Ultralight Multiwalled Carbon Nanotube Aerogel
Open accessThe DOI matches its Crossref record; 60 of the 62 references it cites were found in a registry or an index.
Abstract
Ultralight multiwalled carbon nanotube (MWCNT) aerogel is fabricated from a wet gel of well-dispersed pristine MWCNTs. On the basis of a theoretical prediction that increasing interaction potential between CNTs lowers their critical concentration to form an infinite percolation network, poly(3-(trimethoxysilyl) propyl methacrylate) (PTMSPMA) is used to disperse and functionalize MWCNTs where the subsequent hydrolysis and condensation of PTMSPMA introduces strong and permanent chemical bonding between MWCNTs. The interaction is both experimentally and theoretically proven to facilitate the formation of a MWCNT percolation network, which leads to the gelation of MWCNT dispersion at ultralow MWCNT concentration. After removing the liquid component from the MWCNT wet gel, the lightest ever free-standing MWCNT aerogel monolith with a density of 4 mg/cm(3) is obtained. The MWCNT aerogel has an ordered macroporous honeycomb structure with straight and parallel voids in 50-150 μm separated by less than 100 nm thick walls. The entangled MWCNTs generate mesoporous structures on the honeycomb walls, creating aerogels with a surface area of 580 m(2)/g which is much higher than that of pristine MWCNTs (241 m(2)/g). Despite the ultralow density, the MWCNT aerogels have an excellent compression recoverable property as demonstrated by the compression test. The aerogels have an electrical conductivity of 3.2 × 10(-2) S·cm(-1) that can be further increased to 0.67 S·cm(-1) by a high-current pulse method without degrading their structures. The excellent compression recoverable property, hierarchically porous structure with large surface area, and high conductivity grant the MWCNT aerogels exceptional pressure and chemical vapor sensing capabilities.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“the conductivity of the NCS backbone determined to be Z2 S cm À1 , much higher than for typical well-pressed carbon powders (3-30 mS cm À1 ).17,18”
From Scalable nanoporous carbon films allow line-of-sight 3D atomic layer deposition of Pt: towards a new generation catalyst layer for PEM fuel cells. (2021) · cites this paper as [18]
Citations
Cites
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes
Wong, E. W., Sheehan, P. E., & Lieber, C. M. (1997) · Science · doi:10.1126/science.277.5334.1971 · Cited by 4,810
Self-Oriented Regular Arrays of Carbon Nanotubes and Their Field Emission Properties
Fan, S., Chapline, M. G., Franklin, N. R., Tombler, T. W., Cassell, A. M., & Dai, H. (1999) · Science · doi:10.1126/science.283.5401.512 · Cited by 2,998
Transparent, Conductive Carbon Nanotube Films
Wu, Z., Chen, Z., Du, X., Logan, J. M., Sippel, J., Nikolou, M., Kamaras, K., Reynolds, J. R., Tanner, D. B., Hebard, A. F., et al. (2004) · Science · doi:10.1126/science.1101243 · Cited by 2,959
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Strong, Transparent, Multifunctional, Carbon Nanotube Sheets
Zhang, M., Fang, S., Zakhidov, A. A., Lee, S. B., Aliev, A. E., Williams, C. D., Atkinson, K. R., & Baughman, R. H. (2005) · Science · doi:10.1126/science.1115311 · Cited by 1,667
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
Research works printed but not linked: 1
- Webb P. A., 1997, Analytical Methods in Fine Particle Technology
Cited by
Items 101–200 of 513
Covalent assembly of 3D graphene/polypyrrole foams for oil spill cleanup
Li, H., Liu, L., & Yang, F. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00166k · Cited by 147
