The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Mechanically Durable Carbon Nanotube−Composite Hierarchical Structures with Superhydrophobicity, Self-Cleaning, and Low-Drag
Abstract
Superhydrophobic surfaces with high contact angle and low contact angle hysteresis exhibit a self-cleaning effect and low drag for fluid flow. The lotus (Nelumbo nucifera) leaf is one of the examples found in nature for superhydrophobic surfaces. For the development of superhydrophobic surfaces, which is important for various applications such as glass windows, solar panels, and microchannels, materials and fabrication methods need to be explored to provide mechanically durable surfaces. It is necessary to perform durability studies on these surfaces. Carbon nanotube (CNT), composite structures which would lead to superhydrophobicity, self-cleaning, and low-drag, were prepared using a spray method. As a benchmark, structured surfaces with lotus wax were also prepared to compare with the durability of CNT composite structures. To compare the durability of the various fabricated surfaces, waterfall/jet tests were conducted to determine the loss of superhydrophobicity by changing the flow time and pressure conditions. Wear and friction studies were also performed using an atomic force microscope (AFM) and a ball-on-flat tribometer. The changes in the morphology of the structured surfaces were examined by AFM and optical imaging. We find that superhydrophobic CNT composite structures showed good mechanical durability, superior to the structured surfaces with lotus wax, and may be suitable for real world applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes
Wong, E. W., Sheehan, P. E., & Lieber, C. M. (1997) · Science · doi:10.1126/science.277.5334.1971 · Cited by 4,810
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Qian, D., Dickey, E. C., Andrews, R., & Rantell, T. (2000) · Applied Physics Letters · doi:10.1063/1.126500 · Cited by 2,455
Fundamentals of Microfabrication
Madou, M. J. (2018) · CRC Press eBooks · doi:10.1201/9781482274004 · Cited by 2,020
(2001) · Topics in Applied Physics · doi:10.1007/3-540-39947-x · Cited by 1,748
Load transfer in carbon nanotube epoxy composites
Schadler, L. S., Giannaris, S. C., & Ajayan, P. M. (1998) · Applied Physics Letters · doi:10.1063/1.122911 · Cited by 1,657
Superhydrophobic Carbon Nanotube Forests
Lau, K. K. S., Bico, J., Teo, K. B. K., Chhowalla, M., Amaratunga, G. A. J., Milne, W. I., McKinley, G. H., & Gleason, K. K. (2003) · Nano Letters · doi:10.1021/nl034704t · Cited by 1,537
Multifunctional surface structures of plants: An inspiration for biomimetics
Koch, K., Bhushan, B., & Barthlott, W. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.07.003 · Cited by 934
Self-citationSU-8: a photoresist for high-aspect-ratio and 3D submicron lithography
Campo, A. D., & Greiner, C. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/6/r01 · Cited by 825
Cited by
Bhushan, B., & Jung, Y. C. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.003 · Cited by 1,989
Self-citationBioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Wang, S., Liu, K., Yao, X., & Jiang, L. (2015) · Chemical Reviews · doi:10.1021/cr400083y · Cited by 1,646
Mechanically Durable Superhydrophobic Surfaces
Verho, T., Bower, C., Andrew, P., Franssila, S., Ikkala, O., & Ras, R. H. A. (2011) · Advanced Materials · doi:10.1002/adma.201003129 · Cited by 1,110
Yan, Y. Y., Gao, N., & Barthlott, W. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.08.005 · Cited by 1,000
Nishimoto, S., & Bhushan, B. (2013) · RSC Adv. · doi:10.1039/c2ra21260a · Cited by 840
Self-citationRobust superhydrophobicity: mechanisms and strategies
Zhang, W., Wang, D., Sun, Z., Song, J., & Deng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00751j · Cited by 686
Recent advances in the potential applications of bioinspired superhydrophobic materials
Darmanin, T., & Guittard, F. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02071e · Cited by 555
Intumescent Flame-Retardant and Self-Healing Superhydrophobic Coatings on Cotton Fabric
Chen, S., Li, X., Li, Y., & Sun, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b00121 · Cited by 532
Bio-Inspired Self-Cleaning Surfaces
Liu, K., & Jiang, L. (2012) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070511-155046 · Cited by 515
Superhydrophobic Surfaces by Electrochemical Processes
Darmanin, T., de Givenchy, E. T., Amigoni, S., & Guittard, F. (2013) · Advanced Materials · doi:10.1002/adma.201204300 · Cited by 457
Yao, L., & He, J. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.12.003 · Cited by 435
Condensation heat transfer on superhydrophobic surfaces
Miljkovic, N., & Wang, E. N. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.103 · Cited by 410
Coatings super-repellent to ultralow surface tension liquids
Pan, S., Guo, R., Björnmalm, M., Richardson, J. J., Li, L., Peng, C., Bertleff-Zieschang, N., Xu, W., Jiang, J., & Caruso, F. (2018) · Nature Materials · doi:10.1038/s41563-018-0178-2 · Cited by 402
Sun, Y., & Guo, Z. (2019) · Nanoscale Horizons · doi:10.1039/c8nh00223a · Cited by 302
Self-assembly of nanostructures towards transparent, superhydrophobic surfaces
Rahmawan, Y., Xu, L., & Yang, S. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00288d · Cited by 299
Huang, X., Tepylo, N., Pommier-Budinger, V., Budinger, M., Bonaccurso, E., Villedieu, P., & Bennani, L. (2019) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2019.01.002 · Cited by 262
Bioadhesion in the oral cavity and approaches for biofilm management by surface modifications
Sterzenbach, T., Helbig, R., Hannig, C., & Hannig, M. (2020) · Clinical Oral Investigations · doi:10.1007/s00784-020-03646-1 · Cited by 212
Metadata
- Authors
- Jung, Y. C., & Bhushan, B.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-30
- Volume
- 3
- Issue
- 12
- Pages
- 4155-4163
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W1980311788
- Cited by
- 401
- References
- 29
- FWCI
- 6.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.