Indication of Chromium Oxide Hydroxide Evaporation During Oxidation of 304L at 873 K in the Presence of 10% Water Vapor

The Effect of Oxide Volatilization on the Oxidation Kinetics of Cr and Fe-Cr Alloys

Tedmon, C. S. (1966) · Journal of The Electrochemical Society · doi:10.1149/1.2424115 · Cited by 505

Thermodynamics of gas phase chromium species: The chromium oxides, the chromium oxyhydroxides, and volatility calculations in waste incineration processes

Ebbinghaus, B. B. (1993) · Combustion and Flame · doi:10.1016/0010-2180(93)90087-j · Cited by 317

Oxidation/Vaporization Kinetics of Cr 2 O 3

Graham, H. C., & Davis, H. H. (1971) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1971.tb12225.x · Cited by 281

Einfluss von wasserdampf und kohlendioxyd auf die oxydation von eisen in sauerstoff bei hohen temperaturen

Rahmel, A., & Tobolski, J. (1965) · Corrosion Science · doi:10.1016/s0010-938x(65)90500-7 · Cited by 248

The Mechanism of the High-Temperature Oxidation of Iron-Chromium Alloys in Water Vapor

Fujii, C. T., & Meussner, R. A. (1964) · Journal of The Electrochemical Society · doi:10.1149/1.2425963 · Cited by 223

High-temperature oxidation of Fe-Cr alloys in wet oxygen

Jianian, S., Longjiang, Z., & Tiefan, L. (1997) · Oxidation of Metals · doi:10.1007/bf01670507 · Cited by 197

High temperature oxidation of Fe13CrxAl alloys in vapour mixtures

Kvernes, I. A., Oliveira, M. I. L. L., & Kofstad, P. (1977) · Corrosion Science · doi:10.1016/0010-938x(77)90049-x · Cited by 167

Oxidative Vaporization Kinetics of Cr[sub 2]O[sub 3] in Oxygen from 1000° to 1300°C

STEARNS, C. A., Kohl, F. J., & FRYBURG, G. C. (1974) · Journal of The Electrochemical Society · doi:10.1149/1.2401958 · Cited by 85

Invited Review Paper in Commemoration of Over 50 Years of Oxidation of Metals: Addressing the Role of Water Vapor on Long-Term Stainless Steel Oxidation Behavior

Pint, B. A. (2021) · Oxidation of Metals · doi:10.1007/s11085-020-10012-9 · Cited by 30

Study of oxyhydroxides formation on P91 ferritic steel and slurry coated by Al in contact with Ar+80%H2O at 650 °C by TG-Mass spectrometry

Pérez, F. J., & Castañeda, S. I. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.11.029 · Cited by 30

The Effect of H2 and H2O on the Oxidation of 304L-Stainless Steel at 600 °C: General Behaviour (Part I)

Hooshyar, H., Jonsson, T., Hall, J., Svensson, J.-E., Johansson, L., & Liske, J. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9597-5 · Cited by 30

Structure, bonding and redox properties of scandium oxide clusters, a model study

Johnson, J. R. T., & Panas, I. (1999) · Chemical Physics · doi:10.1016/s0301-0104(99)00249-9 · Cited by 30

Oxidation of a novel CeO2-dispersion-strengthened chromium coating in simulated coal-combustion gases

Yan, J., Peng, X., & Wang, F. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.04.030 · Cited by 29

Corrosion behavior of metals or alloys with a solid NaCl deposit in wet oxygen at medium temperature

Liu, L., Li, Y., & Wang, F. (2011) · Science China Technological Sciences · doi:10.1007/s11431-011-4675-7 · Cited by 29

Creep behavior of pack cementation aluminide coatings on Grade 91 ferritic–martensitic alloy

Bates, B. L., Zhang, Y., Dryepondt, S. N., & Pint, B. A. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.12.008 · Cited by 27

Wet oxidation of stainless steels: New insights into hydrogen ingress

Brady, M. P., Fayek, M., Keiser, J. R., Meyer, H. M., More, K. L., Anovitz, L. M., Wesolowski, D. J., & Cole, D. R. (2011) · Corrosion Science · doi:10.1016/j.corsci.2011.02.011 · Cited by 27

Cyclic oxidation behavior of selected commercial NiCr-alloys for engine exhaust valves in wet air environment between 800 and 950 °C