Pan, Z., Nishihara, H., Iwamura, S., Sekiguchi, T., Sato, A., Isogai, A., Kang, F., Kyotani, T., & Yang, Q. (2016) · ACS Nano · doi:10.1021/acsnano.6b05808 · Cited by 148
Artificial intelligence-enabled smart mechanical metamaterials: advent and future trends
Jiao, P., & Alavi, A. H. (2020) · International Materials Reviews · doi:10.1080/09506608.2020.1815394 · Cited by 156
Carbon Quantum Dot-Functionalized Aerogels for NO2 Gas Sensing
Wang, R., Li, G., Dong, Y., Chi, Y., & Chen, G. (2013) · Analytical Chemistry · doi:10.1021/ac401880h · Cited by 139
Dudchenko, A. V., Rolf, J., Shi, L., Olivas, L., Duan, W., & Jassby, D. (2015) · ACS Nano · doi:10.1021/acsnano.5b04880 · Cited by 138
Overview of organic–inorganic hybrid silica aerogels: Progress and perspectives
Meti, P., Mahadik, D. B., Lee, K., Wang, Q., Kanamori, K., Gong, Y., & Park, H. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111091 · Cited by 142
Kuang, J., Dai, Z., Liu, L., Yang, Z., Jin, M., & Zhang, Z. (2015) · Nanoscale · doi:10.1039/c5nr00841g · Cited by 141
Xu, X., Guan, C., Xu, L., Tan, Y. H., Zhang, D., Wang, Y., Zhang, H., Blackwood, D. J., Wang, J., Li, M., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b08191 · Cited by 137
Dasgupta, A., Rajukumar, L. P., Rotella, C., Lei, Y., & Terrones, M. (2016) · Nano Today · doi:10.1016/j.nantod.2016.12.011 · Cited by 130
Highly Elastic and Conductive N‐Doped Monolithic Graphene Aerogels for Multifunctional Applications
Moon, I. K., Yoon, S., Chun, K., & Oh, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502395 · Cited by 127
Sorption as a rapidly response for oil spill accidents: A material and mechanistic approach
Oliveira, L. M. T. M., Saleem, J., Bazargan, A., Duarte, J. L. D. S., McKay, G., & Meili, L. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124842 · Cited by 130
Mechanically strong fully biobased anisotropic cellulose aerogels
Chen, B., Zheng, Q., Zhu, J., Li, J., Cai, Z., Chen, L., & Gong, S. (2016) · RSC Advances · doi:10.1039/c6ra19280g · Cited by 123
Recent progress of flexible and wearable strain sensors for human-motion monitoring
Ge, G., Huang, W., Shao, J., & Dong, X. (2018) · Journal of Semiconductors · doi:10.1088/1674-4926/39/1/011012 · Cited by 132
Joule Heating Characteristics of Emulsion‐Templated Graphene Aerogels
Menzel, R., Barg, S., Miranda, M., Anthony, D. B., Bawaked, S. M., Mokhtar, M., Al‐Thabaiti, S. A., Basahel, S. N., Saiz, E., & Shaffer, M. S. P. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401807 · Cited by 121
Ultrafast Dynamic Pressure Sensors Based on Graphene Hybrid Structure
Liu, S., Wu, X. Y., Zhang, D., Guo, C., Wang, P., Hu, W., Li, X., Zhou, X., Xu, H., Luo, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07311 · Cited by 122
Ultralight, Strong, Three-Dimensional SiC Structures
Chabi, S., Rocha, V. G., García‐Tuñón, E., Ferraro, C., Saiz, E., Xia, Y., & Zhu, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b05533 · Cited by 123
Preparation of stable carbon nanotube aerogels with high electrical conductivity and porosity
Kohlmeyer, R. R., Lor, M., Deng, J. C., Liu, H., & Chen, J. (2011) · Carbon · doi:10.1016/j.carbon.2011.02.001 · Cited by 120
Emerging Carbon‐Nanofiber Aerogels: Chemosynthesis versus Biosynthesis
Wu, Z., Liang, H., Hu, B., & Yu, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201802663 · Cited by 119
Nanostructure of Aerogels and Their Applications in Thermal Energy Insulation
Noroozi, M., Panahi‐Sarmad, M., Abrisham, M., Amirkiai, A., Asghari, N., Golbaten‐Mofrad, H., Karimpour‐Motlagh, N., Goodarzi, V., Bahramian, A. R., & Zahiri, B. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01157 · Cited by 120
Hu, P., Long, M., Bai, X. F., Wang, C., Cai, C., Fu, J., Zhou, B., & Zhou, Y. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.03.010 · Cited by 116
