The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
High-Power and High-Energy-Density Flexible Pseudocapacitor Electrodes Made from Porous CuO Nanobelts and Single-Walled Carbon Nanotubes
Abstract
We report a simple wet-chemical process to prepare porous CuO nanobelts (NBs) with high surface area and small crystal grains. These CuO NBs were mixed with carbon nanotubes in an appropriate ratio to fabricate pseudocapacitor electrodes with stable cycling performances, which showed a series of high energy densities at different power densities, for example, 130.2, 92, 44, 25, and 20.8 W h kg(-1) at power densities of 1.25, 6.25, 25, and 50 k Wh kg(-1), respectively. CuO-on-single-walled carbon nanotube (SWCNT) flexible hybrid electrodes were also fabricated using the SWCNT films as current collectors. These flexible electrodes showed much higher specific capacitance than that of electrodes made of pure SWCNTs and exhibited more stable cycling performance, for example, effective specific capacitances of >62 F g(-1) for the hybrid electrodes after 1000 cycles in 1 M LiPF6/EC:DEC at a current density of 5 A g(-1) and specific capacitance of only 23.6 F g(-1) for pure SWCNT electrodes under the same testing condition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors
Brezesinski, T., Wang, J., Tolbert, S. H., & Dunn, B. (2010) · Nature Materials · doi:10.1038/nmat2612 · Cited by 3,359
Wang, D., Li, F., Liu, M., Lu, G. Q., & Cheng, H. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702721 · Cited by 1,999
Mn3O4−Graphene Hybrid as a High-Capacity Anode Material for Lithium Ion Batteries
Wang, H., Cui, L.-F., Yang, Y., Sanchez Casalongue, H., Robinson, J. T., Liang, Y., Cui, Y., & Dai, H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja105296a · Cited by 1,948
Hu, C.-C., Chang, K.-H., Lin, M.-C., & Wu, Y.-T. (2006) · Nano Letters · doi:10.1021/nl061576a · Cited by 1,734
Printable Thin Film Supercapacitors Using Single-Walled Carbon Nanotubes
Kaempgen, M., Chan, C. K., Ma, J., Cui, Y., & Gruner, G. (2009) · Nano Letters · doi:10.1021/nl8038579 · Cited by 1,533
Hydrothermal Synthesis and Pseudocapacitance Properties of MnO2 Nanostructures
Subramanian, V., Zhu, H., Vajtai, R., Ajayan, P. M., & Wei, B. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0543330 · Cited by 975
Hou, Y., Cheng, Y., Hobson, T., & Liu, J. (2010) · Nano Letters · doi:10.1021/nl101723g · Cited by 934
Yuan, C., Zhang, X., Su, L., Gao, B., & Shen, L. (2009) · Journal of Materials Chemistry · doi:10.1039/b902221j · Cited by 871
Self-citationCarbon Nanotube/Manganese Oxide Ultrathin Film Electrodes for Electrochemical Capacitors
Lee, S. W., Kim, J., Chen, S., Hammond, P. T., & Shao-Horn, Y. (2010) · ACS Nano · doi:10.1021/nn100681d · Cited by 728
Cited by
3D carbon based nanostructures for advanced supercapacitors
Jiang, H., Lee, P. S., & Li, C. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23284g · Cited by 1,511
Kumar, S., Saeed, G., Zhu, L., Hui, K. N., Kim, N. H., & Lee, J. H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126352 · Cited by 1,152
Lu, X.-F., Wu, D.-J., Li, R.-Z., Li, Q., Ye, S.-H., Tong, Y.-X., & Li, G.-R. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14930g · Cited by 534
Flexible electronics based on inorganic nanowires
Liu, Z., Xu, J., Chen, D., & Shen, G. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00116h · Cited by 512
Metal oxides based electrochemical pH sensors: Current progress and future perspectives
Manjakkal, L., Szwagierczak, D., & Dahiya, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100635 · Cited by 481
Salunkhe, R. R., Lin, J., Malgras, V., Dou, S. X., Kim, J. H., & Yamauchi, Y. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.09.030 · Cited by 472
Pendashteh, A., Mousavi, M. F., & Rahmanifar, M. S. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2012.10.088 · Cited by 411
Solution synthesis of metal oxides for electrochemical energy storage applications
Xia, X., Zhang, Y., Chao, D., Guan, C., Zhang, Y., Li, L., Ge, X., Bacho, I. M., Tu, J., & Fan, H. J. (2014) · Nanoscale · doi:10.1039/c4nr00024b · Cited by 410
Shao, M., Ning, F., Zhao, Y., Zhao, J., Wei, M., Evans, D. G., & Duan, X. (2012) · Chemistry of Materials · doi:10.1021/cm203831p · Cited by 384
Saraf, M., Rajak, R., & Mobin, S. M. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06470a · Cited by 373
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Li3V2(PO4)3 cathode materials for lithium-ion batteries: A review
Rui, X., Yan, Q., Skyllas-Kazacos, M., & Lim, T. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.126 · Cited by 342
Self-citationYao, F., Pham, D. T., & Lee, Y. H. (2015) · ChemSusChem · doi:10.1002/cssc.201403490 · Cited by 312
An overview of carbon materials for flexible electrochemical capacitors
He, Y., Chen, W., Gao, C., Zhou, J., Li, X., & Xie, E. (2013) · Nanoscale · doi:10.1039/c3nr02157b · Cited by 307
Metal–organic framework derived hollow materials for electrochemical energy storage
Xie, X.-C., Huang, K.-J., & Wu, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00612a · Cited by 284
Ultrathin V2O5nanosheet cathodes: realizing ultrafast reversible lithium storage
Rui, X., Lu, Z., Yu, H., Yang, D., Hng, H. H., Lim, T. M., & Yan, Q. (2013) · Nanoscale · doi:10.1039/c2nr33422d · Cited by 261
Self-citationZhao, J., Chen, J., Xu, S., Shao, M., Yan, D., Wei, M., Evans, D. G., & Duan, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11452j · Cited by 260
Flexible CoAl LDH@PEDOT Core/Shell Nanoplatelet Array for High‐Performance Energy Storage
Han, J., Dou, Y., Zhao, J., Wei, M., Evans, D. G., & Duan, X. (2013) · Small · doi:10.1002/smll.201201336 · Cited by 253
Metadata
- Authors
- Zhang, X., Shi, W., Zhu, J., Kharistal, D. J., Zhao, W., Lalia, B. S., Hng, H. H., & Yan, Q.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-18
- Volume
- 5
- Issue
- 3
- Pages
- 2013-2019
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2019622414
- Cited by
- 362
- References
- 26
- FWCI
- 13.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.