The Anisotropic Hooke's Law for Cancellous Bone and Wood
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
A method of data analysis for a set of elastic constant measurements is applied to data bases for wood and cancellous bone. For these materials the identification of the type of elastic symmetry is complicated by the variable composition of the material. The data analysis method permits the identification of the type of elastic symmetry to be accomplished independent of the examination of the variable composition. This method of analysis may be applied to any set of elastic constant measurements, but is illustrated here by application to hardwoods and softwoods, and to an extraordinary data base of cancellous bone elastic constants. The solid volume fraction or bulk density is the compositional variable for the elastic constants of these natural materials. The final results are the solid volume fraction dependent orthotropic Hooke's law for cancellous bone and a bulk density dependent one for hardwoods and softwoods.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [94]
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Voigt, W. (1966) · Vieweg+Teubner eBooks · doi:10.1007/978-3-663-15884-4 · Cited by 3,723 · cited 1×
“in the notation of Voigt [20].”
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
BoneJ: Free and extensible bone image analysis in ImageJ
Doube, M., Kłosowski, M. M., Arganda-Carreras, I., Cordelières, F. P., Dougherty, R. P., Jackson, J. S., Schmid, B., Hutchinson, J. R., & Shefelbine, S. J. (2010) · Bone · doi:10.1016/j.bone.2010.08.023 · Cited by 2,040
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
(2001) · CRC Press eBooks · doi:10.1201/b14263 · Cited by 1,451
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
On the dependence of the elasticity and strength of cancellous bone on apparent density
Rice, J. C., Cowin, S. C., & Bowman, J. A. (1988) · Journal of Biomechanics · doi:10.1016/0021-9290(88)90008-5 · Cited by 734 · cited 2×
“[14] (see also Cowin [2]) consisted generally of uniaxial compression tests of small cubes of cancellous bone in which only the Young’s modulus was reported.”
Mathematical relationships between bone density and mechanical properties: A literature review
Helgason, B., Perilli, E., Schileo, E., Taddei, F., Brynjólfsson, S., & Viceconti, M. (2008) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2007.08.024 · Cited by 589
Research works printed but not linked: 2
- S.C. Cowin, Bone Mechanics. CRC Press, Boca Raton, FL (1989).
- W.K. Thomson (Lord Kelvin), Elasticity, In: Encyclopaedia Britannica, Adam and Charles Black, Edinburgh (1878).
Cited by
Items 101–177 of 177
Quantification of trabecular spatial orientation from low-resolution images
Lenaerts, L., Wirth, A. J., & van Lenthe, H. (2014) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2014.908856 · Cited by 9
“Most macroscopic bone models described in the literature typically assume isotropic material properties (Keyak et al. 1990; Taddei et al. 2006), although it is known that cortical and trabecular bones exhibit orthotropic material behaviour (Rho 1996; Yang et al. 1998).”
BackgroundBahrami, M., Khonakdar, H., Moghaddam, A., Mahand, S. N., Bambizi, P. E., Kruppke, B., & Khonakdar, H. A. (2024) · Progress in Biophysics and Molecular Biology · doi:10.1016/j.pbiomolbio.2024.10.001 · Cited by 7
Yoon, Y. J. (2018) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2018.07.048 · Cited by 7
Weerasooriya, T., & Alexander, S. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104599 · Cited by 7
Pandithevan, P., Pandy, N. V. M., & Prasannavenkadesan, V. (2018) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519418500616 · Cited by 7
Xiao, P., Schilling, C., & Wang, X. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15080239 · Cited by 6
Borghese, V., Santoro, L., Santini, S., & Sesana, R. (2024) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-024-00969-8 · Cited by 6
“Timber is an orthotropic material, as defined [1] and it is uniquely characterized as “alive” due to continuous water exchanges with the surrounding environment.”