Ultralight Multifunctional Carbon‐Based Aerogels by Combining Graphene Oxide and Bacterial Cellulose
Li, C., Wu, Z., Liang, H., Chen, J., & Yu, S. (2017) · Small · doi:10.1002/smll.201700453 · Cited by 113
Graphene Oxide: An All-in-One Processing Additive for 3D Printing
García‐Tuñón, E., Feilden, E., Zheng, H. Y., D’Elia, E., Leong, A., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07717 · Cited by 114
Li, M., Jia, L., Zhang, X.-P., Yan, D., Zhang, Q., & Li, Z. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.06.052 · Cited by 114
Xu, J., Chang, Z., Yin, Y., & Zhang, X. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00120 · Cited by 113
Zhang, X., Zhao, J., He, X. C., Li, Q., Ao, C., Xia, T. D., Zhang, W., Lu, C., & Deng, Y. (2017) · Carbon · doi:10.1016/j.carbon.2017.10.083 · Cited by 113
Self-citationKaramikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
Aerogels based on carbon nanomaterials
Araby, S., Qiu, A., Wang, R., Zhao, Z., Wang, C., & Ma, J. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0141-z · Cited by 114
Graphene-based hybrid aerogels for energy and environmental applications
Zhang, X., Zhou, J., Zheng, Y., Wei, H., & Su, Z. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129700 · Cited by 106
Carbon aerogel evolution: Allotrope, graphene-inspired, and 3D-printed aerogels
Chandrasekaran, S., Campbell, P. G., Baumann, T. F., & Worsley, M. A. (2017) · Journal of Materials Research · doi:10.1557/jmr.2017.411 · Cited by 99
Estili, M., & Sakka, Y. (2014) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/15/6/064902 · Cited by 107
Li, K., Zhou, M., Liang, L., Jiang, L., & Wang, W. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.03.076 · Cited by 106
Allahbakhsh, A., & Bahramian, A. R. (2015) · Nanoscale · doi:10.1039/c5nr03855c · Cited by 104
Li, X., Wang, J., Zhao, Y., & Zhang, X. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04081 · Cited by 101
Song, Z., Chen, X., Gong, X., Gao, X., Dai, Q., Nguyen, T. T., & Guo, M. (2020) · Optical Materials · doi:10.1016/j.optmat.2019.109642 · Cited by 100
Agrawal, R., Nieto, A., Chen, H., Mora, M., & Agarwal, A. K. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4038678 · Cited by 98
Macroscopic Carbon Nanotube‐based 3D Monoliths
Du, R., Zhao, Q., Zhang, N., & Zhang, J. (2015) · Small · doi:10.1002/smll.201403170 · Cited by 97
Ribadeneyra, M. C., González, M. G., Elías, A. L., Rajukumar, L. P., Baselga, J., Terrones, M., & Pozuelo, J. (2014) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201409151 · Cited by 96
Fard, A. K., McKay, G., Manawi, Y. M., Malaibari, Z. O., & Atieh, M. A. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.08.099 · Cited by 99
Recent progress and future prospects in development of advanced materials for nanofiltration
Doménech, N. G., Purcell‐Milton, F., & Gun’ko, Y. K. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100888 · Cited by 100
Silane bonded graphene aerogels with tunable functionality and reversible compressibility
Guan, L., Gao, J.-F., Pei, Y.-B., Zhao, L., Gong, L., Wan, Y., Zhou, H., Zheng, N., Du, X.-S., Wu, L., et al. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.022 · Cited by 94
Wang, H., Gong, Y., & Wang, Y. (2014) · RSC Advances · doi:10.1039/c4ra08446b · Cited by 97
Polyimide Cellulose Nanocrystal Composite Aerogels
Nguyen, B. N., Cudjoe, E., Douglas, A., Scheiman, D. A., McCorkle, L., Meador, M. A. B., & Rowan, S. J. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b01573 · Cited by 93
Wan, W., Lin, Y., Prakash, A., & Zhou, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07211a · Cited by 95
