The Anisotropic Hooke's Law for Cancellous Bone and Wood
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
A method of data analysis for a set of elastic constant measurements is applied to data bases for wood and cancellous bone. For these materials the identification of the type of elastic symmetry is complicated by the variable composition of the material. The data analysis method permits the identification of the type of elastic symmetry to be accomplished independent of the examination of the variable composition. This method of analysis may be applied to any set of elastic constant measurements, but is illustrated here by application to hardwoods and softwoods, and to an extraordinary data base of cancellous bone elastic constants. The solid volume fraction or bulk density is the compositional variable for the elastic constants of these natural materials. The final results are the solid volume fraction dependent orthotropic Hooke's law for cancellous bone and a bulk density dependent one for hardwoods and softwoods.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [94]
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Voigt, W. (1966) · Vieweg+Teubner eBooks · doi:10.1007/978-3-663-15884-4 · Cited by 3,723 · cited 1×
“in the notation of Voigt [20].”
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
BoneJ: Free and extensible bone image analysis in ImageJ
Doube, M., Kłosowski, M. M., Arganda-Carreras, I., Cordelières, F. P., Dougherty, R. P., Jackson, J. S., Schmid, B., Hutchinson, J. R., & Shefelbine, S. J. (2010) · Bone · doi:10.1016/j.bone.2010.08.023 · Cited by 2,040
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
(2001) · CRC Press eBooks · doi:10.1201/b14263 · Cited by 1,451
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
On the dependence of the elasticity and strength of cancellous bone on apparent density
Rice, J. C., Cowin, S. C., & Bowman, J. A. (1988) · Journal of Biomechanics · doi:10.1016/0021-9290(88)90008-5 · Cited by 734 · cited 2×
“[14] (see also Cowin [2]) consisted generally of uniaxial compression tests of small cubes of cancellous bone in which only the Young’s modulus was reported.”
Mathematical relationships between bone density and mechanical properties: A literature review
Helgason, B., Perilli, E., Schileo, E., Taddei, F., Brynjólfsson, S., & Viceconti, M. (2008) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2007.08.024 · Cited by 589
Research works printed but not linked: 2
- S.C. Cowin, Bone Mechanics. CRC Press, Boca Raton, FL (1989).
- W.K. Thomson (Lord Kelvin), Elasticity, In: Encyclopaedia Britannica, Adam and Charles Black, Edinburgh (1878).
Cited by
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
“, with only nine independent parameters [122].”
Trabecular bone modulus–density relationships depend on anatomic site
Morgan, E. F., Bayraktar, H. H., & Keaveny, T. M. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00071-x · Cited by 1,209
“8 Vertebra Proximal Tibia Greater Trochanter Femoral Neck Pooled Yang et al. (1999), Et = 25 GPa Yang et al.”
BackgroundBone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
“Using this technique, three studies performed on bone taken from multiple sites have found that the orthotropic coefficients of the stiffness matrix were more than two orders of magnitude larger than any remaining term (17, 32, 33), i.”
Mellal, A., Wiskott, H. W. A., Botsis, J., Scherrer, S. S., & Belser, U. C. (2004) · Clinical Oral Implants Research · doi:10.1111/j.1600-0501.2004.01000.x · Cited by 244
“The bone’s non-linear elasticity (Yang et al. 1998) and transverse isotropy should be included.”
BackgroundA review of morphology–elasticity relationships in human trabecular bone: theories and experiments
Zysset, P. K. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00128-3 · Cited by 223
Hierarchical microimaging of bone structure and function
Müller, R. (2009) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2009.107 · Cited by 168
“Image-guided assessment of competence Although the inclusion of ultrastructural bone properties has strongly improved the prediction of bone competence”
Yosibash, Z., Padan, R., Joskowicz, L., & Milgrom, C. (2006) · Journal of Biomechanical Engineering · doi:10.1115/1.2720906 · Cited by 144
“9 g/cm 3 (as used by [22,26]): ρapp[g/cm (3)] = 1.”