Romedenne, M., Haynes, A., & Pillai, R. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110817 · Cited by 26

Oxidation behaviour of Ni-base superalloy 617 in simulated Advanced Ultra Supercritical (AUSC) steam

Ghule, B., Sundaresan, C., Ningshen, S., & Raja, V. S. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111503 · Cited by 26

Effect of Grain Refinement on High Temperature Steam Oxidation of an Fecral Alloy

Rittenhouse, J., Luebbe, M., Hoffman, A., Liu, Y., Rebak, R. B., Islamgaliev, R. K., Valiev, R. Z., Jalan, V., & Wen, H. (2023) · Corrosion Science · doi:10.1016/j.corsci.2023.111688 · Cited by 26

Performance testing of iron based thermally sprayed HVOF coatings in a biomass-fired fluidised bed boiler

Oksa, M., Varis, T., & Ruusuvuori, K. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.04.025 · Cited by 26

Oxidation Behavior of ODS Fe?Cr Alloys

Pint, B. A., & Wright, I. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-004-3200-9 · Cited by 26

Investigation on steam oxidation behaviour of TP347H FG Part 1: Exposure at 256 bar

Jianmin, J., Montgomery, M., Larsen, O. H., & Jensen, S. A. (2005) · Materials and Corrosion · doi:10.1002/maco.200403856 · Cited by 26

Breakdown of the protective oxide on 11 % Cr steel at high temperature in the presence of water vapor and oxygen, the influence of chromium vaporization

Segerdahl, K., Svensson, J., Halvarsson, M., Panas, I., & Johansson, L. (2005) · Materials at High Temperatures · doi:10.1179/mht.2005.008 · Cited by 26

Stability of Chromia (Cr2O3)-Based Scales Formed During Corrosion of Austenitic Fe-Cr-Ni Alloys in Flowing Oxygenated Supercritical Water

Mahboubi, S., Jiao, Y., Cook, W., Zheng, W., Guzonas, D. A., Botton, G. A., & Kish, J. R. (2016) · CORROSION · doi:10.5006/1982 · Cited by 26

Oxidation of Stainless Steel in H2O/O2 Environments – Role of Chromium Evaporation

Asteman, H., Segerdahl, K., Svensson, J. E., Johansson, L. G., Halvarsson, M., & Tang, J. E. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.775 · Cited by 26

Real-Time Monitoring of High-Temperature Corrosion in Stainless Steels by Open-Path Laser-Induced Plasma Spectrometry

García, P. L., Vadillo, J. M., & Laserna, J. J. (2004) · Applied Spectroscopy · doi:10.1366/0003702042475538 · Cited by 25

Low-Temperature Carburization of the Ni-base Superalloy IN718: Improvements in Surface Hardness and Crevice Corrosion Resistance

Sharghi-Moshtaghin, R., Kahn, H., Ge, Y., Gu, X., Martin, F. J., Natishan, P. M., Rayne, R. J., Michal, G. M., Ernst, F., & Heuer, A. H. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0299-y · Cited by 25

Oxidation behaviour of Super 304H stainless steel in supercritical water

Li, H., Cao, Q., & Zhu, Z. (2018) · Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control · doi:10.1080/1478422x.2018.1459064 · Cited by 25

Chapter 10 Effects of Water Vapour on Oxidation

Young, J. (2008) · Elsevier's corrosion science series · doi:10.1016/s1875-9491(08)00010-0 · Cited by 25

Surface phase transformation in austenitic stainless steel induced by cyclic oxidation in humidified air

Calmunger, M., Eriksson, R., Chai, G., Johansson, S., & Moverare, J. J. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.08.030 · Cited by 25

Corrosion of Alloy 617 in high-temperature gas environments

Yeh, T., Chang, H.-P., Wang, M., Yuan, T., & Kai, J. (2013) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2013.11.045 · Cited by 25

Time and Temperature Effects on Alkali Chloride Induced High Temperature Corrosion of Superheaters during Biomass Firing

Okoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b01232 · Cited by 24

CrO2(OH)2 volatilization rate and oxidation behavior prediction of the NiCr coating in air-H2O environment at 650 ℃

Huang, W., Huang, T., Song, P. Y., Chen, R., Zheng, B., Wang, C., Li, C., & Lu, J. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109303 · Cited by 24

