Effect of filler type on the mechanical properties of self-reinforced polylactide–calcium phosphate composites
The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
Bioabsorbable polymers are of interest as internal fracture fixation devices. Self-reinforcement has been developed to improve the mechanical properties of the material and the addition of calcium phosphate fillers improves the bioactivity. Composite plates, produced by compression molding preimpregnated sheets of polylactide fibers coated in a polylactide matrix have been degraded in simulated body fluid for up to 12 weeks. Some samples also contained hydroxyapatite or tricalcium phosphate filler particles. Degradation was measured by monitoring the water uptake and mass decrease of the samples, as well as carrying out four point bend tests to assess the mechanical properties of the material. By 12 weeks, it was found that the unfilled samples absorbed more water and showed greater mass loss than the samples containing calcium phosphate fillers. Also, the flexural modulus and yield stress decreased significantly at week 12 for the unfilled samples. Adding hydroxyapatite (HA) or tricalcium phosphate (TCP) to the composite increased the flexural modulus and yield strength to values within the range of those reported for cortical bone and these values were maintained over the 12-week period.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Solutions able to reproduce in vivo surface‐structure changes in bioactive glass‐ceramic A‐W3
Kokubo, T., Kushitani, H., Sakka, S., Kitsugi, T., & Yamamuro, T. (1990) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820240607 · Cited by 3,836
Biodegradable self-reinforced composite materials; Manufacturing structure and mechanical properties
Törmälä, P. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90081-4 · Cited by 332
Self-citationBIODEGRADABLE IMPLANTS IN FRACTURE FIXATION: EARLY RESULTS OF TREATMENT OF FRACTURES OF THE ANKLE
Rokkanen, P., Vainionpää, S., Törmälä, P., Kilpikari, J., Böstman, O., Vihtonen, K., Laiho, J., & Tamminmäki, M. (1985) · The Lancet · doi:10.1016/s0140-6736(85)91847-1 · Cited by 293
Self-citationBioabsorption of polylactides with different molecular properties
Nakamura, T., Hitomi, S., Watanabe, S., Shimizu, Y., Jamshidi, K., Hyon, S. ‐., & Ikada, Y. (1989) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820231003 · Cited by 241
In vitro and in vivo studies on bioabsorbable ultra‐high‐strength poly(L‐lactide) rods
Matsusue, Y., Yamamuro, T., Oka, M., Shikinami, Y., Hyon, S., & Ikada, Y. (1992) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820261203 · Cited by 200
Evaluation of hydroxylapatite/poly(l‐lactide) composites: Mechanical behavior
Verheyen, C. C. P. M., De Wijn, J. R., Van Blitterswijk, C. A., & De Groot, K. (1992) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820261003 · Cited by 197
Bioabsorbable polymers: Materials technology and surgical applications
TÖrmälä, P., Pohjonen, T., & Rokkanen, P. (1998) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1243/0954411981533872 · Cited by 176
Self-citationMechanical characterization of biodegradable implants
Claes, L. (1992) · Clinical Materials · doi:10.1016/0267-6605(92)90083-6 · Cited by 142
Verheyen, C. C. P. M., de Wijn, J. R., van Blitterswijk, C., de Groot, K., & Rozing, P. M. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270404 · Cited by 138
Preparation and mechanical properties of calcium phosphate/copoly-L-lactide composites
Kikuchi, M., Suetsugu, Y., Tanaka, J., & Akao, M. (1997) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1018580816388 · Cited by 122
Research works printed but not linked: 5
- M. Dauner, H. Planck, L. Caramaro, Y. Missirlis and E. Panagiotopoulos, J. Mater. Sci: Mater. Med. 9 (1998) 173.
- M. Kikuchi, Y. Suetsugu, J. Tanka and M. Akao, J. Mater. Sci.: Mater. Med. 8 (1997) 361.
- T. Yasunaga, Y. Matsusue, T. Furukawa, Y. Shikinami, M. Okuno and T. Nakamura, ibid. 47 (1999) 412. · doi:10.1002/(sici)1097-4636(19991205)47:3<412::aid-jbm17>3.0.co;2-b
- M. KellomÄki, K. E. Tanner, W. Bonfield and P. TÖrmÄlÄ, in “Proceedings of the 13th European Conference on Biomaterials”, 1997, p. 90.
- P. TÖrmÄlÄ, M. KellomÄki, W. Bonfield and K. E. Tanner, US Patent Appl. No. 08/921,533 (1997).