Roberts, M. D., Liang, Y., Sigal, I. A., Grimm, J. L., Reynaud, J. F., Bellezza, A. J., Burgoyne, C. F., & Downs, J. C. (2010) · Investigative Ophthalmology & Visual Science · doi:10.1167/iovs.09-4016 · Cited by 136
“By ordering and normalizing the eigenvalues as described, the effect was to make the i 1 direction—the predominant beam direction—correspond to the greatest stiffness and the two and three directions correspond to the lesser and least stiff directions, respectively.(39,42,43) Finally, the assumed Poisson’s ratio of 13…”
Lee, C. A., & Einhorn, T. A. (2001) · Elsevier eBooks · doi:10.1016/b978-012470862-4/50002-7 · Cited by 143
Elastic properties of nanocomposite structure of bone
Ji, B., & Gao, H. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.017 · Cited by 109
“These values also exhibit strong anisotropy [45,46].”
Pistoia, W., van Rietbergen, B., Laib, A., & Ruegsegger, P. (2000) · Journal of Biomechanical Engineering · doi:10.1115/1.1352734 · Cited by 111
Mueller, T. L., Stauber, M., Kohler, T., Eckstein, F., Müller, R., & van Lenthe, H. (2008) · Bone · doi:10.1016/j.bone.2008.10.045 · Cited by 110
“Although the inclusion of architectural parameters has strongly improved the prediction of strength for bone specimens [30], they only do so in a statistical sense.”
Trabecular bone adaptation with an orthotropic material model
Miller, Z., Fuchs, M. B., & Arcan, M. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00192-0 · Cited by 103
van Lenthe, H., Stauber, M., & Müller, R. (2006) · Bone · doi:10.1016/j.bone.2006.06.033 · Cited by 91
Hambli, R., Bettamer, A., & Allaoui, S. (2011) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2011.07.011 · Cited by 89
Learning hyperelastic anisotropy from data via a tensor basis neural network
Fuhg, J. N., Bouklas, N., & Jones, R. E. (2022) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2022.105022 · Cited by 72
“Fiber reinforced composites [2], both engineered [3, 4, 5] and biological [6, 7, 8, 9, 10, 11, 12], are another broad category of materials that exhibit strong anisotropies.”
BackgroundMicro-FE Analyses of Bone: State of the Art
van Rietbergen, B. (2001) · Advances in experimental medicine and biology · doi:10.1007/978-1-4615-0651-5_3 · Cited by 82
Concept and development of an orthotropic FE model of the proximal femur
Wirtz, D. C., Pandorf, T., Portheine, F., Radermacher, K., Schiffers, N., Prescher, A., Weichert, D., & Niethard, F. U. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(02)00309-3 · Cited by 74
“Since bony materials are not isotropic but rather anisotropic and orthotropic, respectively (Carter et al., 1989; Savvidis and Stabrey, 1996; Wirtz et al., 2000; Yang et al., 1999), it was the object of our study to develop an orthotropic finite-element (FE) ‘‘femur reference model’’ to simulate bone remodelling more…”
BackgroundAntonio, T. S., Ciaccia, M., Muller-Karger, C. M., & Casanova, E. (2011) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2011.10.008 · Cited by 64
Coordinate-free Characterization of the Symmetry Classes of Elasticity Tensors
Bóna, A., Bucataru, I., & Slawiński, M. A. (2007) · Journal of Elasticity · doi:10.1007/s10659-007-9099-z · Cited by 61
“[25].”
MacLeod, A. R., Simpson, H., & Pankaj, P. (2014) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2014.974580 · Cited by 59
“Table 1 provides values at the periosteum and the endosteumn (Donaldson et al. 2012b); the variation in orthotropic elastic properties through the thickness was evaluated using tensor interpolations (Yang et al. 1999) and is illustrated in Figure 2(b).”
MethodMoesen, M., Cardoso, L., & Cowin, S. C. (2012) · Mechanics of Materials · doi:10.1016/j.mechmat.2012.07.004 · Cited by 49
“These same data were analyzed by a different method in Yang et al. (1998).”