Secondary corrosion protection of FeCr(Al) model alloys at 600 °C – The influence of Cr and Al after breakaway corrosion

Eklund, J., Persdotter, A., Hanif, I., Bigdeli, S., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109584 · Cited by 23

A Nanoscale Study of Thermally Grown Chromia on High-Cr Ferritic Steels and Associated Oxidation Mechanisms

Vayyala, A., Povstugar, I., Naumenko, D., Quadakkers, W. J., Hattendorf, H., & Mayer, J. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7d2e · Cited by 23

KCl‐induced high temperature corrosion of selected commercial alloys

Kiamehr, S., Dahl, K. V., Montgomery, M., & Somers, M. A. J. (2015) · Materials and Corrosion · doi:10.1002/maco.201408215 · Cited by 23

Exploring the Effect of Silicon on the High Temperature Corrosion of Lean FeCrAl Alloys in Humid Air

Sand, T., Edgren, A., Geers, C., Asokan, V., Eklund, J., Helander, T., Svensson, J., & Johansson, L.-G. (2021) · Oxidation of Metals · doi:10.1007/s11085-020-10019-2 · Cited by 23

Investigation of the Evolution of the Oxide Scale Formed on 310 Stainless Steel Oxidized at 600 °C in Oxygen with 40% Water Vapour Using FIB and TEM

Liu, F., Tang, J. E., Asteman, H., Svensson, J.-E., Johansson, L.-G., & Halvarsson, M. (2008) · Oxidation of Metals · doi:10.1007/s11085-008-9130-1 · Cited by 23

Oxidation of stainless steel under dry and aqueous conditions: oxidation behaviour and composition

Wambach, J., Wokaun, A. J., & Hiltpold, A. (2002) · Surface and Interface Analysis · doi:10.1002/sia.1275 · Cited by 23

High Temperature Corrosion of Alumina-forming Iron, Nickel and Cobalt-base Alloys

Pint, B. A. (2009) · Elsevier eBooks · doi:10.1016/b978-044452787-5.00077-9 · Cited by 23

Comparison of the combined oxidation and sulphidation behavior of nickel- and cobalt-based alloys at high temperature

Mapelli, C., Casalino, C., Strada, A., Gruttadauria, A., Barella, S., Mombelli, D., Longaretti, E., & Perego, F. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.11.009 · Cited by 22

Study by Means of the Mass Spectrometry of Volatile Species in the Oxidation of Cr, Cr2O3, Al, Al2O3, Si, SiO2, Fe and Ferritic/Martensitic Steel Samples at 923 K in Ar+(10 to 80%)H2O Vapor Atmosphere for New-Materials Design

Pérez, F. J., & Castañeda, S. I. (2006) · Oxidation of Metals · doi:10.1007/s11085-006-9031-0 · Cited by 22

The influence of Si on the primary protection of lean FeCrAl model alloys in O2 and O2+H2O at 600 °C—A microstructural investigation

Asokan, V., Eklund, J., Bigdeli, S., & Jonsson, T. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.109155 · Cited by 22

Temperature and gas composition dependence of internal oxidation kinetics of an Fe10%Cr alloy in water vapour containing environments

Zurek, J., Meier, G. H., Wessel, E., Singheiser, L., & Quadakkers, W. J. (2011) · Materials and Corrosion · doi:10.1002/maco.201005865 · Cited by 22

Multitechnique characterisation of 304L surface states oxidised at high temperature in steam and air atmospheres

Mamède, A.-S., Nuns, N., Cristol, A.-L., Cantrel, L., Souvi, S., Cristol, S., & Paul, J. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.01.185 · Cited by 22

Influence of Water Vapor on the Cyclic-Oxidation Behavior of a Low-Pressure Plasma-Sprayed NiCrAlY Coating

Zhou, C., Xu, H., & Gong, S. (2004) · Oxidation of Metals · doi:10.1007/s11085-004-7807-7 · Cited by 21

Kinetics of volatilization of high temperature corrosion products and its application to chlorine corrosion

Rammer, B., & Galetz, M. C. (2016) · Materials and Corrosion · doi:10.1002/maco.201608841 · Cited by 21

Role of Nitrogen Uptake During the Oxidation of 304L and 904L Austenitic Stainless Steels