Role of polymers in the design of 3D carbon nanotube-based scaffolds for biomedical applications
Serrano, M. C., Gutiérrez, M. C., & del Monte, F. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.02.004 · Cited by 98
Mechanical analyses of “Shellular”, an ultralow-density material
Lee, M. G., Lee, J. W., Han, S. C., & Kang, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.040 · Cited by 92
Chen, T., Li, M., Zhou, L., Ding, X., Lin, D., Duan, T., Yang, G., He, R., & Zhu, W. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c00910 · Cited by 92
Particle redistribution and structural defect development during ice templating
Lasalle, A., Guizard, C., Maire, É., Adrien, J., & Deville, S. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.02.023 · Cited by 91
Carbon-dot-aerogel sensor for aromatic volatile organic compounds
Dolai, S., Bhunia, S. K., & Jelinek, R. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.10.124 · Cited by 90
Nguyen, S. T., Nguyen, H. T., Rinaldi, A., Nguyen, N., Fan, Z., & Duong, H. M. (2012) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2012.08.048 · Cited by 89
Aerogels Derived from Polymer Nanofibers and Their Applications
Qian, Z., Wang, Z., Zhao, N., & Xu, J. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700724 · Cited by 88
Zeng, Z., Wang, C., Wu, T., Han, D., Luković, M., Pan, F., Siqueira, G. D. F., & Nyström, G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05961g · Cited by 88
Zhang, Q., Du, Z., Hou, M., Ding, Z., Huang, X., Chen, A., Ma, Y., Lu, S., & Tang, X. (2021) · Carbon · doi:10.1016/j.carbon.2021.11.047 · Cited by 90
Xu, T., Ding, Y., Wang, Z., Zhao, Y. S., Wu, W., Fong, H., & Zhu, Z. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03456c · Cited by 88
Moud, A. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.148 · Cited by 90
Three-dimensional carbon nanotube based polymer composites for thermal management
Cho, E.-C., Chang-Jian, C.-W., Hsiao, Y., Lee, K.-C., & Huang, J.-H. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.08.035 · Cited by 85
Liang, H., Guan, Q., Chen, L., Zhu, Z., Zhang, W., & Yu, S. (2012) · Angewandte Chemie · doi:10.1002/ange.201200710 · Cited by 84
Huang, Z., Qin, R., Zhang, H., Guo, M., Zhang, D., Gao, C., Gao, F., Chen, X., Terrones, M., & Wang, Y. (2023) · Carbon · doi:10.1016/j.carbon.2023.118150 · Cited by 84
Maloney, K. J., Roper, C. S., Jacobsen, A. J., Carter, W. B., Valdevit, L., & Schaedler, T. A. (2013) · APL Materials · doi:10.1063/1.4818168 · Cited by 82
Hao, B., Mu, L., Ma, Q., Yang, S., & Ma, P. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.017 · Cited by 82
Li, X., Ling, S., Zeng, L., He, H., Liu, X., & Zhang, C. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200233 · Cited by 83
Fabrication of Highly Stretchable Conductors via Morphological Control of Carbon Nanotube Network
Lin, L., Liu, S., Fu, S., Zhang, S., Deng, H., & Fu, Q. (2013) · Small · doi:10.1002/smll.201202306 · Cited by 82
Peng, Q.-Y., Qin, Y.-Y., Zhao, X., Sun, X.-X., Chen, Q., Xu, F., Lin, Z.-S., Yuan, Y., Li, Y., Li, J., et al. (2017) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.7b14604 · Cited by 76
Nanotechnology-based remediation of petroleum impurities from water
Kharisov, B. I., Dias, H. V. R., & Kharissova, O. V. (2014) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2014.09.013 · Cited by 81
Fabrication and morphology tuning of graphene oxide nanoscrolls
Amadei, C. A., Stein, I. Y., Silverberg, G. J., Wardle, B. L., & Vecitis, C. D. (2016) · Nanoscale · doi:10.1039/c5nr07983g · Cited by 81
Ge, D., Yang, L., Honglawan, A., Li, J., & Yang, S. M. (2014) · Chemistry of Materials · doi:10.1021/cm404025g · Cited by 78