MethodFabric dependence of wave propagation in anisotropic porous media
Cowin, S. C., & Cardoso, L. (2010) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-010-0217-7 · Cited by 53
“The work of these authors, and Odgaard (1997a), Odgaard (2001), Odgaard et al. (1997b), Van Rietbergen et al. (1996), Van Rietbergen et al. (1998), Yang et al. (1999), Matsuura et al. (2008) and others, has shown that the fabric tensor is a good measure of the structural anisotropy in cancellous…”
Morgan, E. F., Barnes, G. B., & Einhorn, T. A. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-415853-5.00001-7 · Cited by 55
Kowalczyk, P. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00065-4 · Cited by 46
Ganghoffer, J. (2011) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2011.08.004 · Cited by 45
Mapping anisotropy of the proximal femur for enhanced image based finite element analysis
Enns-Bray, W. S., Owoc, J. S., Nishiyama, K. K., & Boyd, S. K. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.08.020 · Cited by 50
Techniques for Computing Fabric Tensors: A Review
Moreno, R., Borga, M., & Smedby, Ö. (2014) · Mathematics and visualization · doi:10.1007/978-3-642-54301-2_12 · Cited by 52
“Assuming orthotropic symmetry of trabecular bone [99] the number of independent can be further reduced to nine.”
An orientation distribution function for trabecular bone
Kinney, J. H., Stolken, J. S., Smith, T. S., Ryaby, J. T., & Lane, N. E. (2005) · Bone · doi:10.1016/j.bone.2004.09.023 · Cited by 47
Hazrati, J., Ito, K., & van Rietbergen, B. (2012) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2012.08.022 · Cited by 44
“Since this can be difficult or impossible to measure from clinical CT scans, it has been proposed as well to base the trabecular orientation on the anatomical site (Yang et al., 1998).”
BackgroundThe Bone Organ System: Form and Function
Morgan, E. F., Barnes, G. B., & Einhorn, T. A. (2010) · Elsevier eBooks · doi:10.1016/b978-0-12-375098-3.50004-4 · Cited by 44
van Lenthe, H., & Müller, R. (2006) · Drug Discovery Today Technologies · doi:10.1016/j.ddtec.2006.06.001 · Cited by 38
Enns-Bray, W. S., Ariza, O., Gilchrist, S. E., Widmer, R. P., Vogt, P. J., Pálsson, H., Boyd, S. K., Guy, P., Cripton, P. A., Ferguson, S. J., et al. (2016) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2016.08.010 · Cited by 38
Integrated remodeling-to-fracture finite element model of human proximal femur behavior
Hambli, R., Lespessailles, É., & Benhamou, C.-L. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.08.011 · Cited by 38
Empirical angle-dependent Biot and MBA models for acoustic anisotropy in cancellous bone
Lee, K. L., Hughes, E. R., Humphrey, V. F., Leighton, T. G., & Choi, M. J. (2006) · Physics in Medicine and Biology · doi:10.1088/0031-9155/52/1/005 · Cited by 37
“Recently, an interesting method of data analysis for a set of elastic constant measurements has been reported, dealing with variable composition anisotropic elastic materials, such as cancellous bone, hardwood and softwood, whose elastic coefficients depend upon the particular composition of the material (Cowin and Ya…”
MethodLenaerts, L., & van Lenthe, H. (2009) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2008.0302 · Cited by 41
“(ii) Isotropic or anisotropic properties It is generally known that bone material, cortical as well as cancellous, is orthotropic rather than isotropic (Yang et al. 1998).”
BackgroundWang, C., Fu, G., & Deng, F. (2015) · Journal of Dental Sciences · doi:10.1016/j.jds.2014.11.001 · Cited by 35
Tensile and compressive stress yield criteria for cancellous bone
Cowin, S. C., & He, Q. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.03.003 · Cited by 34
Donaldson, F. E., Pankaj, P., Cooper, D. M. L., Thomas, C. D. L., Clement, J. G., & Simpson, H. (2011) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/2041303310395675 · Cited by 35
Gupta, A. K., Bayraktar, H. H., Fox, J. C., Keaveny, T. M., & Papadopoulos, P. (2006) · Computational Mechanics · doi:10.1007/s00466-006-0082-5 · Cited by 32
“14 then assigned to each element using published relations between volume fraction and the elastic modulus in the principal material direction [35].”