Cao, Y. J., & Norell, M. (2013) · Oxidation of Metals · doi:10.1007/s11085-013-9391-1 · Cited by 21

Investigation of overheating of the final super-heater in a 660MW power plant

Liang, Z., Jin, X., & Zhao, Q. (2014) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2014.06.022 · Cited by 21

Early Stage Oxidation Initiation at Different Grain Boundaries of fcc Fe–Cr Binary Alloy: A Computational Chemistry Study

Das, N. K., & Shoji, T. (2013) · Oxidation of Metals · doi:10.1007/s11085-013-9366-2 · Cited by 21

Effect of Pressure on High-Temperature Oxidation of Ni Alloys in Supercritical Co2 Containing ImpuritiesPreprint

Oleksak, R. P., Carney, C., & Doğan, Ö. N. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4303683 · Cited by 21

Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys

Gorr, B., Burk, S., Depka, T., Somsen, C., Samra, H. A., Christ, H., & Eggeler, G. (2012) · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · doi:10.3139/146.110626 · Cited by 20

Effects of surface deformation on the oxidation behavior of INCONEL 740 superalloy in humid air

Abbasi, M., Kim, B., Kim, D., & Jung, W.-S. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.057 · Cited by 20

Nano-crystalline coating to improve cyclic oxidation resistance of 304 stainless steel

Zhang, J., Xiao, P., Young, D. J., & Wang, F. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.12.007 · Cited by 20

Deposition of Manganese and Cobalt on Ferritic–Martensitic Steels via Pack Cementation Process

Schmidt, D., Galetz, M. C., & Schütze, M. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9340-4 · Cited by 20

TG–mass spectrometry studies in coating design for supercritical steam turbines

Pérez, F. J., & Castañeda, S. I. (2008) · Materials and Corrosion · doi:10.1002/maco.200804123 · Cited by 19

Microstructural investigation of the KCl-induced corrosion of the austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C

Proff, C., Jonsson, T., Pettersson, C., Svensson, J. E., Johansson, L.-G., & Halvarsson, M. (2009) · Materials at High Temperatures · doi:10.3184/096034009x464339 · Cited by 19

High Temperature Oxidation of Newly Developed Alloy 282 in the Flowing-Air and Steam Condition at 900–1100 °C

Liang, Z., Singh, P. M., Zhao, Q., & Wang, Y. (2015) · Oxidation of Metals · doi:10.1007/s11085-015-9555-2 · Cited by 19

Study of Oxyhydroxides Formation on P91 Ferritic Steel and CVD-FBR Coated by Al in Contact with Ar + 40% H2O at 650 °C by TG-Mass Spectrometry

Castañeda, S. I., Bolívar, F. J., & Pérez, F. J. (2010) · Oxidation of Metals · doi:10.1007/s11085-010-9200-z · Cited by 19

Effects of Water Vapour on Oxidation

Young, D. J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100101-1.00011-x · Cited by 19

Steam Oxidation of Austenitic Heat-Resistant Steels TP347H and TP347HFG at 650–800 °C

Liang, Z., & Zhao, Q. (2019) · Materials · doi:10.3390/ma12040577 · Cited by 20

Impact of Alkalis and Chlorides from Sugarcane Agriculture Residues on High Temperature Corrosion: A Review

Lariot-Sánchez, C., Gutierrez, A. R., Rodríguez–Machín, L., Rubio-González, A., & Quintero, P. J. I. (2022) · Oxidation of Metals · doi:10.1007/s11085-022-10102-w · Cited by 18

A Comparison of the Oxidation and Nitridation Properties of Selected Chromia- and Alumina-Forming Alloys at 800 °C

Sand, T., Liske, J., Helander, T., Svensson, J.-E., & Johansson, L. (2022) · Oxidation of Metals · doi:10.1007/s11085-022-10117-3 · Cited by 18

Oxidation behavior analysis of a ferritic ODS steel in supercritical Water

Zhao, Q., Qiao, Z., Dong, J. H., Yu, L., Liu, C., & Wang, H. (2020) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2020.111991 · Cited by 18

TDS Measurement of Hydrogen Released from Stainless Steel Oxidized in H2O-Containing Atmospheres

Yamauchi, A., Yamauchi, Y., HIROHATA, Y., Hino, T., & Kurokawa, K. (2006) · Materials science forum · doi:10.4028/www.scientific.net/msf.522-523.163 · Cited by 18