Hayase, G., Nonomura, K., Hasegawa, G., Kanamori, K., & Nakanishi, K. (2014) · Chemistry of Materials · doi:10.1021/cm503993n · Cited by 78
Liu, T., Mai, X., Chen, H., Ren, J., Liu, Z., Li, Y., Gao, L., Wang, N., Zhang, J., He, H., et al. (2018) · Nanoscale · doi:10.1039/c7nr09260a · Cited by 77
Machine intelligence accelerated design of conductive MXene aerogels with programmable properties
Shrestha, S., Barvenik, K., Chen, T., Yang, H., Li, Y., Kesavan, M. M., Little, J. M., Whitley, H. C., Teng, Z., Luo, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-49011-8 · Cited by 87
Nie, C., Peng, Z., Yang, Y., Cheng, C., Ma, L., & Zhao, C. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.061 · Cited by 76
Shen, Y. Q., Li, L., Xiao, K., & Xi, J. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00030 · Cited by 75
Aranaz, I., Gutiérrez, M. C., Ferrer, M. L., & del Monte, F. (2014) · Marine Drugs · doi:10.3390/md12115619 · Cited by 74
Mechanical modeling and simulation of aerogels: A review
Patil, S. P., Parale, V. G., Park, H., & Markert, B. A. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.09.181 · Cited by 132
Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor
Mahmoudpour, M., Dolatabadi, J. E. N., Hasanzadeh, M., & Soleymani, J. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102550 · Cited by 73
Ice Shaping Properties, Similar to That of Antifreeze Proteins, of a Zirconium Acetate Complex
Deville, S., Viazzi, C., Leloup, J., Lasalle, A., Guizard, C., Maire, É., Adrien, J., & Grémillard, L. (2011) · PLoS ONE · doi:10.1371/journal.pone.0026474 · Cited by 73
Parmar, K. R., Dora, D. T. K., Pant, K. K., & Roy, S. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.04.017 · Cited by 72
Ultra-lightweight paper foams: processing and properties
Madani, A., Zeinoddini, S. S., Varahmi, S., Turnbull, H., Phillion, A. B., Olson, J. A., & Martinez, D. M. (2014) · Cellulose · doi:10.1007/s10570-014-0197-3 · Cited by 77
Carbon Nanotube/Chitosan-Based Elastic Carbon Aerogel for Pressure Sensing
Luo, Q., Zheng, H., Hu, Y., Zhuo, H., Chen, Z., Peng, X., & Zhong, L. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02847 · Cited by 71
Conducting gels: A chronicle of technological advances
Chakraborty, P., Das, S., & Nandi, A. K. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.08.004 · Cited by 73
Wang, B., Yin, X., Cheng, R., Li, J., Ying, G., & Chen, K. (2022) · Carbon · doi:10.1016/j.carbon.2022.08.006 · Cited by 70
Ma, P., Yao, S., Wang, Z., Qi, F., & Liu, X. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.123250 · Cited by 70
Dai, Z., Liu, L., Qi, X., Kuang, J., Wei, Y., Zhu, H., & Zhang, Z. (2016) · Scientific Reports · doi:10.1038/srep18930 · Cited by 72
Shrinkage and pore structure in preparation of carbon aerogels
Feng, J., Feng, J., & Zhang, C. (2011) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-011-2514-8 · Cited by 69
Development of aerogels in solid-phase extraction and microextraction
Sun, M. H., Li, C., Feng, J., Sun, H., Sun, M., Feng, Y., Ji, X., Han, S., & Feng, J. (2021) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2021.116497 · Cited by 71
Yu, C., Xie, B., Yao, X., Hu, N., Guo, J., Jiang, X., Smith, A. T., & Sun, L. (2023) · Matter · doi:10.1016/j.matt.2023.10.010 · Cited by 67
Perspectives of Nano‐Carbon Based Engineering Materials
Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400110 · Cited by 73
Sahoo, P. K., Aepuru, R., Panda, H. S., & Bahadur, D. (2015) · Scientific Reports · doi:10.1038/srep17726 · Cited by 69
Rostami, J., Gordeyeva, K. S., Benselfelt, T., Lahchaichi, E., Hall, S. A., Riazanova, A. V., Larsson, P. A., Çınar, G., & Wågberg, L. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.013 · Cited by 67
