A review of ceramic sintering and suggestions on reducing sintering temperatures

Kuang, X.; Carotenuto, G.; Nicolais, L.

doi:10.1023/a:1008621020555

Cited by 148Advanced ceramic materials synthesisMicrowave Dielectric Ceramics SynthesisElectrical and Thermal Properties of Materials

A review of ceramic sintering and suggestions on reducing sintering temperatures

Kuang, X., Carotenuto, G., Nicolais, L.·1997·Advanced Performance Materials

DOI 10.1023/a:1008621020555

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1023/a:1008621020555

Cites

59 of 59 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

For ceramics and ceramic matrix composites (CMCs), heat treatment can involve annealing and stress relief, as well as different types of firing and sintering, such as spark plasma sintering (SPS) and Sinter-HIP.
“For ceramics and ceramic matrix composites (CMCs), it can involve annealing and stress relief, as well as different types of firing and sintering, such as spark plasma sintering (SPS) and Sinter-HIP (simultaneous sintering and HIP) [385,386].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [385]

Preparation of monodispersed colloidal particles
Sugimoto, T. (1987) · Advances in Colloid and Interface Science · doi:10.1016/0001-8686(87)80009-x · Cited by 934 · see citing works
Preparation and properties of uniform size colloids
Matijević, E. (1993) · Chemistry of Materials · doi:10.1021/cm00028a004 · Cited by 678 · see citing works
Sintering and Related Phenomena
Kuczynski, G. C. (1973) · Springer eBooks · doi:10.1007/978-1-4615-8999-0 · Cited by 676 · see citing works
Encyclopedia of Chemical Processing and Design
McKetta, J. J., & Cunningham, W. A. (2021) · CRC Press eBooks · doi:10.1201/9781003209799 · Cited by 564 · see citing works
Soft ferrites: properties and applications
Snelling, E. C. (1969) · CERN Document Server (European Organization for Nuclear Research) · Cited by 415 · see citing works
Synthesis, characterization, and properties of nanophase TiO2
Siegel, R. W., Ramasamy, S., Hahn, H., Li, Z., Ting, L., & Gronsky, R. (1988) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1988.1367 · Cited by 396 · see citing works
Preparation and properties of solid state materials
Pamplin, B. R. (1979) · Progress in Crystal Growth and Characterization · doi:10.1016/0146-3535(81)90035-6 · Cited by 372 · see citing works
Modern Ceramic Engineering: Properties, Processing, and Use in Design, Fourth Edition
Richerson, D. W. (2018) · Medical Entomology and Zoology · Cited by 353 · see citing works
Sintering characteristics of nanocrystalline TiO2
Hahn, H., Logas, J., & Averback, R. S. (1990) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1990.0609 · Cited by 337 · see citing works
Superfine Particle Technology
Ichinose, N., Ozaki, Y., & Kashū, S. (1992) · Springer eBooks · doi:10.1007/978-1-4471-1808-4 · Cited by 274 · see citing works
Hydrothermal synthesis of advanced ceramic powders
Dawson, W. J. (1988) · American Ceramic Society bulletin · Cited by 243 · see citing works
Study of the Sintering of Glass
Kuczynski, G. C. (1949) · Journal of Applied Physics · doi:10.1063/1.1698291 · Cited by 230 · see citing works
Ceramic materials for electronics: Processing, properties, and applications
Buchanan, R. C. (1986) · CERN Document Server (European Organization for Nuclear Research) · Cited by 229 · see citing works
Synthesis and properties of nanophase materials
Siegel, R. W. (1993) · Materials Science and Engineering A · doi:10.1016/0921-5093(93)90726-u · Cited by 202 · see citing works
Hydrothermal Preparation of Ultrafine Ferrites and Their Sintering
Komarneni, S., Fregeau, E., BREVAL, E., & Roy, R. (1988) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1988.tb05773.x · Cited by 171 · see citing works
Effect of Heating Rate on Sintering and Coarsening
Chu, M., Rahaman, M. N., Jonghe, L. C. D., & Brook, R. J. (1991) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1991.tb04090.x · Cited by 163 · see citing works
Crushing and Grinding
Gross, J. (1938) · Cited by 153 · see citing works
Minerals and surfaces
Kitchener, J. A. (1992) · Developments in mineral processing · doi:10.1016/b978-0-444-88284-4.50006-8 · Cited by 150 · see citing works
Computer Simulation of Final‐Stage Sintering: I, Model Kinetics, and Microstructure
Hassold, G. N., Chen, I., & Srolovitz, D. J. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06686.x · Cited by 139 · see citing works
Hydrothermal Synthesis of Manganese Zinc Ferrites
Rožman, M., & Drofenik, M. (1995) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1995.tb08684.x · Cited by 134 · see citing works
Impedance spectroscopy of grain boundaries in nanophase ZnO
Lee, J., Hwang, J., Mashek, J. J., Mason, T. O., Miller, A. E., & Siegel, R. W. (1995) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1995.2295 · Cited by 134 · see citing works
The magnetic and structural properties of pulsed laser deposited epitaxial MnZn–ferrite films
Williams, C. M., Chrisey, D. B., Lubitz, P., Grabowski, K. S., & Cotell, C. M. (1994) · Journal of Applied Physics · doi:10.1063/1.356353 · Cited by 125 · see citing works
Measurement of Self-Diffusion of Silver without Radioactive Tracers
Kuczynski, G. C. (1950) · Journal of Applied Physics · doi:10.1063/1.1699722 · Cited by 117 · see citing works
Physico-chemical aspects of grinding: a review of use of additives
El‐Shall, H., & Somasundaran, P. (1984) · Powder Technology · doi:10.1016/0032-5910(84)85009-3 · Cited by 115 · see citing works
Low temperature fired NiCuZn ferrite
Hsu, J.-Y., Ko, W.-S., Shen, H.-D., & Chen, C.-J. (1994) · IEEE Transactions on Magnetics · doi:10.1109/20.334251 · Cited by 88 · see citing works
Retention of nanostructure in aluminum oxide by very rapid sintering at 1150 °C
Risbud, S. H., Shan, C.-H., Mukherjee, A. K., Kim, M. J., Bow, J. S., & Holl, R. A. (1995) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1995.0237 · Cited by 88 · see citing works
Oxide ceramics : physical chemistry and technology
Ryshkewitch, E. (1960) · Academic Press eBooks · Cited by 86 · see citing works
Preparation, characterization, and sinterability of well-defined silica/yttria powders
Giesche, H., & Matijević, E. (1994) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1994.0436 · Cited by 83 · see citing works
Preparation of well-defined colloidal barium titanate crystals by the controlled double-jet precipitation
