The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Mechanically Durable Carbon Nanotube−Composite Hierarchical Structures with Superhydrophobicity, Self-Cleaning, and Low-Drag
Abstract
Superhydrophobic surfaces with high contact angle and low contact angle hysteresis exhibit a self-cleaning effect and low drag for fluid flow. The lotus (Nelumbo nucifera) leaf is one of the examples found in nature for superhydrophobic surfaces. For the development of superhydrophobic surfaces, which is important for various applications such as glass windows, solar panels, and microchannels, materials and fabrication methods need to be explored to provide mechanically durable surfaces. It is necessary to perform durability studies on these surfaces. Carbon nanotube (CNT), composite structures which would lead to superhydrophobicity, self-cleaning, and low-drag, were prepared using a spray method. As a benchmark, structured surfaces with lotus wax were also prepared to compare with the durability of CNT composite structures. To compare the durability of the various fabricated surfaces, waterfall/jet tests were conducted to determine the loss of superhydrophobicity by changing the flow time and pressure conditions. Wear and friction studies were also performed using an atomic force microscope (AFM) and a ball-on-flat tribometer. The changes in the morphology of the structured surfaces were examined by AFM and optical imaging. We find that superhydrophobic CNT composite structures showed good mechanical durability, superior to the structured surfaces with lotus wax, and may be suitable for real world applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes
Wong, E. W., Sheehan, P. E., & Lieber, C. M. (1997) · Science · doi:10.1126/science.277.5334.1971 · Cited by 4,810
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Qian, D., Dickey, E. C., Andrews, R., & Rantell, T. (2000) · Applied Physics Letters · doi:10.1063/1.126500 · Cited by 2,455
Fundamentals of Microfabrication
Madou, M. J. (2018) · CRC Press eBooks · doi:10.1201/9781482274004 · Cited by 2,020
(2001) · Topics in Applied Physics · doi:10.1007/3-540-39947-x · Cited by 1,748
Load transfer in carbon nanotube epoxy composites
Schadler, L. S., Giannaris, S. C., & Ajayan, P. M. (1998) · Applied Physics Letters · doi:10.1063/1.122911 · Cited by 1,657
Superhydrophobic Carbon Nanotube Forests
Lau, K. K. S., Bico, J., Teo, K. B. K., Chhowalla, M., Amaratunga, G. A. J., Milne, W. I., McKinley, G. H., & Gleason, K. K. (2003) · Nano Letters · doi:10.1021/nl034704t · Cited by 1,537
Multifunctional surface structures of plants: An inspiration for biomimetics
Koch, K., Bhushan, B., & Barthlott, W. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.07.003 · Cited by 934
Self-citationSU-8: a photoresist for high-aspect-ratio and 3D submicron lithography
Campo, A. D., & Greiner, C. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/6/r01 · Cited by 825
Mimicking the Lotus Effect: Influence of Double Roughness Structures and Slender Pillars
Patankar, N. A. (2004) · Langmuir · doi:10.1021/la048629t · Cited by 823
Micro-, nano- and hierarchical structures for superhydrophobicity, self-cleaning and low adhesion
Bhushan, B., Jung, Y. C., & Koch, K. (2009) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2009.0014 · Cited by 806
Self-citationCarbon Nanotubes: Science and Applications
Meyyappan, M. (2007) · Medical Entomology and Zoology · Cited by 803
Diversity of structure, morphology and wetting of plant surfaces
Koch, K., Bhushan, B., & Barthlott, W. (2008) · Soft Matter · doi:10.1039/b804854a · Cited by 730
Self-citationKoch, K., Bhushan, B., Jung, Y. C., & Barthlott, W. (2009) · Soft Matter · doi:10.1039/b818940d · Cited by 718
Self-citationArtificial Lotus Leaf by Nanocasting
Sun, M., Luo, C., Xu, L., Ji, H., Ouyang, Q., Yu, D., & Chen, Y. (2005) · Langmuir · doi:10.1021/la050316q · Cited by 687
Superhydrophobic Films from Raspberry-like Particles
Ming, W., Wu, D., van Benthem, R., & de With, G. (2005) · Nano Letters · doi:10.1021/nl0517363 · Cited by 614
Springer Handbook of Nanotechnology
(2007) · Springer eBooks · doi:10.1007/978-3-540-29857-1 · Cited by 592
Handbook of tribology: materials, coatings, and surface treatments
(1992) · Choice Reviews Online · doi:10.5860/choice.29-3326 · Cited by 531
Dual‐Scale Roughness Produces Unusually Water‐Repellent Surfaces
Shirtcliffe, N. J., McHale, G., Newton, M. I., Chabrol, G., & Perry, C. C. (2004) · Advanced Materials · doi:10.1002/adma.200400315 · Cited by 519
Introduction to Tribology 36/3
Adams, M. J. (2003) · Tribology International · doi:10.1016/s0301-679x(02)00183-4 · Cited by 436
Dropwise condensation on superhydrophobic surfaces with two-tier roughness
Chen, C.-H., Cai, Q., Tsai, C., Chen, C.-L., Xiong, G., Yu, Y., & Ren, Z. (2007) · Applied Physics Letters · doi:10.1063/1.2731434 · Cited by 382
Stable Superhydrophobic Surface via Carbon Nanotubes Coated with a ZnO Thin Film
Huang, L., Lau, S. P., Yang, H. Y., Leong, E. S. P., Yu, S. F., & Prawer, S. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp046549s · Cited by 365
Bhushan, B., & Jung, Y. C. (2008) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/20/22/225010 · Cited by 344
Self-citationSynthetic gecko foot-hairs from multiwalled carbon nanotubes
Yurdumakan, B., Raravikar, N. R., Ajayan, P. M., & Dhinojwala, A. (2005) · Chemical Communications · doi:10.1039/b506047h · Cited by 282
Zhu, L., Xiu, Y., Xu, J., Tamirisa, P. A., Hess, D. W., & Wong, C.-P. (2005) · Langmuir · doi:10.1021/la051410+ · Cited by 206
Microstereolithography and other Fabrication Techniques for 3D MEMS
Varadan, V. K., Jiang, X., & Varadan, V. V. (2001) · Medical Entomology and Zoology · Cited by 165
Zhao, Y., Li, M., Lu, Q., & Shi, Z. Y. (2008) · Langmuir · doi:10.1021/la8024364 · Cited by 131
Yang, J., Zhang, Z., Men, X., & Xu, X. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.07.010 · Cited by 78
Cited by
Bhushan, B., & Jung, Y. C. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.003 · Cited by 1,989
Self-citationBioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Wang, S., Liu, K., Yao, X., & Jiang, L. (2015) · Chemical Reviews · doi:10.1021/cr400083y · Cited by 1,646
Mechanically Durable Superhydrophobic Surfaces
Verho, T., Bower, C., Andrew, P., Franssila, S., Ikkala, O., & Ras, R. H. A. (2011) · Advanced Materials · doi:10.1002/adma.201003129 · Cited by 1,110
Yan, Y. Y., Gao, N., & Barthlott, W. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.08.005 · Cited by 1,000
Nishimoto, S., & Bhushan, B. (2013) · RSC Adv. · doi:10.1039/c2ra21260a · Cited by 840
Self-citation
Metadata
- Authors
- Jung, Y. C., & Bhushan, B.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-30
- Volume
- 3
- Issue
- 12
- Pages
- 4155-4163
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W1980311788
- Cited by
- 401
- References
- 29
- FWCI
- 6.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.