MethodThe Bone Organ System: Form and Function
Morgan, E. F., Barnes, G. B., & Einhorn, T. A. (2008) · Elsevier eBooks · doi:10.1016/b978-012370544-0.50003-3 · Cited by 56
Wang, C., Feng, L., & Jasiuk, I. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.4000192 · Cited by 32
Inverse design of anisotropic microstructures using physics-augmented neural networks
Jadoon, A. A., Kalina, K. A., Rausch, M. K., Jones, R. E., & Fuhg, J. N. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106161 · Cited by 29
Prediction of apparent trabecular bone stiffness through fourth-order fabric tensors
Moreno, R., Smedby, Ö., & Pahr, D. H. (2015) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-015-0726-5 · Cited by 31
Mimetization of the elastic properties of cancellous bone via a parameterized cellular material
Colabella, L., Cisilino, A. P., Haïat, G., & Kowalczyk, P. (2017) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-017-0901-y · Cited by 29
Simulation of ultrasonic wave propagation in anisotropic cancellous bone immersed in fluid
Nguyen, V., Naïli, S., & Sansalone, V. (2009) · Wave Motion · doi:10.1016/j.wavemoti.2009.09.002 · Cited by 29
The bone organ system: form and function
Morgan, E. F., & Gerstenfeld, L. C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-813073-5.00002-2 · Cited by 38
van Lenthe, H., & Huiskes, R. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(02)00081-7 · Cited by 30
“This is also true for real trabecular bone (Yang et al., 1999).”
BackgroundSelf-citationA computational insight on damage-based constitutive modelling in femur mechanics
Gaziano, P., Falcinelli, C., & Vairo, G. (2022) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2022.104538 · Cited by 28
Design and assessment of the biomimetic capabilities of a Voronoi-based cancellous microstructure
Frayssinet, E., Colabella, L., & Cisilino, A. P. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105186 · Cited by 29
Yoon, Y. J., Yang, G., & Cowin, S. C. (2002) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/pl00023929 · Cited by 29
Self-citationA novel approach to estimate trabecular bone anisotropy from stress tensors
Hazrati, J., Ito, K., & van Rietbergen, B. (2014) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-014-0584-6 · Cited by 31
“The fact that elastic properties of cancellous bone are best described as orthotropic (Pahr and Zysset 2009; Yang et al. 1998) has been explained by the fact that its underlying micro-architecture is adapted to a second-rank continuum-level stress tensor (Odgaard et al.”
Ruffoni, D., & van Lenthe, H. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.09798-8 · Cited by 30
Arabmotlagh, M., Bachmaier, S., Geiger, F., & Rauschmann, M. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33140 · Cited by 26
Modelling external bone adaptation using evolutionary structural optimisation
Chen, G., Pettet, G. J., Pearcy, M. J., & McElwain, D. L. S. (2006) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-006-0055-9 · Cited by 26
“The constant which relates the density and Young’s modulus, C, is 100(MPa)/ g/cm 3 2 and the remodelling rate B = 1.0 g/cm 3 2 (MPa ·time unit) ( Xinghua et al. 2005 ).”
BackgroundMethodInfluentialLievers, W. B., Petryshyn, A. C., Poljsak, A. S., Waldman, S. D., & Pilkey, A. K. (2010) · Bone · doi:10.1016/j.bone.2010.03.024 · Cited by 26
“A power–law relationship has been shown to exist [22,23] between modulus and either BV/TV or ρapp, so ANCOVA was performed using log(E) as the dependent variable and either log (ρapp) or log(BV/TV) as the covariate.”