Her, Y. S., Matijevi, E., & Chon, M. C. (1995) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1995.3106 · Cited by 75 · see citing works
Computer Simulation of Final‐Stage Sintering: II, Influence of Initial Pore Size
Chen, I., Hassold, G. N., & Srolovitz, D. J. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06687.x · Cited by 74 · see citing works
Laboratory studies of the grinding and rheology of coal—water slurries
Klimpel, R. C. (1982) · Powder Technology · doi:10.1016/0032-5910(82)85028-6 · Cited by 64 · see citing works
Controlled double-jet precipitation of sparingly soluble salts. A method for the preparation of high added value materials
Stávek, J., Šı́pek, M., Hirasawa, I., & Toyokura, K. (1992) · Chemistry of Materials · doi:10.1021/cm00021a012 · Cited by 60 · see citing works
Grinding Aids
Fuerstenau, D. W. (1995) · KONA Powder and Particle Journal · doi:10.14356/kona.1995006 · Cited by 58 · see citing works
Magnetic properties of high-density Mn-Zn ferrites
Pannaparayil, T., Marande, R. P., & Komarneni, S. (1991) · Journal of Applied Physics · doi:10.1063/1.348025 · Cited by 54 · see citing works
Mössbauer and magnetization studies of nickel ferrites
Marco, M. D., Wang, X. W., Snyder, R. L., Simmins, J. J., Bayya, S. S., White, M., & Naughton, M. J. (1993) · Journal of Applied Physics · doi:10.1063/1.352672 · Cited by 49 · see citing works
Effect of chemical additives on the dynamics of grinding media in wet ball mill grinding
Fuerstenau, D. W., Venkataraman, K. S., & Velamakanni, B. V. (1985) · International Journal of Mineral Processing · doi:10.1016/0301-7516(85)90044-4 · Cited by 47 · see citing works
Bulk magnetic properties of Co-Zn ferrites prepared by the co-precipitation method
Pandya, P. B., Joshi, H. H., & Kulkarni, R. G. (1991) · Journal of Materials Science · doi:10.1007/bf02403950 · Cited by 47 · see citing works
Influence of Environment on Brittle Fracture of Silica
Hammond, M., & Ravitz, S. F. (1963) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1963.tb11740.x · Cited by 45 · see citing works
A multi-torque model for the effects of dispersants and slurry viscosity on ball milling
Fuerstenau, D. W., Kapur, P. C., & Velamakanni, B. V. (1990) · International Journal of Mineral Processing · doi:10.1016/0301-7516(90)90028-w · Cited by 39 · see citing works
Porosity Dependence of Wear and Other Mechanical Properties on Fine-Grain A12O3 and B4C
Wu, C. C. M., & Rice, R. W. (2008) · Ceramic engineering and science proceedings · doi:10.1002/9780470320280.ch51 · Cited by 37 · see citing works
Subdomain zinc ferrite particles: Synthesis and characterization
Pannaparayil, T., Komarneni, S., Marande, R. P., & Zadarko, M. (1990) · Journal of Applied Physics · doi:10.1063/1.345867 · Cited by 35 · see citing works
A Configurational Model of Matter
Samsonov, G. V., Pryadko, I. F., & Pryadko, L. F. (1973) · Springer eBooks · doi:10.1007/978-1-4684-1608-4 · Cited by 32 · see citing works
Dispersions stability and dispersing agents
Laskowski, J. S., & Pugh, R. J. (1992) · Developments in mineral processing · doi:10.1016/b978-0-444-88284-4.50009-3 · Cited by 31 · see citing works
Mechanisms of grinding modification by chemical additives: organic reagents
El‐Shall, H., & Somasundaran, P. (1984) · Powder Technology · doi:10.1016/0032-5910(84)85008-1 · Cited by 30 · see citing works
Monte Carlo simulations for sintering of particle aggregates
MADHAVRAO, L. R., & Rajagopalan, R. (1989) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1989.1251 · Cited by 24 · see citing works
A cascade-cataract charge flow model for power draft of tumbling mills
Kapur, P. C., Ranjan, S., & Fuerstenau, D. W. (1992) · International Journal of Mineral Processing · doi:10.1016/0301-7516(92)90060-a · Cited by 22 · see citing works
The influence of a chemical dispersant on the sizing performance of a 24-in. hydrocyclone
KLIMPEL, R. R. (1982) · Powder Technology · doi:10.1016/0032-5910(82)89013-x · Cited by 22 · see citing works
Magnetic and electrical properties of hot-pressed Ni-Zn-Li ferrites
Mitra, R., Puri, R. K., & Mendiratta, R. G. (1992) · Journal of Materials Science · doi:10.1007/bf01142037 · Cited by 17 · see citing works
The role of silica in sintering barium ferrite
Fang, T., Hwang, J. B., & Shiau, F. (1989) · Journal of Materials Science Letters · doi:10.1007/bf00720195 · Cited by 15 · see citing works
Effects of Powder Processing on the Green Compacts of High‐Purity BaTiO 3
Hsieh, H., & Fang, T. (1989) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1989.tb05968.x · Cited by 13 · see citing works
Creep Mechanisms and Their Role in the Sintering of Metal Powders
Lenel, F. V., & Ansell, G. S. (1966) · Springer eBooks · doi:10.1007/978-1-4684-7706-1_15 · Cited by 11 · see citing works
Random copolymers as dispersion stabilisers part 2. Adsorption onto latices and stabilisation
Buscall, R., & Corner, T. (1986) · Colloids and Surfaces · doi:10.1016/0166-6622(86)80185-8 · Cited by 11 · see citing works
Sintering as a result of defect structure
Schatt, W., & Friedrich, E. (1982) · Crystal Research and Technology · doi:10.1002/crat.2170170903 · Cited by 11 · see citing works
The study of the synthesis and the magnetic properties of M-type strontium hexaferrite from chemical coprecipitation
Chang, C.-M., Tzeng, M. S., & Wang, S. J. (1990) · Journal of Materials Science Letters · doi:10.1007/bf00720174 · Cited by 10 · see citing works
Traditional Utilization of Environment at the Foot of Mt. Sehuri
Nakajima, K. (1986) · Japanese Journal of Human Geography · doi:10.4200/jjhg1948.38.41 · Cited by 8 · see citing works
Optimum Design for Fine and Ultrafine Grinding Mechanisms Using Grinding Media
Tanaka, T. (1995) · KONA Powder and Particle Journal · doi:10.14356/kona.1995007 · Cited by 7 · see citing works
Upgrading magnetic properties of hot-pressed Ni-Zn-Li ferrites
Mitra, R., Puri, R. K., & Mendiratta, R. G. (1992) · Journal of Materials Science Letters · doi:10.1007/bf00729411 · Cited by 6 · see citing works
High-vacancy-content ferrite with fine particles
Kodama, T., Itoh, T., Tabata, M., & Tamaura, Y. (1991) · Journal of Applied Physics · doi:10.1063/1.347838 · Cited by 6 · see citing works
Basis for Construction of Simple Sintering Field Diagrams
Gowri, S., Lund, J. A., & Chaklader, A. C. D. (1992) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.25-26.45 · Cited by 1 · see citing works