DEVELOPMENT OF IN-SITU TEMPERATURE PREDICTION MODELS FROM CADAVERIC HUMAN FEMUR FOR BONE DRILLING
Pandithevan, P., Pandy, N. V. M., & PALANIVEL, C. (2018) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519418500264 · Cited by 6
Shore, S. W., Unnikrishnan, G. U., Hussein, A. I., & Morgan, E. F. (2012) · CRC Press eBooks · doi:10.1201/b13733-3 · Cited by 8
Implantable Biomedical Devices and Biologically Inspired Materials
Bruck, H. A. (2008) · Springer handbooks · doi:10.1007/978-0-387-30877-7_32 · Cited by 8
Engineering Microstructures to Evaluate and Replace Trabecular Bone
Hollister, S. J., Zysset, P. K., Guldberg, R. E., Chu, T. G., & Halloran, J. W. (2001) · Advances in experimental medicine and biology · doi:10.1007/978-1-4615-0651-5_19 · Cited by 7
Bauer, J. K., Krauß, C., Blarr, J., Kinon, P. L., Kärger, L., & Böhlke, T. (2024) · Mathematics and Mechanics of Solids · doi:10.1177/10812865241241002 · Cited by 5
“…symmetry and a natural basis, i.e., an eigensystem, of given linear elastic stiffnesses, see Thomson [91], Mehrabadi and Cowin [92], Cowin and Mehrabadi [93], Rychlewski [97], Fedorov [102], Walpole [103], Rychlewski [104, 105], Yang et al. [106], Sutcliffe [107], and Browaeys and Chevrot [108].”
Modelling Living Tissues: Mechanical and Mechanobiological Aspects
Doblaré, M., & García‐Aznar, J. M. (2010) · Mathematics in industry · doi:10.1007/978-3-642-12110-4_1 · Cited by 5
Yassine, R. A., & Hamade, R. F. (2019) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-019-02019-5 · Cited by 5
Cardoso, L., & Schaffler, M. B. (2014) · Journal of Biomechanical Engineering · doi:10.1115/1.4029179 · Cited by 6
Pinheiro, M., Dobson, C. A., Clarke, N. M. P., & Fagan, M. J. (2018) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2018.1437151 · Cited by 5
Lian, Z., Gu, Y., & Zhang, H. (2008) · Multidiscipline Modeling in Materials and Structures · doi:10.1163/157361108785963019 · Cited by 4
Orthotropic modelling of the skeletal system
Geraldes, D. M. (2012) · Spiral (Imperial College London) · doi:10.25560/13813 · Cited by 4
Elastic Properties of Bone Tissue
Cowin, S. C. (2001) · Elsevier eBooks · doi:10.1016/b978-012443341-0/50106-x · Cited by 4
Comparative Study of Mechanical Stresses in Human Limb Bones
Drăgulescu, D., Rusu, L., Morcovescu, V., & Precup, C. V. (2004) · Applied Bionics and Biomechanics · doi:10.1155/2004/905627 · Cited by 4
Bettamer, A. (2013) · theses.fr (ABES) · doi:10.70675/7d04b4bfza5b5z44dfz8f0cz49556bee8989 · Cited by 6
ELASTIC PROPERTIES OF WOVEN BONE: EFFECT OF MINERAL CONTENT AND COLLAGEN FIBRILS ORIENTATION
García, J. M., Martínez‐Reina, J., & Domínguez, J. (2012) · Journal of Biomechanics · doi:10.1016/s0021-9290(12)70116-1 · Cited by 3
The effects of the spatial influence function on orthotropic femur remodelling
Shang, Y., Bai, J., & Peng, L. (2008) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/09544119jeim341 · Cited by 3
Watson, P. J., Fagan, M. J., & Dobson, C. A. (2020) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2020.1777546 · Cited by 3
Boyd, S. K., & Müller, R. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814841-9.00079-8 · Cited by 3
Colabella, L., Cisilino, A. P., Fachinotti, V. D., & Kowalczyk, P. (2023) · Computers & Structures · doi:10.1016/j.compstruc.2023.107084 · Cited by 3
Trabecular bone numerical homogenization with the use of buffer zone
Makowski, P., & Kuś, W. (2014) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.24423/cames.46 · Cited by 3
Distributed loads in an elastic solid with generalized thermodiffusion
Choudhary, S., & Deswal, S. (2008) · Archives of Mechanics · doi:10.24423/aom.261 · Cited by 3
Bettamer, A., & Hambli, R. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.04017-0 · Cited by 3
Mustansar, Z., Shaukat, A., & Margetts, L. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201710813002 · Cited by 3
“This method has the ability to give a spatial resolution of around 1 μm [37] to determine bone’s mechanical properties and to achieve bone’s nearly accurate young’s modulus in several directions because of the highly anisotropic [6, 38-44] nature of trabecular bone.”
