The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Neutral Color Semitransparent Microstructured Perovskite Solar Cells
Abstract
Neutral-colored semitransparent solar cells are commercially desired to integrate solar cells into the windows and cladding of buildings and automotive applications. Here, we report the use of morphological control of perovskite thin films to form semitransparent planar heterojunction solar cells with neutral color and comparatively high efficiencies. We take advantage of spontaneous dewetting to create microstructured arrays of perovskite "islands", on a length-scale small enough to appear continuous to the eye yet large enough to enable unattenuated transmission of light between the islands. The islands are thick enough to absorb most visible light, and the combination of completely absorbing and completely transparent regions results in neutral transmission of light. Using these films, we fabricate thin-film solar cells with respectable power conversion efficiencies. Remarkably, we find that such discontinuous films still have good rectification behavior and relatively high open-circuit voltages due to the inherent rectification between the n- and p-type charge collection layers. Furthermore, we demonstrate the ease of "color-tinting" such microstructured perovksite solar cells with no reduction in performance, by incorporation of a dye within the hole transport medium.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Self-citationStranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Self-citationSequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Self-citationNoh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2008) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,467
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Past achievements and future challenges in the development of optically transparent electrodes
Ellmer, K. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.282 · Cited by 2,090
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Self-citationLeijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Self-citationThe C.I.E. colorimetric standards and their use
Smith, T., & Guild, J. (1931) · Transactions of the Optical Society · doi:10.1088/1475-4878/33/3/301 · Cited by 1,025
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Organic solar cells with solution-processed graphene transparent electrodes
Wu, J., Becerril, H. A., Bao, Z., Liu, Z., Chen, Y., & Peumans, P. (2008) · Applied Physics Letters · doi:10.1063/1.2924771 · Cited by 917
Smooth Nanowire/Polymer Composite Transparent Electrodes
Gaynor, W., Burkhard, G. F., McGehee, M. D., & Peumans, P. (2011) · Advanced Materials · doi:10.1002/adma.201100566 · Cited by 571
Visibly Transparent Polymer Solar Cells Produced by Solution Processing
Chen, C.-C., Dou, L., Zhu, R., Chung, C.-H., Song, T.-B., Zheng, Y. B., Hawks, S., Li, G., Weiss, P. S., & Yang, Y. (2012) · ACS Nano · doi:10.1021/nn3029327 · Cited by 542
Estimating the Maximum Attainable Efficiency in Dye‐Sensitized Solar Cells
Snaith, H. J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901476 · Cited by 525
Self-citationOrganic Dye for Highly Efficient Solid‐State Dye‐Sensitized Solar Cells
Schmidt‐Mende, L., Bach, U., Humphry‐Baker, R., Horiuchi, T., Miura, H., Ito, S., Uchida, S., & Grätzel, M. (2005) · Advanced Materials · doi:10.1002/adma.200401410 · Cited by 513
Chen, K., Salinas, J., Yip, H., Huo, L., Hou, J., & Jen, A. K. ‐. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22623e · Cited by 361
Im, J.-H., Chung, J., Kim, S.-J., & Park, N.-G. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-353 · Cited by 261
Krantz, J., Stubhan, T., Richter, M., Spallek, S., Litzov, I., Matt, G. J., Spiecker, E., & Brabec, C. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202523 · Cited by 235
High-performance semi-transparent polymer solar cells possessing tandem structures
Chen, C.-C., Dou, L., Gao, J., Chang, W.-H., Li, G., & Yang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40860d · Cited by 183
Chueh, C., Chien, S., Yip, H., Salinas, J., Li, C., Chen, K., Chen, F., Chen, W., & Jen, A. K. ‐. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200679 · Cited by 154
Manufacturing method for transparent electric windows using dye-sensitized TiO2 solar cells
Kang, M. G., Park, N., Park, Y. J., Ryu, K. S., & Chang, S. H. (2003) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(02)00202-7 · Cited by 68
Yang, D., Meng, G., Zhang, S., et al. (2007) · Chemical Communications · doi:10.1039/b614147a · Cited by 47
Cited by
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Self-citationChen, Q., Zhou, H., Song, T.-B., Luo, S., Hong, Z., Duan, H.-S., Dou, L., Liu, Y., & Yang, Y. (2014) · Nano Letters · doi:10.1021/nl501838y · Cited by 1,543
Flexible and Semitransparent Organic Solar Cells
Li, Y., Xu, G., Cui, C., & Li, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701791 · Cited by 788
The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication
Eperon, G. E., Habisreutinger, S. N., Leijtens, T., Bruijnaers, B. J., van Franeker, J. J., deQuilettes, D. W., Pathak, S., Sutton, R. J., Grancini, G., Ginger, D. S., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b03626 · Cited by 574
Self-citationFlexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
Metadata
- Authors
- Eperon, G. E., Burlakov, V. M., Goriely, A., & Snaith, H. J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-10
- Volume
- 8
- Issue
- 1
- Pages
- 591-598
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2122420780
- Cited by
- 470
- References
- 28
- FWCI
- 29.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