Flagged first, then by citations

3 of the 62 references couldn’t be matched to a known paper.

Sorted by citations

Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 826 · see citing works
Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions
Darr, J. A., Zhang, J., Makwana, N. M., & Weng, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00417 · Cited by 623 · see citing works
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 473 · see citing works
Lithium solid-state batteries: State-of-the-art and challenges for materials, interfaces and processing
Boaretto, N., Garbayo, Í., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas‐Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 276 · see citing works
A review of two-step sintering for ceramics
Lóh, N. J., Simão, L., Faller, C. A., Noni, A. D., & Montedo, O. R. K. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.065 · Cited by 273 · see citing works
Glass‐Free Zn 2 Te 3 O 8 Microwave Ceramic for LTCC Applications
Ganesanpotti, S., & Sebastian, M. T. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01673.x · Cited by 121 · see citing works
Effect of high-frequency induction heat sintering conditions on the microstructure and mechanical properties of nanostructured magnesium/hydroxyapatite nanocomposites
Khalil, K. A., & Almajid, A. A. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.11.008 · Cited by 75 · see citing works
Preparation and Microwave Dielectric Properties of Ultra‐low Temperature Sintering Ceramics in K 2 O – MoO 3 Binary System
Zhang, G., Guo, J., He, L. F., Zhou, D., Wang, H., Koruza, J., & Kosec, M. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12646 · Cited by 71 · see citing works
High‐Frequency Induction Heat Sintering of Mechanically Alloyed Alumina–Yttria‐Stabilized Zirconia Nano‐Bioceramics
Kim, S. W., & Khalil, K. A. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00902.x · Cited by 71 · see citing works
Effect of temperature and holding time on the densification of alumina obtained by two-step sintering
Lóh, N. J., Simão, L., Jiusti, J., Noni, A. D., & Montedo, O. R. K. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.03.159 · Cited by 68 · see citing works
Dense and high-stability Ti2AlN MAX phase coatings prepared by the combined cathodic arc/sputter technique
Wang, Z., Liu, J., Wang, L., Li, X., Ke, P., & Wang, A. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.11.183 · Cited by 62 · see citing works
Magnesium-Titanium Alloys: A Promising Solution for Biodegradable Biomedical Implants
Шарма, С. К., Gajević, S., Sharma, L. K., Pradhan, R., Miladinović, S., Ašonja, A., & Stojаnović, B. (2024) · Materials · doi:10.3390/ma17215157 · Cited by 61 · see citing works
Deep reinforcement learning for inverse inorganic materials design
Karpovich, C. J., Pan, E., & Olivetti, E. (2024) · npj Computational Materials · doi:10.1038/s41524-024-01474-5 · Cited by 60 · see citing works
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works
Review on nanocomposites fabricated by mechanical alloying
Taha, M. A., Youness, R. A., & Zawrah, M. F. (2019) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-019-1827-4 · Cited by 56 · see citing works
Recent progress and technical improvement strategies for mitigating ceramic membrane bottlenecks in water purification processes: A review
Omar, N. M. A., Othman, M. H. D., Tai, Z. S., Milad, M., Sokri, M. N. M., & Puteh, M. H. (2023) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.14503 · Cited by 55 · see citing works
Fabrication of M n– C o Spinel Coatings on C rofer 22 APU Stainless Steel by Electrophoretic Deposition for Interconnect Applications in Solid Oxide Fuel Cells
Zhang, Y., Javed, A., Zhou, M., Liang, S., & Xiao, P. (2013) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12013 · Cited by 55 · see citing works
Regolith sintering and 3D printing for lunar construction: An extensive review on recent progress
Suhaizan, M. S., Tran, P., Exner, A., & Falzon, B. G. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00537-1 · Cited by 53 · see citing works
Phase formation and microstructure evolution of arc ion deposited Cr2AlC coating after heat treatment
Li, J. J., Qian, Y., Niu, D., Zhang, M., Liu, Z., & Li, M. S. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.09.082 · Cited by 52 · see citing works
Ultra‐low temperature sintering microwave dielectric ceramics based on Ag 2 O–MoO 3 binary system
Zhang, G., Guo, J., & Wang, H. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14760 · Cited by 51 · see citing works
Review on Additive Manufacturing of Catalysts and Sorbents and the Potential for Process Intensification
Rosseau, L. R. S., Middelkoop, V., Willemsen, H. A. M., Roghair, I., & Annaland, M. V. S. (2022) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2022.834547 · Cited by 49 · see citing works
Highly Porous Materials with Unique Mechanical Properties from Smart Capillary Suspensions
Dittmann, J., Maurath, J., Bitsch, B., & Willenbacher, N. (2015) · Advanced Materials · doi:10.1002/adma.201504910 · Cited by 48 · see citing works
Microwave dielectric properties and vibrational spectroscopic analysis of MgTe2O5 ceramics