MethodTrabecular bone failure at the microstructural level
Müller, R., & van Lenthe, H. (2006) · Current Osteoporosis Reports · doi:10.1007/s11914-006-0007-4 · Cited by 31
“Although the inclusion of architectural parameters has strongly improved the prediction of strength for bone specimens [ 19 ], this occurs only in a statistical sense.”
BackgroundMultiscale design of elastic solids with biomimetic cancellous bone cellular microstructures
Colabella, L., Cisilino, A. P., Fachinotti, V. D., & Kowalczyk, P. (2019) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-019-02229-3 · Cited by 26
“Based on experimental observations, it is generally assumed that ℂ is orthotropic, so, in a three-dimension problem, it can be completely described in terms of nine independent elastic constants (Yang et al. 1998).”
BackgroundLievers, W. B., Lee, V., Arsenault, S. M., Waldman, S. D., & Pilkey, A. K. (2006) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.09.002 · Cited by 25
“Different amounts of shrinkage for these two measures would alter the tissue volume fraction, an important parameter for explaining the variation in apparent mechanical properties of cancellous bone (Yang et al., 1999).”
BackgroundA new multiscale micromechanical model of vertebral trabecular bones
Haj-Ali, R. M., Massarwa, E., Aboudi, J., Galbusera, F., Wolfram, U., & Wilke, H. (2016) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-016-0862-6 · Cited by 24
Simulated bone remodeling around tilted dental implants in the anterior maxilla
Wang, C., Zhang, W., Ajmera, D. H., Zhang, Y., Fan, Y., & Ji, P. (2015) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-015-0718-5 · Cited by 22
de Saxcé, G., & Vallée, C. (2012) · Journal of Elasticity · doi:10.1007/s10659-012-9392-3 · Cited by 21
“Other methods of accomplishing this objective has been proposed by Cowin and coworkers in [10, 11] and applied in [43].”
MethodSpace of SO (3)-orbits of elasticity tensors
Bóna, A., Bucataru, I., & Slawinski, M. A. (2008) · eSpace (Curtin University) · doi:10.24423/aom.260 · Cited by 21
“Examination of rotations in the context of the second viewpoint requires the study of second-order rotations of a subgroup of the orthogonal group O(6) in the space of elasticity tensors, which has been investigated by Rychlewski [20, 21], Cowin and Mehrabadi [17, 9], Helbig [13], Yang et al. [ 27 ], and B¶ona et al.…”
BackgroundSur le remodelage des tissus osseux anisotropes
DiCarlo, A., Naïli, S., & Quiligotti, S. (2006) · Comptes Rendus Mécanique · doi:10.1016/j.crme.2006.06.009 · Cited by 21
Lin, N. Y. C., Cheng, X., & Cohen, I. (2014) · Soft Matter · doi:10.1039/c3sm52880d · Cited by 21
Ellipsoidal anisotropy in linear elasticity: Approximation models and analytical solutions
Pouya, A. (2011) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2011.03.028 · Cited by 20
Elastic properties of woven bone: effect of mineral content and collagen fibrils orientation
García-Rodríguez, J., & Martínez‐Reina, J. (2016) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-016-0808-z · Cited by 20
“The above-mentioned symmetrization technique (Yang et al. 1998; Cowin et al. 1999; Yoon et al. 2002) allowed us to obtain an equivalent transversely isotropic material with a stiffness tensor CTI wb.”
MethodCan DXA image-based deep learning model predict the anisotropic elastic behavior of trabecular bone?
Xiao, P., Haque, E., Zhang, T., Dong, X., Huang, Y., & Wang, X. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104834 · Cited by 20
Quantification of Bone Structural Parameters and Mechanical Competence at the Distal Radius
van Lenthe, H., Mueller, T. L., Wirth, A. J., & Müller, R. (2008) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0b013e31815e9fe1 · Cited by 19
“architectural measures for structural anisotropy, the predictive power increases to more than 90%.(34) The inclusion of architectural parameters can enhance the prediction of mechanical bone competence for excised trabecular bone specimens and for whole bones.”