MethodCowin, S. C. (2012) · Springer eBooks · doi:10.1007/978-1-4614-5025-2_9 · Cited by 3
Rieger, R. (2011) · theses.fr (ABES) · doi:10.70675/ad781ab0z43b9z43a4zaf69z46aed5ebab0c · Cited by 8
Barkaoui, A. (2012) · theses.fr (ABES) · doi:10.70675/03625c86z58daz485dz9b5dzf1da050608ab · Cited by 7
A review of macro-damage models used in finite element modelling of bone fracture
Mohammadi, H., Eichwalder, J., Ghaffari, D., Ferreira, L. M., & Knowles, N. K. (2026) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/1361-651x/ae65b2 · Cited by 2
Unusual elastic behaviour of a wood-like material during bending, milling and nanoindentation
Naimi‐Jamal, M. R., & Kaupp, G. (2011) · Wood Material Science and Engineering · doi:10.1080/17480272.2011.558631 · Cited by 2
“In addition, data analysis for a set of elastic constant measurements for hardwood and softwood was applied to databases (Yang et al., 1999).”
MethodMultiscale simulation of bone regeneration in ti ssue engineering processes
Castellano, M. D. (2008) · Cited by 2
Pakuła, M., Kaczmarek, M., & Padilla, F. R. (2010) · Springer eBooks · doi:10.1007/978-94-007-0017-8_5 · Cited by 2
Zhao, S., Ji, W., Gao, W., Ma, H., Li, Z., Yuan, X., Cui, Z., Zhu, S., & Zhao, J. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c01766 · Cited by 1
ELASTIC RESPONSE OF CURVILINEARLY ANISOTROPIC NONUNIFORM SOLID OR HOLLOW DISK, CYLINDER AND SPHERE
Lubarda, V. A. (2012) · Cited by 1
Chabrand, P. R. (2018) · EMC - Aparato Locomotor · doi:10.1016/s1286-935x(18)92752-8 · Cited by 1
Cloud Computing—Effect of Evolutionary Algorithm on Load Balancing
Aslanzadeh, S., Chaczko, Z., & Chiu, C. (2015) · Studies in computational intelligence · doi:10.1007/978-3-319-15720-7_16 · Cited by 1
“1 for some elastic bodies, if the directions of the stress and the strain are the same, then the magnitude of the force will be proportional [11, 12].”
BackgroundA CAS Approach to Handle the Anisotropic Hooke’s Law for Cancellous Bone and Wood
Kumar, S. (2014) · Chinese journal of engineering · doi:10.1155/2014/487314 · Cited by 1
da Silva, A. M. H. (2009) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.82.2009.tde-29062010-112929 · Cited by 11
Biomechanics, Bone Quality and Strength
Huiskes, R., & Kaastad, T. S. (2000) · Springer eBooks · doi:10.1007/978-1-4471-3825-9_5 · Cited by 2
Self-citationCisilino, A. P., D'amico, D., Buroni, F. C., Commisso, P., Sammartino, M. R., & Capiel, C. (2008) · Americanae (AECID Library)
da Silva, A. M. H. (2014) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.82.2014.tde-30102014-160356 · Cited by 2
On the remodelling of anisotropic bone tissue
DiCarlo, A., Naïli, S., & Quiligotti, S. (2005) · University of Minnesota Digital Conservancy (University of Minnesota)
Modeling of the stress state of the thumb carpometacarpal joint
Anferov, G. M., Goryacheva, I. G., Lyubicheva, A. N., Солдатенков, И. А., Su, F., & Chang, C.-H. (2013) · Mechanics of Solids · doi:10.3103/s0025654413040122
“This quantity weakly varies within an individual bone, and hence (according to [5]) it is necessary to take its average value over a chosen bone.”