Ganesanpotti, S., Ratheesh, R., Jacob, M. V., & Sebastian, M. T. (2008) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2008.0212 · Cited by 41 · see citing works
Enhanced Curie temperature and superior temperature stability by site selected doping in BCZT based lead-free ceramics
Kumari, S., Kumar, A., Kumar, A., Kumar, V., Thakur, V. N., Kumar, A., Goyal, P. K., Gaur, A., Arya, A., & Sharma, A. L. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.260 · Cited by 35 · see citing works
Porous carbonated hydroxyapatite-based scaffold using simple gas foaming method
Januariyasa, I. K., & Yusuf, Y. (2020) · Journal of Asian Ceramic Societies · doi:10.1080/21870764.2020.1770938 · Cited by 35 · see citing works
Synthesis of nanocrystallized zirconium carbide based on an aqueous solution-derived precursor
Wang, J.-X., Ni, D., Dong, S., Yang, G., Gao, Y., Kan, Y., Chen, X., Cao, Y., & Zhang, X. (2017) · RSC Advances · doi:10.1039/c7ra02586f · Cited by 34 · see citing works
Taguchi Grey Relational Optimization of the Multi-mechanical Characteristics of Kaolin Reinforced Hydroxyapatite: Effect of Fabrication Parameters
Abifarin, J. K., Obada, D. O., Dauda, E. T., & Oyedeji, E. O. (2021) · International Journal of Grey Systems · doi:10.52812/ijgs.30 · Cited by 33 · see citing works
Investigation on growth mechanism and gyromagnetic properties of low-sintered Li0.43Zn0.27Ti0.13Fe2.17O4 ferrite doped with Nb2O5 and glass sintering additives
Xu, F., Yang, Y., Shi, X., Liao, Y., Liu, Y., Wang, X., Xie, F., & Hu, J. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.160957 · Cited by 32 · see citing works
Disorder-driven sintering-free garnet-type solid electrolytes
Kwon, G., Gwon, H., Bae, Y., Jung, C., Ko, D., Kim, M. G., Yoon, K., Yoon, G., Kim, S., Jung, I., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-58108-7 · Cited by 31 · see citing works
Dense gypsum ceramics prepared by room-temperature cold sintering with greatly improved mechanical properties
Li, L., Yan, H., Hong, W. B., Wu, S. Y., & Chen, X. M. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.06.003 · Cited by 31 · see citing works
Novel strategy for improving the oxygen permeability of zirconia-based dual-phase membranes
Kwon, Y.-I., Park, J. H., Kang, S. M., Nam, G. D., Lee, J. W., Kim, J. H., Kim, D., Jeong, S. M., Yu, J. H., & Joo, J. H. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03105c · Cited by 29 · see citing works
Mechanical wet-milling and subsequent consolidation of ultra-fine Al2O3-(ZrO2+3%Y2O3) bioceramics by using high-frequency induction heat sintering
Khalil, K. A., & Kim, S. W. (2007) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(07)60042-9 · Cited by 27 · see citing works
Effect of W ion doping on magnetic and dielectric properties of Ni–Zn ferrites by “one-step synthesis”
Fu, X., Ge, H., Xing, Q., & Peng, Z. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.05.022 · Cited by 27 · see citing works
Cold sintering process: A green route to fabricate thermoelectrics
Ding, J., Guo, J., Yan, R., Li, W., Ma, S., Fu, Y., Xie, W., Riedel, R., & Weidenkaffa, A. (2024) · Journal of Advanced Ceramics · doi:10.26599/jac.2024.9220965 · Cited by 26 · see citing works
Structural, dielectric and ferroelectric properties of Cu2+- and Cu2+/Bi3+-doped BCZT lead-free ceramics: a comparative study
Kumari, S., Kumar, A., Kumar, V., Dubey, S. K., Goyal, P. K., Kumar, S., Sharma, A. L., & Arya, A. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-06252-3 · Cited by 26 · see citing works
Effect of sintering time on microstructure and optical properties of yttria-partially stabilized monolithic zirconia
Yousry, M. A., Hammad, I. A., Halawani, M., & Aboushelib, M. N. (2023) · Dental Materials · doi:10.1016/j.dental.2023.10.012 · Cited by 26 · see citing works
Bismuth trioxide-tailored sintering temperature, microstructure and NTCR characteristics of Mn 1.1 Co 1.5 Fe 0.4 O 4 ceramics
Wang, B., Wang, J., Chang, A., & Yao, J. (2019) · RSC Advances · doi:10.1039/c9ra04676c · Cited by 24 · see citing works
Fabrication of yttria-stabilized-zirconia coatings using electrophoretic deposition: Effects of agglomerate size distribution on particle packing
Ji, C., Shapiro, I. P., & Xiao, P. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2009.05.032 · Cited by 24 · see citing works
Effect of Processing Parameters on the Mechanical and Microstructural Behavior of Ultra‐Fine Al 2 O 3 – (ZrO 2 +8%Mol Y 2 O 3 ) Bioceramic, Densified By High‐Frequency Induction Heat Sintering
Khalil, K. A., & Kim, S. W. (2006) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2006.02087.x · Cited by 23 · see citing works
Development and Characterization of Titanium Dioxide Ceramic Substrates with High Dielectric Permittivities
Freitas, A. E., Manhabosco, T. M., Batista, R. J. C., Segundo, A. K. R., Araujo, H. X., Araújo, F. G. S., & da Costa, A. R. (2020) · Materials · doi:10.3390/ma13020386 · Cited by 22 · see citing works
Thermal shock resistance of two micro-structured alumina obtained by natural sintering and SPS
Belghalem, H., Hamidouche, M., Grémillard, L., Bonnefont, G., & Fantozzi, G. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.06.045 · Cited by 21 · see citing works