Field studies of steam oxidation behavior of austenitic heat-resistant steel 10Cr18Ni9Cu3NbN

Liang, Z., Zhao, Q., Singh, P. M., Wang, Y., Li, Y., & Wang, Y. (2015) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2015.02.019 · Cited by 18

Comparison of Short-Term Oxidation Behavior of Model and Commercial Chromia-Forming Ferritic Stainless Steels in Dry and Wet Air

Brady, M. P., Keiser, J. R., More, K. L., Fayek, M., Walker, L. R., Peascoe‐Meisner, R. A., Anovitz, L. M., Wesolowski, D. J., & Cole, D. R. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9289-3 · Cited by 17

Effect of flue gas composition on deposit induced high temperature corrosion under laboratory conditions mimicking biomass firing. Part II: Exposures in SO2 containing atmospheres

Okoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F., & Pantleon, K. (2016) · Materials and Corrosion · doi:10.1002/maco.201609174 · Cited by 17

High‐Temperature Oxidation

Sequeira, C. A. C. (2011) · Wiley eBooks · doi:10.1002/9780470872864.ch20 · Cited by 17

Corrosion performance of candidate boiler tube alloys under advanced pressurized oxy-fuel combustion conditions

Li, K., Zeng, Y., & Luo, J. (2020) · Energy · doi:10.1016/j.energy.2020.119178 · Cited by 17

Effect of Water Vapor on Lifetime of 625 and 120 Foils During Oxidation Between 650 and 800 °C

Romedenne, M., Pillai, R., Dryepondt, S. N., & Pint, B. A. (2021) · Oxidation of Metals · doi:10.1007/s11085-021-10069-0 · Cited by 17

Effect of water vapour on cyclic oxidation of Fe–Cr alloys

Othman, N. K., Zhang, J., & Young, D. J. (2011) · Materials and Corrosion · doi:10.1002/maco.201005866 · Cited by 17

The high temperature oxidation of 11% chromium steel: Part II - Influence of flow rate

Segerdahl, K., Svensson, J., & Johansson, L. (2002) · Materials and Corrosion · doi:10.1002/1521-4176(200207)53:7 · Cited by 19

Influence of temperature on the oxidation behavior of an austenitic steel in deaerated supercritical water

Zhang, N., Zhu, Z., Cao, Q., Gui, J., & Xu, H. J. (2017) · Materials and Corrosion · doi:10.1002/maco.201709705 · Cited by 16

Composition, Structure, and Properties of Corrosion Layers on Ferritic and Austenitic Steels in Ultrasupercritical Water

Betova, I. G., Bojinov, M. S., Kinnunen, P., Lehtovuori, V., Peltonen, S., Penttilä, S., & Saario, T. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2337166 · Cited by 16

High-Temperature Corrosion

Popov, B. N. (2015) · Elsevier eBooks · doi:10.1016/b978-0-444-62722-3.00011-2 · Cited by 16

Oxide scale formation and subsurface phase transformations during long‐term steam exposure of the cobalt base alloy 25

Garcia-Fresnillo, L., Chyrkin, A., Hüttel, T., Böhme, C., Barnikel, J., Grüner, D., Schmitz, F., & Quadakkers, W. J. (2012) · Materials and Corrosion · doi:10.1002/maco.201206683 · Cited by 15

Transient Oxidation Behavior of Fe-5wt.%Al Alloy at 1073 K in Atmospheres Containing Both Oxygen and Water Vapor

Hayashi, S., & Narita, T. (2002) · Oxidation of Metals · doi:10.1023/a:1020106804999 · Cited by 15

Oxide Structures Formed During the High Temperature Oxidation of Hot Mill Work Rolls

Garza-Montes-de-Oca, N. F., Ramírez-Ramírez, J. H., Álvarez-Elcoro, I., Rainforth, W. M., & Colás, R. (2013) · Oxidation of Metals · doi:10.1007/s11085-013-9404-0 · Cited by 15

Laboratory Studies of Potassium-Halide-Induced High-Temperature Corrosion of Superheater Steels. Part 1: Exposures in Dry Air

Wu, H., Yrjas, P., & Hupa, M. M. (2015) · Energy & Fuels · doi:10.1021/ef502245f · Cited by 15