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Biphasic calcium phosphate nanocomposite porous scaffolds for load-bearing bone tissue engineering
Ramay, H. R. R., & Zhang, M. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.023 · Cited by 471
“Due to diminutive amount of particulate inclusion, nanofibers made of HA can be easily resorbed in vivo [34].”
BackgroundMano, J. F., Sousa, R. A., Boesel, L. F., Neves, N. M., & Reis, R. L. (2004) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.001 · Cited by 450
“Materials based on the concept of self-reinforcement, using polylactides, with the addition of TCP or HA were studied using conventional mechanical testing [188] and dynamic mechanical analysis [189].”
MethodCalcium orthophosphate-based biocomposites and hybrid biomaterials
Dorozhkin, S. V. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3124-x · Cited by 300
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Biocomposites and hybrid biomaterials based on calcium orthophosphates
Dorozhkin, S. V. (2011) · Biomatter · doi:10.4161/biom.1.1.16782 · Cited by 198
Auras, R., Harte, B., & Selke, S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20148 · Cited by 190
Calcium Orthophosphate-Containing Biocomposites and Hybrid Biomaterials for Biomedical Applications
Dorozhkin, S. (2015) · Journal of Functional Biomaterials · doi:10.3390/jfb6030708 · Cited by 168
“Based on a self-reinforcement concept, biocomposites of TCP with polylactides were prepared and studied using conventional mechanical testing [401].”
MethodTajbakhsh, S., & Hajiali, F. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.09.008 · Cited by 161
Iñiguez-Franco, F., Auras, R., Burgess, G., Holmes, D., Fang, X., Rubino, M., & Soto-Valdez, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.018 · Cited by 159
Overview of Poly(lactic acid) (PLA) fibre
Avinç, O., & Khoddamı, A. (2010) · Fibre Chemistry · doi:10.1007/s10692-010-9226-7 · Cited by 163
Park, S., Lee, S. G., & Kim, S. H. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.10.011 · Cited by 152
Zhang, M., Ding, X., Zhan, Y., Wang, Y., & Wang, X. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121260 · Cited by 121
Persson, M., Lorite, G. S., Cho, S.-W., Tuukkanen, J., & Skrifvars, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401895f · Cited by 92
Surface characterization of poly(lactic acid) and polycaprolactone by inverse gas chromatography
Cava, D., Gavara, R., Lagaron, J. M., & Voelkel, A. (2007) · Journal of Chromatography A · doi:10.1016/j.chroma.2007.02.110 · Cited by 100
Wang, Z., Wang, Y., Ito, Y., Zhang, P., & Chen, X. (2016) · Scientific Reports · doi:10.1038/srep20770 · Cited by 104
Iñiguez‐Franco, F., Auras, R. A., Ahmed, J., Selke, S. E. M., Rubino, M. I., Dolan, K. D., & Soto‐Valdez, H. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.02.028 · Cited by 81
Bioactive ceramic-reinforced composites for bone augmentation
Tanner, K. E. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0229.focus · Cited by 79
“(1997) and Bleach et al. (2001, 2002), who reinforced PLA with HA or tricalcium phosphate (TCP) particles and then used this composite to act as the matrix around drawn PLA fibres, thus creating a three-phase fibrereinforced composite. The stiffness and strength were at the lower bounds of those for cortical bone at o…”
MethodInfluentialSelf-citationShen, L. H., Yang, H., Jia, Y., Qiao, F., & Peng, M. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3785-2 · Cited by 66
“In the Fig. 3b, it illustrates that the flexural modulus performed the similar trend to Fig. 3a. The trend is nearly the same as the literatures reported, but the flexural strength is almost 4‐6 times that of the HA/PLA composite [ 14 ].”
ResultHigh‐Performance Carbon Nanotube‐Reinforced Bioplastic
Ramontja, J., Ray, S. S., Pillai, S. K., & Luyt, A. S. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900197 · Cited by 66
Blanco, I., & Siracusa, V. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2535-8 · Cited by 54
“PLA has been widely studied for use in medical applications because of its bioresorbable and biocompatible properties in the human body [1–13].”