Preparation and electrical properties of copper–nickel manganite ceramic derived from mixed oxalate
Gao, J.-F., Fang, D.-L., Wang, Z., Yang, P., & Chen, C. (2006) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2006.09.005 · Cited by 21 · see citing works
Construction of Inorganic Bulks through Coalescence of Particle Precursors
Mu, Z., Tang, R., & Liu, Z. (2021) · Nanomaterials · doi:10.3390/nano11010241 · Cited by 20 · see citing works
Microstructural characterization and mechanical properties on Al2O3–TiO2 materials obtained by uniaxial pressing and extrusion
Alves, P. C. F., da Silva, D. G., Vasconcelos, D. C. L., Vilela, J. J., do Nascimento, J. F., de Melo, D. C., & Vasconcelos, W. L. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.05.227 · Cited by 20 · see citing works
Plastic forming and microstructural development of α-alumina ceramics from highly compacted green bodies using extrusion
Kaya, C., & Butler, E. G. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(01)00523-4 · Cited by 20 · see citing works
Advanced Ceramics: Stages of Development
Zawrah, M. F., Taha, M. A., & Youness, R. A. (2023) · Advances in material research and technology · doi:10.1007/978-3-031-43918-6_1 · Cited by 19 · see citing works
Artificial lightweight aggregate made from alternative and waste raw materials, hardened using the hybrid method
Stempkowska, A., & Gawenda, T. (2024) · Scientific Reports · doi:10.1038/s41598-024-67454-3 · Cited by 19 · see citing works
Microwave Dielectric Properties of ATe3O8 (A = Sn, Zr) Ceramics
Ganesanpotti, S., & Sebastian, M. T. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.7943 · Cited by 19 · see citing works
Scalable foaming assisted synthesis of ZrC nanopowder by carbothermal reduction
Li, F., Huang, X., & Zhang, G. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.10.170 · Cited by 19 · see citing works
Machine Learning-Assisted Materials Design and Discovery of Low-Melting-Point Inorganic Oxides for Low-Temperature Cofired Ceramic Applications
Qin, J., Liu, Z., Ma, M., & Li, Y. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c06983 · Cited by 18 · see citing works
Low temperature sintering lead‐free dielectric xBiScO3 ‐(1‐x) BaTiO3 for energy storage applications
Joseph, J., Du, Y., Cheng, Z., & Zhang, S. J. (2023) · EcoMat · doi:10.1002/eom2.12331 · Cited by 17 · see citing works
Materials and underlying principles in vat photopolymerization-based additive manufacturing of electronic ceramics
Tang, W., Goh, G. L., Lee, J. M., Tang, Y., Sun, C., Dou, R., Wang, L., Yeong, W. Y., Zhang, X., & Zhang, Y. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101498 · Cited by 16 · see citing works
Dual plate-like grains of (Ti, Zr)B2 and W2B5 toughened solid solution composites fabricated via in-situ reaction spark plasma sintering of (Ti, W)C and ZrB2 powders
Wei, B., Jiang, W., Wang, D., Wang, L., Chen, L., & Wang, Y. (2024) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2024.03.066 · Cited by 15 · see citing works
3D Printing of in Office Custom-Made Brackets: Concept, Design, Production and Evidence
Panayi, N. C. (2023) · Seminars in Orthodontics · doi:10.1053/j.sodo.2022.12.006 · Cited by 14 · see citing works
Microwave sintering of CaMnO3 thermoelectric perovskites synthesized by modified Pechini method
Rosa, J. P. M. M., Torres, S. O. A., Thomazini, D., & Gelfuso, M. V. (2023) · Materials Science and Engineering B · doi:10.1016/j.mseb.2023.116956 · Cited by 12 · see citing works
Crystal structure and microwave dielectric properties of Li 2 (Mg 1– x Cu x ) 2 Mo 3 O 12 ceramics sintered at ultra‐low temperature
Yuan, Q., Meng, Y., Wang, T., Hu, W., Wang, S., Liu, G., Wang, Q., Song, K., Zhao, H., Yan, S., et al. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.19787 · Cited by 12 · see citing works
Influence of electric field strength on structure, microstructure, and electrical properties of flash sintered 8% mol Yttria-stabilized zirconia as a solid oxide fuel cell electrolyte
Mohebbi, H., & Mirkazemi, S. M. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.04.029 · Cited by 12 · see citing works
Stress and Manufacturability in Solid-State Lithium-Ion Batteries
Mamtaz, M. R. B., Michaud, X., Jo, H., & Park, S. S. (2023) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-023-00519-2 · Cited by 11 · see citing works
Evolution of debinding and sintering of a silica-based ceramic using vat photopolymerization additive manufacturing
Bezek, L. B., Wilkerson, R., Chad, J. L., Quintana, T. E., Patterson, B. M., Adhikari, S., & Lee, K. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104795 · Cited by 11 · see citing works
Direct Fabrication of Bulk Nanostructured Ceramic from Nano-Al2O3 Powders by Selective Laser Sintering
Shen, L., Huang, Y., Tian, Z. J., & Hua, G. R. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.329.613 · Cited by 11 · see citing works
Pressureless sintering kinetics analysis of Ti3SiC2 and Ti2AlC powdered MAX phases
Córdoba, J. M. (2024) · Discover Materials · doi:10.1007/s43939-024-00098-2 · Cited by 10 · see citing works