CHAPTER 5 Effect of Water Vapour on the High Temperature Oxidation of Stainless Steels

Chandra-ambhorn, S., Wongpromrat, P., Thublaor, T., & Chandra-ambhorn, W. (2020) · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · doi:10.4028/www.scientific.net/ssp.300.107 · Cited by 14

Corrosion of TP347H FG stainless steel in a biomass fired PF utility boiler

Liu, C., Little, J. A., Henderson, P., & Ljung, P. (2001) · Journal of Materials Science · doi:10.1023/a:1004844411744 · Cited by 15

Ab initio based examination of the kinetics and thermodynamics of oxygen in Fe-Cr alloys

Samin, A. J., Andersson, D. A., Holby, E. F., & Uberuaga, B. P. (2019) · Physical review. B./Physical review. B · doi:10.1103/physrevb.99.174202 · Cited by 14

Study of thermal behavior of CrO3 using TG and DSC

Sajadi, S. A. A., & Khaleghian, M. M. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3597-y · Cited by 14

Is KCl(g) Corrosive at Temperatures Above its Dew Point? Influence of KCl(g) on Initial Stages of the High Temperature Corrosion of 11% Cr Steel at 600°C

Segerdahl, K., Pettersson, J., Svensson, J. E., & Johansson, L. G. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.109 · Cited by 14

Behaviour of alumina-coated 304L steel in a Waste-to-Energy plant

Goutier, F., Valette, S., Vardelle, A. M., & Lefort, P. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.03.054 · Cited by 14

Hydrogen Dissolution into 10% Chromium Ferritic Steels during High-Temperature Steam Oxidation

Nakai, M., Nagai, K., Murata, Y., Morinaga, M., Matsuda, S., & Kanno, M. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.69 · Cited by 14

Tensile strength of directionally solidified chromia-doped sapphire

Cancapa, J. J. Q., de Arellano‐López, A. R., Martínez-Fernández, J., & Sayir, A. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.01.007 · Cited by 14

X-Ray Diffraction to Study the Oxidation Mechanism of Chromium at Elevated Temperatures

Buscail, H., Jacob, Y. P., frederik, S. M., Caudron, É., Cueff, R., Rabaste, F., & Perrier, S. (2004) · Materials science forum · doi:10.4028/www.scientific.net/msf.461-464.93 · Cited by 14

Tailoring oxidation resistance of Super304H by controlling Mn content

Ha, H., Lee, C.-G., Jang, M., Kang, J., Park, J. Y., Lee, T., & Hong, H.-U. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.11.002 · Cited by 13

Small-angle neutron scattering study of the wet and dry high-temperature oxidation of alumina- and chromia-forming stainless steels

Rother, G., Keiser, J. R., Brady, M. P., Unocic, K. A., Anovitz, L. M., Littrell, K. C., Peascoe‐Meisner, R. A., Santella, M. L., Wesolowski, D. J., & Cole, D. R. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.01.024 · Cited by 13

The Role of Oxidation Resistance in High Temperature Alloy Selection for a Future with Green Hydrogen

Pillai, R., & Pint, B. A. (2021) · JOM · doi:10.1007/s11837-021-04972-9 · Cited by 13

Effect of Annealing Atmosphere on Scale Formation and Pickling Performance of 410 SS

Cheng, S.-Y., Juan, C.-T., Kuan, S. L., & Tsai, W. (2003) · Oxidation of Metals · doi:10.1023/a:1027316918546 · Cited by 13

Protective and Nonprotective Behavior of 11% Cr Steel in O[sub 2]+H[sub 2]O Environment at 450-700°C

Segerdahl, K., Svensson, J. E., & Johansson, L. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1753584 · Cited by 13

High-temperature oxidation behavior of 301 stainless steel containing Cu

Wang, X., Yan, H., Li, N., & Jiang, Z. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106121 · Cited by 12

High temperature oxidation behavior of silicon carbide-carbon coated nanostructured ferritic alloy composites in air + water vapor environment

Bawane, K., Ning, K., & Lu, K. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.05.008 · Cited by 12

Microstructure and Volatile Species Determination of Ferritic/Martensitic FB2 Steel in Contact With Ar + 40 %H2O at High Temperatures