BackgroundMechanical properties and porosity of polylactide for biomedical applications
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27116 · Cited by 50
Accelerated ageing and degradation in poly-l-lactide/hydroxyapatite nanocomposites
Delabarde, C., Plummer, C. J. G., Bourban, P. ‐., & Månson, J. E. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.12.018 · Cited by 47
Dorozhkin, S. V. (2024) · Journal of Composites Science · doi:10.3390/jcs8060218 · Cited by 50
Calcium phosphate formation and ion dissolution rates in silica gel-PDLLA composites
Korventausta, J., Jokinen, M., Rosling, A., Peltola, T., & Yli‐Urpo, A. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00425-3 · Cited by 39
Charles, L. F., Kramer, E. R., Shaw, M. T., Olson, J. R., & Wei, M. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.09.007 · Cited by 38
Simpson, R., Nazhat, S. N., Blaker, J. J., Bismarck, A., Hill, R. G., Boccaccini, A. R., Hansen, U. N., & Amis, A. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.008 · Cited by 38
Absorption and release of protein from hydroxyapatite-polylactic acid (HA-PLA) membranes
Talal, A., Waheed, N., Al-Masri, M., McKay, I. J., Tanner, K. E., & Hughes, F. J. (2009) · Journal of Dentistry · doi:10.1016/j.jdent.2009.06.014 · Cited by 30
“Bleach et al.10 have shown that HA increases the flexural modulus and yield strength of a polymer composite.”
BackgroundSelf-citationMechanical and Thermal Properties of Poly(Lactic Acid)/Starch/Montmorillonite Biodegradable Blends
Ren, J., Liu, Z., & Ren, T. (2007) · Polymers and Polymer Composites · doi:10.1177/096739110701500806 · Cited by 27
KOBAYASHI, S., & Yamadi, S. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.008 · Cited by 25
Zhang, S., Li, H., Yuan, M., Yuan, M., & Chen, H. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18102041 · Cited by 26
“Moreover, PLA degradation products are non-toxic at a lower composition, making it a natural choice for biomedical applications [21,22].”
BackgroundDAI, X. H., Shi, X., Huo, C., & Wang, X. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.09.015 · Cited by 24
Perale, G., Pertici, G., Giordano, C., Daniele, F., Masi, M., & Maccagnan, S. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27875 · Cited by 21
Bioactive glass and biodegradable polymer composites
Niemelä, T., & Kellomäki, M. (2011) · Elsevier eBooks · doi:10.1533/9780857093318.2.227 · Cited by 19
Self-citationPetisco-Ferrero, S., Fernández, J., Martín, M. M. F. S., Ibarburu, P. A. S., & Oiz, J. R. S. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.04.027 · Cited by 18
Bending and Compressive Properties of Crystallized TCP/PLLA Composites
KOBAYASHI, S., & Sakamoto, K. (2009) · Advanced Composite Materials · doi:10.1163/156855109x434694 · Cited by 13
Stio, M., Martinesi, M., Treves, C., & Borgioli, F. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.08.010 · Cited by 13
Balogová, A. F., Trebuňová, M., Bačenková, D., Kohan, M., Hudák, R., Tóth, T., Schnitzer, M., & Živčák, J. (2022) · Polymers · doi:10.3390/polym14245441 · Cited by 11
“[3] found that PLLA absorbed more water and showed more significant mass loss than samples containing hydroxyapatite (HA) or calcium phosphate (TCP) after immersion in simulated body fluid (SBF) for 12 weeks.”
BackgroundRamsay, S. D., Pilliar, R. M., & Santerre, J. P. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31639 · Cited by 11
Preparation and properties of polylactide/nano‐silica in situ composites
Liu, L., Hong-jie, M., Zhu, X., Fan, Y., & Jin, Z. (2009) · Pigment & Resin Technology · doi:10.1108/03699421011009564 · Cited by 11
KOBAYASHI, S., & Sakamoto, K. (2006) · JSME International Journal Series A · doi:10.1299/jsmea.49.314 · Cited by 10
Kasprzak, M., Szabłowska, A., Kurzyk, A., Tymowicz‐Grzyb, P., Najmrodzki, A., Woźniak, A., Antosik, A., Pagacz, J., Szterner, P., Plichta, A., et al. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms231810454 · Cited by 11
“[39] reported that the PLA composites without inclusion of fillers enabled absorption more water and showed greater loss in its weight compared to the composites with included HA or tricalcium phosphate (TCP) fillers, when immersing the materials in simulated body fluid (SBF) for 12 weeks.”