John, J. V., McCarthy, A. D., Wang, H., Luo, Z., Li, H., Wang, Z., Cheng, F., Zhang, Y. S., & Xie, J. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100238 · Cited by 66
Carbon aerogel based materials for secondary batteries
Sun, S., Yan, Q., Wu, M., & Zhao, X. (2021) · Sustainable materials and technologies · doi:10.1016/j.susmat.2021.e00342 · Cited by 79
Zhou, G., Kim, N., Chun, S., Lee, W., Um, M., Chou, T., Islam, M. F., Byun, J., & Oh, Y. (2018) · Carbon · doi:10.1016/j.carbon.2017.12.123 · Cited by 65
Highly Concentrated 3D Macrostructure of Individual Carbon Nanotubes in a Ceramic Environment
Estili, M., Kawasaki, A., & Sakka, Y. (2012) · Advanced Materials · doi:10.1002/adma.201201134 · Cited by 64
Chen, W., Zhang, Q., Uetani, K., Li, Q., Lü, P., Cao, J., Wang, Q., Li, P., Li, J., Quan, Z., et al. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600004 · Cited by 64
Self-citationOrganic electrolytes for graphene-based supercapacitor: Liquid, gel or solid
Kovalska, E. O., & Kocabaş, C. (2016) · Materials Today Communications · doi:10.1016/j.mtcomm.2016.04.013 · Cited by 64
Preparation and structural evolution of SiOC preceramic aerogel during high-temperature treatment
Du, B., Hong, C., Wang, A., Zhou, S., Qu, Q., Zhou, S., & Zhang, X. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.212 · Cited by 64
Fabrication strategies of polymer-based electromagnetic interference shielding materials
Liu, C., Wang, L., Liu, S., Tong, L., & Liu, X. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.10.002 · Cited by 74
Niu, Y., Qian, X., Zhang, J., Wu, W., Liu, H., Xu, C., & Hou, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03591a · Cited by 63
Dong, L., Yang, Q., Xu, C., Li, Y., Yang, D., Hou, F., Yin, H., & Kang, F. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.004 · Cited by 63
Zhao, S., Gao, Y., Zhang, G., Deng, L., Li, J., Sun, R., & Wong, C. (2015) · Carbon · doi:10.1016/j.carbon.2015.01.033 · Cited by 63
Graphene oxide reinforced high surface area silica aerogels
Dervin, S., Lang, Y., Perova, T. S., Hinder, S. H., & Pillai, S. C. (2017) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2017.03.030 · Cited by 63
Prasad, C., Jeong, S., Won, J. S., Ramanjaneyulu, S., Sangaraju, S., Kerru, N., & Choi, H. Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129460 · Cited by 67
Metadata
- Authors
- Zou, J., Liu, J., Karakoti, A. S., Kumar, A., Joung, D., Li, Q., Khondaker, S. I., Seal, S., & Zhai, L.
- Affiliations
- NanoScience Technology Center
- Advanced Materials Processing and Analysis Center
- Department of Physics
- Corresponding author
- Zhai, Lei
- ORCID
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-11-22
- Volume
- 4
- Issue
- 12
- Pages
- 7293-7302
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2314021766
- Cited by
- 509
- References
- 62
- Citations by year
- 2026: 12 · 2025: 10 · 2024: 21 · 2023: 16 · 2022: 24 · 2021: 41 · 2020: 39 · 2019: 36 · 2018: 56 · 2017: 50 · 2016: 58 · 2015: 45 · 2014: 38 · 2013: 33 · 2012: 22
- FWCI
- 9.90
- Type
- journal article
- Language
- en
- Open access
- Locations
- ACS Nano (publishedVersion)
- PubMed (publishedVersion)
- Journal of International Crisis and Risk Communication Research (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Carbon Nanotubes in Composites
- Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Electromagnetic wave absorption materials
- Keywords
- multi-walled carbon nanotubes, carbon nanotube aerogels, ultralight materials, percolation network, silane functionalization, hierarchical porosity, surface area enhancement, electrical conductivity, pressure sensing, chemical vapor sensing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.