revealed by transmission electron microscopy, TEM) was found for the linear diblock copolymers, the miktoarm block copolymer samples exhibited different morphologies that indicated more entropic restrictions for chain stretching. For example, when a linear diblock copolymer with 41% PCL formed lamellae, the analogue miktoarm star copolymer with 39% PCL formed hexagonally packed PCL cylinders in a PS matrix. These results may imply changes in the phase diagram between miktoarm and linear block copolymers that have been previously predicted theoretically, however a larger number of samples should be used to corroborate this hypothesis. Additionally, the effect of polydispersity of the samples as a possible source of phase boundary variations should also be considered. The enhanced topological restrictions in the miktoarm star copolymers were also strongly reflected in the overall crystallization kinetics of the PCL component within the copolymers, as determined by differential scanning calorimetry (DSC). The supercooling needed for crystallization of the PCL component was much larger for the miktoarm star copolymers than for the linear analogue block copolymer samples of similar composition or even of similar morphology, while the crystallization rate was also depressed. The degree of crystallinity of the micro- or nanodomains was also a function of composition (decrease with PS content in the copolymers) or molecular architecture (lower in the stars than in linear copolymers) and as a general rule decreased as the level of confinement for the PCL component increased. Several kinetic theories of crystallization were applied to the overall isothermal crystallization data and regardless of the theory employed, the parameters proportional to the energy barriers for overall crystallization also increased with the confinement of the PCL component. Both the confinement degree and the influence of molecular architecture on the nucleation and crystallization of the PCL component generally increased with the content of covalently bonded glassy PS.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“observing that miktoarms and linear copolymers of similar composition have different morphology.”
From Fractionated crystallization in semicrystalline polymers (2021) · cites this paper as [118]
In the citing paper
“According to the SAXS results, the copolymers are segregated in the melt.”
From Fractionated crystallization in semicrystalline polymers (2021) · cites this paper as [118]
Citations
Cites
The physics of block copolymers
(1999) · Choice Reviews Online · doi:10.5860/choice.37-1566 · Cited by 1,548
Crystallization Within Block Copolymer Mesophases
Loo, Y., & Register, R. A. (2004) · Developments in Block Copolymer Science and Technology · doi:10.1002/0470093943.ch6 · Cited by 85
Cited by
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Confined crystallization of polymeric materials
Michell, R. M., & Müller, A. J. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.10.007 · Cited by 351
Differential Scanning Calorimetry of Polymers
Müller, A. J., & Michell, R. M. (2016) · Polymer Morphology · doi:10.1002/9781118892756.ch5 · Cited by 196
The contemporary role of ε-caprolactone chemistry to create advanced polymer architectures
Sisson, A. L., Ekinci, D., & Lendlein, A. (2013) · Polymer · doi:10.1016/j.polymer.2013.04.045 · Cited by 190
Michell, R. M., Mugica, A., Zubitur, M., & Müller, A. J. (2015) · Advances in Polymer Science · doi:10.1007/12_2015_327 · Cited by 159
Self-citation
Metadata
- Authors
- Lorenzo, A. T., Müller, A. J., Lin, M.-C., Chen, H.-L., Jeng, U.-S., Priftis, D., Pitsikalis, M., & Hadjichristidis, N.
- Affiliations
- Universidad Simón Bolívar (VE)
- National Tsing Hua University (TW)
- National Synchrotron Radiation Research Center (TW)
- National and Kapodistrian University of Athens (GR)
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-10
- Volume
- 42
- Issue
- 21
- Pages
- 8353-8364
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2121861620
- Cited by
- 42
- References
- 2
- Citations by year
- 2023: 4 · 2022: 5 · 2021: 5 · 2020: 4 · 2019: 1 · 2018: 1 · 2017: 1 · 2016: 2 · 2015: 5 · 2014: 3 · 2013: 2 · 2012: 2
- FWCI
- 1.45
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- polycaprolactone, polystyrene, block copolymer crystallization, crystallization kinetics, macromolecular architecture, topological constraints, confinement effects, lamellar morphology, phase separation, polydispersity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of Macromolecular Architecture on the Crystallization of (PCL2)-b-(PS2) 4-Miktoarm Star Block Copolymers in Comparison to Linear PCL-b-PS Diblock Copolymer Analogues. https://app.cochat.ai/papers/10.1021/ma901289t
- The paper
- Lorenzo, A. T., Müller, A. J., Lin, M.-C., Chen, H.-L., Jeng, U.-S., Priftis, D., Pitsikalis, M., & Hadjichristidis, N. (2009). Influence of Macromolecular Architecture on the Crystallization of (PCL2)-b-(PS2) 4-Miktoarm Star Block Copolymers in Comparison to Linear PCL-b-PS Diblock Copolymer Analogues. Macromolecules. https://doi.org/10.1021/ma901289t
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.