BackgroundThe Mechanical Properties of Bone
Fyhrie, D. P. (2010) · Elsevier eBooks · doi:10.1016/b978-0-12-374602-3.00005-5 · Cited by 21
CT-based visualization and quantification of bone microstructure in vivo
van Lenthe, H., & Müller, R. (2008) · IBMS BoneKEy · doi:10.1138/20080348 · Cited by 18
“Bone microstructure explains a significant part of the remaining variation; by including architectural parameters in the analysis the predictive power increases to over 90% for bone stiffness (5-7).”
BackgroundWinter, W., & Karl, M. (2014) · Biomedizinische Technik/Biomedical Engineering · doi:10.1515/bmt-2014-0039 · Cited by 17
Sarıkanat, M., & Yıldız, H. (2011) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119jeim895 · Cited by 17
Pinheiro, M., Dobson, C. A., Perry, D. C., & Fagan, M. J. (2018) · Bone and Joint Research · doi:10.1302/2046-3758.72.bjr-2017-0191.r1 · Cited by 17
A closed-form solution for in vitro transient ultrasonic wave propagation in cancellous bone
Nguyen, V., Naïli, S., & Sansalone, V. (2010) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2010.04.007 · Cited by 15
The speed of sound through trabecular bone predicted by Biot theory
Yoon, Y. J., Chung, J.-P., Bae, C. S., & Han, S.-Y. (2012) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2011.12.007 · Cited by 15
Karer, E., & Kraus, J. (2010) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2853 · Cited by 15
“Note that the experimental data, used in [24] to derive the model (see Table 4), was available only for φ ∈ (0.”
BackgroundMethodInfluentialBenalla, M., Cardoso, L., & Cowin, S. C. (2011) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-011-0350-y · Cited by 15
Calculation of cancellous bone elastic properties with the polarization‐based FFT iterative scheme
Colabella, L., Pino, A. A. I., Ballarre, J., Kowalczyk, P., & Cisilino, A. P. (2017) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2879 · Cited by 17
Zhang, Y., & Gao, Q. (2019) · Archive of Applied Mechanics · doi:10.1007/s00419-019-01601-5 · Cited by 14
Winter, W., Krafft, T., Steinmann, P., & Karl, M. (2010) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2010.12.014 · Cited by 14
“Note that equation (5) is an approximation for equation (7) with ݎܤܯܦ ൏ 0.35 . Same results are given in Fig. 3 (graph 1, 4, 6, 7) where the values for trabecular bone reported by Yang et al. [ 15 ] are used for comparison (graph 2 and 3).”
BackgroundInfluentialMultiscale design of artificial bones with biomimetic elastic microstructures
Colabella, L., Cisilino, A. P., Fachinotti, V. D., Capiel, C., & Kowalczyk, P. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103748 · Cited by 15
Orthotropic bone remodeling: case of plane stresses
Watzky, A., & Naïli, S. (2004) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2004.03.013 · Cited by 15
A femoral model with all relevant muscles and hip capsule ligaments
Helwig, P., Hindenlang, U., Hirschmüller, A., Konstantinidis, L., Südkamp, N. P., & Schneider, R. (2011) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2011.631918 · Cited by 13
“element (RVE) of the cancellous bone (Yang et al. 1998) as”
BackgroundILIC, S., Hackl, K., & Gilbert, R. P. (2011) · Journal of Theoretical and Computational Acoustics · doi:10.1142/s0218396x11004407 · Cited by 13
Silva-Henao, J. D., Rueda‐Esteban, R. J., Marañón, A., & Casas, J. P. (2020) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.107053 · Cited by 12
Nguyen, V., & Naïli, S. (2013) · Journal of Engineering Mathematics · doi:10.1007/s10665-013-9654-5 · Cited by 12
Effects of damage on the orthotropic material symmetry of bovine tibial trabecular bone
Liu, X., Wang, X., & Niebur, G. L. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00217-3 · Cited by 13
Experiments on the effective compliance in the radial–tangential plane of Norway spruce
Karakoç, A., Tukiainen, P., Freund, J., & Hughes, M. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.03.013 · Cited by 11
“The displacement and strain fields are computed by means of MatPIV v.1.6.1-computer code, which was written for particle image analysis and is run in Matlab environment [20].”