Textured Pb(Mg1/3Nb2/3)O3 −Pb(In1/2Nb1/2)O3 −PbTiO3 ceramics with enhanced piezoelectric properties and high Curie temperature prepared by low-temperature sintering
Zate, T. T., Ko, N.-R., Yu, H.-L., Sun, J., Jo, W., & Jeon, J.-H. (2023) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2023.114929 · Cited by 10 · see citing works
High-Temperature Thermal Reactivity and Interface Evolution of the NMC-LATP-Carbon Composite Cathode
Valiyaveettil-SobhanRaj, S., Cid, R., Thompson, T., Bonilla, F., López, G. A., Aguesse, F., & Casas‐Cabanas, M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c20097 · Cited by 10 · see citing works
Preparation of ultra-fine cobalt–nickel manganite powders and ceramics derived from mixed oxalate
Zheng, C.-H., & Fang, D.-L. (2007) · Materials Research Bulletin · doi:10.1016/j.materresbull.2007.06.061 · Cited by 10 · see citing works
High-pressure low-temperature densification of NASICON-based LATP electrolytes for solid-state lithium batteries
Valiyaveettil-SobhanRaj, S., Głuchowski, P., López‐Aranguren, P., Aguesse, F., Sampathkumar, R., Thompson, T., Rojviriya, C., Manalastas, W. W., Srinivasan, M., & Casas‐Cabanas, M. (2023) · Materialia · doi:10.1016/j.mtla.2023.101999 · Cited by 9 · see citing works
Development of highly dense Ga-LLZO solid electrolyte pallet for All-Solid-State Battery using Machine Learning Approach
Chaudhary, A. K. (2025) · Solid State Communications · doi:10.1016/j.ssc.2025.116038 · Cited by 9 · see citing works
High-performance 0.9Al2O3-0.1TiO2 microwave dielectric ceramics prepared by digital light processing
Wang, X.-M., Wu, J., Fang, L., Yang, Y., Liu, C.-L., He, Z., Wang, C., & Shi, Y. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.08.320 · Cited by 9 · see citing works
The use of boron based materials on efficiency of environmentally friendly porous ceramics
Göl, F., Kaçar, E., Sarıtaş, Z. G., Cıbuk, S., Ture, C., Arslan, M., & Şen, F. (2022) · Environmental Research · doi:10.1016/j.envres.2022.114454 · Cited by 9 · see citing works
Microstructural and microwave dielectric properties of LZT (Li2ZnTi3O8) ceramics sintered in presence of bismuth borate glass for LTCC applications
Zitani, M. K., Ebadzadeh, T., Banijamali, S., Riahifar, R., Rüssel, C., Zscheckel, T., & Ren, H. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.197 · Cited by 9 · see citing works
Effects of particle sizes of starting oxides on the properties of spinel-type Mn1.1Co1.5Fe0.4O4 negative temperature coefficient ceramics
Wang, B., Wang, J., Chang, A., & Yao, J. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.09.097 · Cited by 9 · see citing works
Sintering and Densification (I)—Conventional Sintering Technologies
Kong, L. B., Huang, Y., Que, W., Zhang, T., Li, S., Zhang, J., Dong, Z., & Tang, D. (2015) · Topics in mining, metallurgy and materials engineering · doi:10.1007/978-3-319-18956-7_5 · Cited by 9 · see citing works
A remarkable permeability enhancement of Ni1−xZnxFe2O4 (x = 0.65 and 0.70), using a multi-compound calcined additive
Shatooti, S., & Mozaffari, M. (2024) · Scientific Reports · doi:10.1038/s41598-024-64016-5 · Cited by 8 · see citing works
The co-fired behaviors between Ag and glass–ceramics materials in LTCC
Cui, X., Li, B., Shen, J., Wang, Y., & Zhou, J. P. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9239-7 · Cited by 8 · see citing works
Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO 2 -assisted process: a parametric study for achieving cubic phase stability
Avédikian, L., Vulliet, J., David, T., & Hertz, A. (2024) · New Journal of Chemistry · doi:10.1039/d4nj00976b · Cited by 7 · see citing works
Integrated cold sintering of ceramic circuit substrate for power device packaging
Lei, Z., Ding, Y., Ju, X., Wang, Q., Peng, Y., & Chen, M. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.01.557 · Cited by 7 · see citing works
Harnessing the Morphotropic Phase Boundary in (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 Perovskites for Piezoelectric Energy Harvesting: Experimental and DFT Investigations
Mitra, R., & Manju, U. (2025) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c01528 · Cited by 7 · see citing works
Improved Artificial Aggregates for Use in Green Roof Design
Stempkowska, A., & Gawenda, T. (2024) · Sustainability · doi:10.3390/su16135512 · Cited by 7 · see citing works
Recent advances in the application of dolomite in membrane separation and beyond: A review on an abundant and versatile mineral
Siddique, M. S., Hashim, N. A., Junaidi, M. U. M., Ullah, A., Yusoff, R. B., & Rabuni, M. F. (2024) · Materials Today Sustainability · doi:10.1016/j.mtsust.2024.100951 · Cited by 8 · see citing works
Microwave Sintering of Yttria-Stabilised Zirconia
Ting, M. L., Ting, C. H., Chin, K. L., Yeo, W. H., Jun, H. K., Ng, C. K., & Singh, R. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/268/1/012053 · Cited by 7 · see citing works
Short Review of Flash Sintering: Mechanisms, Microstructures, and Mechanical Properties
Cho, J. (2023) · Ceramist · doi:10.31613/ceramist.2023.26.2.04 · Cited by 7 · see citing works
3D microstructure construction and quantitative evaluation of sintered ZrO2 under different sintering conditions