BackgroundMulti-scale imaging and modelling of bone
Chen, B. (2013) · UCL Discovery (University College London)
ULTRASONIC WAVE IS DETERMINED BY FABRIC TENSOR: AN APPLICATION TO CALCANEUS
Yoon, Y. J. (2015) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519415400308
Yoo, S. H., Kim, W.-S., Moon, J. H., & Lee, S. S. (2004) · Key engineering materials · doi:10.4028/www.scientific.net/kem.270-273.2079
SCREW-BONE INTERFACE MODELLING IN LOCKING PLATE FE MODELS
MacLeod, A. R., Pankaj, P., & Simpson, H. (2012) · Journal of Biomechanics · doi:10.1016/s0021-9290(12)70334-2
The Fabric Anisotropy Effect on Elastic and Yield behavior of the Human Calcaneus Trabecular Bone
Souzanchi, M. F., Palacio-Mancheno, P., Cardoso, L., & Cowin, S. C. (2013) · Fifth Biot Conference on Poromechanics · doi:10.1061/9780784412992.146
Bioimaging and biomechanics of bone competence and implant stability
Mueller, T. L. (2010) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-006037549 · Cited by 1
Sharabi, M., Wilke, H., & Haj-Ali, R. M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812851-0.00005-7
Analysis of metallic foams with meshless methods: a homogenisation technique
Pérez, D. G. D. C. (2018) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/p568-x361
Mechanics of Biosolids and Computational Analysis
Tanaka, M., Wada, S., & Nakamura, M. (2012) · Springer eBooks · doi:10.1007/978-4-431-54073-1_2
Parameterized cellular material for the elastic mimetization of cancellous bone
Colabella, L., Cisilino, A. P., Haïat, G., & Kowalczyk, P. (2017) · El Servicio de Difusión de la Creación Intelectual (National University of La Plata)
Flexural Vibration Of Piezo Electric Solid Cylinder Of Class 6-Human Bone
Nehru, E. S. (2020) · i-manager’s Journal on Mathematics · doi:10.26634/jmat.8.3.17061
Hage, I. S., Hage, R.-M. S., Yassine, R. A., Seif, C. Y., & Hamade, R. F. (2021) · Journal of Bone and Mineral Metabolism · doi:10.1007/s00774-021-01217-2
“Starting from CT scans, various works related bone stiffness (isotropic [19]), transversely isotropic [20], and orthotropic [21] to HU values.”
Background(2007) · Springer eBooks · doi:10.1007/978-0-387-49985-7_11
Mohammadi, S. (2023) · Wiley eBooks · doi:10.1002/9781119033714.biblio
Relative motion of fluid flow in poroelasticity: Implication for cancellous bonePreprint
Yoon, Y. J. (2023) · Research Square · doi:10.21203/rs.3.rs-3241684/v1
Constitutive models of bone: The human femur
Branni, M. G. (2023) · Queensland University of Technology · doi:10.5204/thesis.eprints.243151
Injury to the palmar supporting structures of the fetlock alters limb stiffness and fetlock angle
Hanousek, K., Fiske‐Jackson, A. R., O’Leary, L. F., & Smith, R. K. W. (2024) · Equine Veterinary Journal · doi:10.1111/evj.14409
“8,9,20,21 By applying Hooke's law, 22 we can deduce that in order to achieve a similar deflection (fetlock angle) with increased load, the limb stiffness must be higher in the fore-than hindlimbs to optimise spring-like properties.”