MethodKokuzawa, T., Hirabayashi, S., Ikemoto, Y., Park, J., Ikura, R., Takashima, Y., Higuchi, Y., & Matsuba, G. (2024) · Polymer · doi:10.1016/j.polymer.2024.126922 · Cited by 8
Wei, H., Menary, G., Buchanan, F., Yan, S., & Nixon, J. (2020) · International Journal of Material Forming · doi:10.1007/s12289-020-01539-y · Cited by 7
Szczepanska, P., Szymanowski, H., Suwalska, M., Rosińska, K., Skrodzki, M., Uznański, P., Bociąga, D., Bubko, I., Drozd, E., Gruber, B., et al. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.10.263 · Cited by 6
Bioabsorbable fabrics for musculoskeletal scaffolds
Kellomäki, M., Laine, K., Ellä, V., & Annala, T. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-017-0.00004-0 · Cited by 8
Self-citationEffects of Crystallinity on the Mechanical Properties of TCP/PLLA Composites
KOBAYASHI, S., & Sakamoto, K. (2008) · Journal of Solid Mechanics and Materials Engineering · doi:10.1299/jmmp.2.1232 · Cited by 4
Hasan, M. S. (2012) · Nottingham ePrints (University of Nottingham) · Cited by 10
Biomimetic Gelatin Nanocomposite as a Scaffold for Bone Tissue Repair
Khan, M. N., Hasan, M. M., Islam, M. S., Biswas, S., Rashid, T. U., Mallik, A. K., Zaman, A., Sharmeen, S., Haque, P., & Rahman, M. M. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch166 · Cited by 4
Production and applications of polylactic acid
Pandey, A. K., Sirohi, R., Upadhyay, S., Mishra, M., Kumar, V., Singh, L. K., & Pandey, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821888-4.00013-7 · Cited by 5
Composites for Hard Tissue Repair
Mustafa, Z., & Tanner, K. E. (2012) · Wiley Encyclopedia of Composites · doi:10.1002/9781118097298.weoc039 · Cited by 3
Self-citationConformational behavior of stereo regular substituted polyglycolides is side chain dependent
Nandel, F. S., & Garla, R. (2011) · Journal of Biophysical Chemistry · doi:10.4236/jbpc.2011.23033 · Cited by 2
“It is because of these reasons, polylactide (PLA) has been explored to a fairly good extent for medical applications [1-16] as rod, plate, screw, fibre, sheet, sponge, beads for bone and tissue engineering [17-20], microsphere for drug delivery system [21] films and foils for wound treatment.”
BackgroundPilon, A. S., Touny, A. H., Lawrence, J. G., & Bhaduri, S. B. (2010) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2010-01-0423 · Cited by 2
Verma, P., Wanchoo, R. K., & Toor, A. P. (2021) · Reaction Chemistry & Engineering · doi:10.1039/d1re00017a · Cited by 2
Pilon, A. S. (2010) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 2
Self-reinforced bioceramic and polylactide based composites
Niemelä, T. (2010) · Tampere University Institutional Repository (Tampere University) · Cited by 2
den Vreken, N. V., Dubruel, P., & Verbeeck, R. M. H. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb00505d · Cited by 1
Polylactide microcapsules and films: preparation and properties
Sawalha, H. (2009) · doi:10.18174/1512 · Cited by 1
Biocomposites and Hybrid Biomaterials Based on CaPO 4
Dorozhkin, S. V. (2016) · Wiley eBooks · doi:10.1002/9783527699315.ch20
Metadata
- Authors
- Bleach, N. C., Tanner, K. E., Kellomäki, M., & Törmälä, P.
- Affiliations
- University of London (GB)
- Tampere University of Technology (FI)
- Venue
- Journal of Materials Science: Materials in Medicine
- Published
- 2001-12
- Volume
- 12
- Issue
- 10-12
- Pages
- 911-915
- ISSN
- 0957-4530 (ISSN-L)
- 1573-4838
- OpenAlex
- W16097078
- Cited by
- 62
- References
- 13
- Citations by year
- 2024: 2 · 2022: 3 · 2021: 2 · 2020: 1 · 2019: 1 · 2018: 1 · 2017: 3 · 2016: 8 · 2015: 3 · 2013: 2 · 2012: 5
- FWCI
- 1.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Journal of Materials Science Materials in Medicine (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
- Keywords
- hydroxyapatite, tricalcium phosphate, bioresorbable polymers, fracture fixation, bone plates, simulated body fluid degradation, water absorption, flexural modulus, yield strength, bioactivity (biomaterials)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.