Castañeda, S. I., & Pérez, F. J. (2012) · Oxidation of Metals · doi:10.1007/s11085-012-9309-3 · Cited by 12

Oxidation behavior of austenitic steel Sanicro25 and TP347HFG in supercritical water

Zhu, Z., Jiang, D., Cao, Q., Xu, H., Khan, H. I., & Zhang, N. (2019) · Materials and Corrosion · doi:10.1002/maco.201810247 · Cited by 12

The Oxidation of Metal Alloy Foils in the Presence of Water Vapor

Rakowski, J. M. (2004) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.1787508 · Cited by 12

Factors Affecting Corrosion Resistance of Recuperator Alloys

Pint, B. A., & Peraldi, R. (2003) · ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (GT) · doi:10.1115/gt2003-38692 · Cited by 12

Development of the inner oxide zone upon steam oxidation of an austenitic stainless steel

Hansson, A. N., Montgomery, M., & Somers, M. A. J. (2009) · Materials at High Temperatures · doi:10.3184/096034009x400005 · Cited by 11

Oxidation of a novel CeO2‐dispersed chromium coating in wet air

Peng, X., Yan, J., Zheng, L., & Wang, F. (2011) · Materials and Corrosion · doi:10.1002/maco.201005868 · Cited by 11

Long‐Term High‐Temperature Oxidation of Al 10 CoCrFeNi 30 High‐Entropy Alloy

Bastin, A., Robertson, T., Huang, X., & Kearsey, R. (2024) · Advanced Engineering Materials · doi:10.1002/adem.202400650 · Cited by 11

In situ ESEM investigations of the oxide growth on hot work tools steel: effect of the water vapour

Bruckel, P., Lours, P., Lamesle, P., & Pieraggi, B. (2003) · Materials at High Temperatures · doi:10.1179/mht.2003.064 · Cited by 11

Oxidation behavior of a new Fe–Ni–Cr-based alloy in pure steam at 750 °C

Yang, Z., Lu, J. T., Yuan, Y., Zhao, X. B., Gu, Y. F., Yin, H. F., & Dang, Y. Y. (2016) · Materials at High Temperatures · doi:10.1080/09603409.2016.1139336 · Cited by 11

Influencing Factors and Challenges on the Wettability of Electrode in Molten Salt

Kong, R., Su, X., Li, S., Fan, Y., He, J., Jiao, H., & Song, J. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad2c36 · Cited by 10

Effects of Si, Mn, Ti and Ce on oxidation of Fe-Cr alloys in water vapour

Wang, J., Mao, S., Zhang, J., & Young, D. J. (2025) · npj Materials Degradation · doi:10.1038/s41529-025-00641-3 · Cited by 10

Metal Corrosion Screening in a Nitrogen-Based Fuel at High Temperature and Pressure

Dana, A. G., Starostin, M. Y., Shter, G. E., Buk, A., Dinner, O., & Grader, G. S. (2014) · Oxidation of Metals · doi:10.1007/s11085-014-9504-5 · Cited by 10

Evidence for Chromium Evaporation Influencing the Oxidation of 304L: The Effect of Temperature and Flow Rate

Asteman, H., Svensson, J., & Johansson, L. (2002) · Oxidation of Metals · doi:10.1023/a:1014877600235 · Cited by 223

Oxidation of 310 steel in H2O/O2 mixtures at 600 °C: the effect of water-vapour-enhanced chromium evaporation

Asteman, H., Svensson, J.-E., & Johansson, L.-G. (2002) · Corrosion Science · doi:10.1016/s0010-938x(02)00056-2 · Cited by 147

Influence of Water Vapor and Flow Rate on the High-Temperature Oxidation of 304L; Effect of Chromium Oxide Hydroxide Evaporation

Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G. (2000) · Oxidation of Metals · doi:10.1023/a:1004642310974 · Cited by 325

The high temperature oxidation of 11% chromium steel: Part I - Influence of pH2O

Segerdahl, K., Svensson, J., & Johansson, L. G. (2002) · Materials and Corrosion · doi:10.1002/1521-4176(200204)53:4 · Cited by 41

Effect of Chromium and Water Vapor of Low Carbon Steel on Oxidation Behavior at 1050 °C

Li, Z., Cao, G., He, Y., Liu, Z., & Wang, G. (2016) · steel research international · doi:10.1002/srin.201500429 · Cited by 21