BackgroundMethodResultInfluentialHuang, X., Zheng, L., Zheng, D., Li, S., Fan, Y., Lin, Z., & Huang, S. (2023) · Frontiers in Endocrinology · doi:10.3389/fendo.2023.1061758 · Cited by 10
Buckling of adaptive elastic bone-plate: theoretical and numerical investigation
Ramtani, S., & Abdi, M. (2005) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-004-0056-5 · Cited by 10
Stricker, A., Widmer, D., Gueorguiev, B. G., Wahl, D., Varga, P., & Duttenhoefer, F. (2018) · BioMed Research International · doi:10.1155/2018/3579654 · Cited by 10
“This assumption was based on the fact that the often varying and inhomogeneous composition of materials leads to anisotropy and hence difficulties when calculating the elastic constant measurement [29].”
BackgroundBone Quality: The Mechanical Effects of Microarchitecture and Matrix Properties
Day, J. S. (2005) · EUR Research Repository (Erasmus University Rotterdam) · Cited by 15
Ray, S., Kar, S. K., Wanner, A., & Roy, S. (2025) · Transactions of the Indian Institute of Metals · doi:10.1007/s12666-025-03555-5 · Cited by 9
Mechanical anisotropy match of parameterized body-centered-cuboid scaffolds and trabecular bones
Chen, H., Xu, X., Pugno, N. M., Li, Z., & Chen, Q. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110423 · Cited by 9
Prediction of Elastic Behavior of Human Trabecular Bone Using A DXA Image-Based Deep Learning Model
Xiao, P., Zhang, T., Haque, E., Wahlen, T., Dong, X., Huang, Y., & Wang, X. (2021) · JOM · doi:10.1007/s11837-021-04704-z · Cited by 9
Ruffoni, D., & van Lenthe, H. (2011) · Elsevier eBooks · doi:10.1016/b978-0-08-055294-1.00093-3 · Cited by 10
Geraldes, D. M., & Phillips, A. (2010) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-642-14515-5_196 · Cited by 9
“This isotropic material assumption does not explain the directionality observed in bone’s internal trabecular structures [3,4], as well as the orthotropic properties that have been verified in other studies [5,6].”
Lenich, A., Bachmeier, S., Dendorfer, S., Mayr, E. J., Nerlich, M. L., & Füchtmeier, B. (2012) · Biomedizinische Technik/Biomedical Engineering · doi:10.1515/bmt-2011-0999 · Cited by 9
“The fatigue strength is highly anisotropic for cancellous bone [23] .”
Background
Metadata
- Authors
- Yang, G., Kabel, J., Van Rietbergen, B., Odgaard, A., Huiskes, R., & Cown, S. C.
- Affiliations
- City College of New York (US)
- Aarhus University Hospital (DK)
- Radboud University Nijmegen (NL)
- Venue
- Journal of Elasticity
- Published
- 1998-11
- Volume
- 53
- Issue
- 2
- Pages
- 125-146
- ISSN
- 0374-3535 (ISSN-L)
- 1573-2681
- OpenAlex
- W3101779966
- Cited by
- 140
- References
- 50
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 5 · 2023: 4 · 2022: 2 · 2021: 4 · 2020: 5 · 2019: 4 · 2018: 9 · 2017: 5 · 2016: 3 · 2015: 5 · 2014: 9 · 2013: 4 · 2012: 8
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Journal of Elasticity (publishedVersion)
- TU/e Research Portal (publishedVersion)
- Radboud Repository (Radboud University) (submittedVersion)
- Funders
- National Cancer Institute (CMS-9401518)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Engineering › Mechanics of Materials › Elasticity and Wave Propagation
- Keywords
- elastic anisotropy, Hooke's law, trabecular bone, wood, elastic constants, elastic symmetry, orthotropic materials, solid volume fraction, bulk density, hardwood, softwood, natural materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.