Xia, Z., Chen, B., & Lu, K. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7381-y · Cited by 7 · see citing works
Synthesis of nanosized glass powders using non-transferred dc thermal plasma process
Cho, S., Shim, H., So, K., Kim, S. H., Samal, S. M., Park, D., & Kim, H. H. (2013) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/1743676112y.0000000074 · Cited by 7 · see citing works
Mechanical performance of lightweight ceramic structures via binder jetting of microspheres
Mummareddy, B., Burden, E., Carrillo, J. G., Myers, K., MacDonald, E. W., & Cortes, P. (2021) · SN Applied Sciences · doi:10.1007/s42452-021-04404-y · Cited by 7 · see citing works
Radio Frequency Plasma Spheroidization of Alumina as a Feedstock Material for Ceramic 3D Printing
Krishna, R., Sreenivasan, M., Lyutyk, M., Barosh, M., & Çolak, İ. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-09238-4 · Cited by 6 · see citing works
Rapid densification of low-positive thermal expansion Al2W3O12 ceramics
Mařák, V., Henriques, M. D. R., Marinković, B. A., & Drdlík, D. (2024) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2024.04.036 · Cited by 6 · see citing works
Fabrication and characterization of corundum-mullite composite solar thermal storage ceramics with enhanced thermophysical properties
Shen, Y., Xu, X., Wu, J., Qiu, S., Zhang, D., & Shi, X. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.03.047 · Cited by 6 · see citing works
Microwave assisted sintering of La3+ and V5+ doped CaMnO3 perovskites for energy harvesting applications
Rosa, J. P. M. M., Torres, S. O. A., Thomazini, D., & Gelfuso, M. V. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.175809 · Cited by 6 · see citing works
Low-Temperature Sintering of Colloidal Gold Nanoparticles by Salt Addition
Catanzaro, L., Scardaci, V., Scuderi, M., Condorelli, M., D’Urso, L., & Compagnini, G. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10265-4 · Cited by 5 · see citing works
High‐Frequency Induction Heat Sintering of Mechanically Alloyed Alumina–Yttria‐Stabilized Zirconia Nano‐Bioceramics
Kim, S. W., & Khalil, K. A. (2009) · doi:10.1002/9780470588260.ch11 · Cited by 5 · see citing works
Sintering lunar regolith pellets: a comparison of four samples from Apollo 11, 15, and 16
Lomax, B. A., Charpentier, G., Nizet, A., Rützler, A., Kahan, A. S., McDonald, F. E., Lindner, R., & Carpenter, J. D. (2025) · Materials Today Advances · doi:10.1016/j.mtadv.2025.100620 · Cited by 4 · see citing works
In situ visualisation of the sintering process and phase evolution in Bi2O3-doped Ba0.95Ca0.05Ti0.92Zr0.08O3 lead-free ferroelectric ceramics
Tian, Y., Liu, C., Chen, M., Pan, Y., Wu, H., Ji, X., Liu, P., & Jing, Q. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.09.295 · Cited by 4 · see citing works
Microstructural evolution during sintering and thermoelectric characterization of La3+ and/or Nb5+ doped CaMnO3 perovskites
Torres, S. O. A., Rosa, J. P. M. M., Balthazar, G. P., Thomazini, D., & Gelfuso, M. V. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.03.409 · Cited by 4 · see citing works
Influence of particle size of initial oxides on the dielectric properties of ilmenite-type Zn0.7Mg0.3TiO3 ceramics
Fan, L., Li, Y., Li, J., Xiang, Q., Wang, X., Wen, T., Zhong, Z., Li, F., & Liao, Y. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.11.111 · Cited by 4 · see citing works
Enhanced dielectric properties by doping Jahn-Teller Mn ions in ilmenite-type Zn0.7Mg0.3TiO3 ceramics
Fan, L., Li, Y., Li, F., Li, J., Gu, K. X., & Liao, Y. (2025) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2025.109647 · Cited by 4 · see citing works
Ceramics—The Forgotten but Essential Ingredients for a Circular Economy on the Moon
Ellery, A. A. (2025) · Ceramics · doi:10.3390/ceramics8030107 · Cited by 4 · see citing works
Study on Microwave Performance of Low-Temperature Sintered, Ba(CoTi)1.5Fe9O19 Ferrite for Application at UHF Frequency
Wang, Y., Liu, Y., Wu, C., Liu, Q., Gao, L., Li, J., & Zhang, H. (2017) · Journal of Superconductivity and Novel Magnetism · doi:10.1007/s10948-017-4156-8 · Cited by 4 · see citing works
Choosing Carbon Conductive Additives for NMC-LATP Composite Cathodes: Impact on Thermal Stability
Valiyaveettil-SobhanRaj, S., Enterría, M., Cid, R., Saurel, D., Nolis, G. M., Marchini, F., Thompson, T., Aguesse, F., & Casas‐Cabanas, M. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/accab1 · Cited by 4 · see citing works
Carbonated Hydroxyapatite Derived from Snail Shells (Pilla ampulacea): The Influence of Sintering Temperature on Purity and Crystallography Properties
Januariyasa, I. K., & Yusuf, Y. (2020) · Materials science forum · doi:10.4028/www.scientific.net/msf.975.82 · Cited by 4 · see citing works
Toughening of zirconia ceramics with micro-nano binary particles
Luo, F., Wen, J., Tian, X., Zhu, L., Li, C., Cao, J., Li, G., Kang, W., Lin, H., & Luo, F. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.02.413 · Cited by 3 · see citing works
Subcritical crack growth in cold sintered ZnO ceramics
Jabr, A., Supancic, P. H., & Bermejo, R. (2025) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2025.117761 · Cited by 3 · see citing works