The zeta potential for cancellous bone is calculated by poroelasticity
Yoon, Y. J. (2025) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2025.104404
Orthotropic characterization of trabecular bone remodeling in human femur: A biomechanical study
Hazra, A., Chanda, S., & Chakraborty, D. (2025) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119251375787
“…tissue is broadly classified as anisotropic, biomechanical simulation of hard tissue deformation using an orthotropic material model is considerably more effective compared to isotropic ones 19,20 since isotropic models lack the ability to describe the directionality of trabecular architecture.”
Ge, P., Wong, P. K., Li, S., Zhang, S., Zhang, L., Wang, Q., Zhao, B., & Hu, Y. (2025) · Expert Systems with Applications · doi:10.1016/j.eswa.2025.130125
Formiga, J. K. S., Formiga, Í. P., Pereira, V. F., Bressane, A., & Tango, R. N. (2026) · Journal of Theoretical Biology · doi:10.1016/j.jtbi.2026.112527
Influence de l’hétérogénéité des propriétés mécaniques sur la résistance de l’os trabéculaire humain
Dépalle, B. (2011) · theses.fr (ABES) · doi:10.70675/bf4d472cz0dd4z4d20za7f2zd8806f663dd6 · Cited by 5
“D’un point de vue mécanique, on considère généralement l’os comme orthotrope [462, 446], voire, dans certain cas, comme isotrope transverse [312].”
Modélisation par éléments finis des effets des médicaments sur la résistance de l’os
Boughattas, M. H. (2017) · theses.fr (ABES) · doi:10.70675/09e4577cz66c7z4387zad11z70a4fe10661c
Modèles topologiques et mécaniques pour l’étude du comportement anisotrope de l’os trabéculaire
Rogalski, N. (2023) · theses.fr (ABES) · doi:10.70675/aac283e9z823fz44d1za581zd060f5ec8626 · Cited by 1
Eshelby-like tensor for human cancellous bone
Yoon, Y. J. (2026) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2026.104714
Density estimation of historical wooden elements through means of thermographic correlation approach
Santoro, L., Borghese, V., Santini, S., Sesana, R., Curà, F. M., & Corsaro, L. (2023) · PORTO@Iris
Sesana, Raffaella, R., Santoro, L., Borghese, V., & Santini, S. (2024) · PORTO@Iris
Beltramo, G., Naretto, M., & Volinia, M. (2023) · PORTO@Iris
Metadata
- Authors
- Yang, G., Kabel, J., Van Rietbergen, B., Odgaard, A., Huiskes, R., & Cown, S. C.
- Affiliations
- City College of New York (US)
- Aarhus University Hospital (DK)
- Radboud University Nijmegen (NL)
- Venue
- Journal of Elasticity
- Published
- 1998-11
- Volume
- 53
- Issue
- 2
- Pages
- 125-146
- ISSN
- 0374-3535 (ISSN-L)
- 1573-2681
- OpenAlex
- W3101779966
- Cited by
- 140
- References
- 50
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 5 · 2023: 4 · 2022: 2 · 2021: 4 · 2020: 5 · 2019: 4 · 2018: 9 · 2017: 5 · 2016: 3 · 2015: 5 · 2014: 9 · 2013: 4 · 2012: 8
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Journal of Elasticity (publishedVersion)
- TU/e Research Portal (publishedVersion)
- Radboud Repository (Radboud University) (submittedVersion)
- Funders
- National Cancer Institute (CMS-9401518)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Engineering › Mechanics of Materials › Elasticity and Wave Propagation
- Keywords
- elastic anisotropy, Hooke's law, trabecular bone, wood, elastic constants, elastic symmetry, orthotropic materials, solid volume fraction, bulk density, hardwood, softwood, natural materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.