Authors: Kuang, X., Carotenuto, G., & Nicolais, L.
Affiliations: University of Naples Federico II (IT)
ORCID: Carotenuto, G.
Nicolais, L.
Venue: Advanced Performance Materials
Publisher: Springer Science and Business Media LLC
Published: 1997-07
Volume: 4
Issue: 3
Pages: 257-274
ISSN: 0929-1881 (ISSN-L)
1572-8765
DOI: 10.1023/a:1008621020555
OpenAlex: W80522790
Cited by: 147
References: 62
Citations by year: 2026: 11 · 2025: 24 · 2024: 19 · 2023: 17 · 2022: 8 · 2021: 10 · 2020: 8 · 2019: 5 · 2018: 1 · 2017: 6 · 2016: 2 · 2015: 3 · 2014: 5 · 2013: 8 · 2012: 2
FWCI: 0.00
Type: journal article
Language: en
Open access: closed
Licence: www.springernature.com/gp/researchers/text-and-data-mining (tdm)
www.springernature.com/gp/researchers/text-and-data-mining (vor)
Locations: Advanced Performance Materials (publishedVersion)
Topics: Physical Sciences › Materials Science › Ceramics and Composites › Advanced ceramic materials synthesis
Physical Sciences › Engineering › Electrical and Electronic Engineering › Microwave Dielectric Ceramics Synthesis
Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrical and Thermal Properties of Materials
Keywords: ceramic sintering, sintering temperature reduction, powder production, compaction, sintering process optimization, low temperature co-fired ceramic, sintering theory

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

A review of ceramic sintering and suggestions on reducing sintering temperatures

Integrity signals

Claims the paper makes

Claims other papers make about this one

Cites

Cited by

Related

Record

About these checks