CoChat

Fine Ash-Bearing Particles as a Major Aerosol Component in Biomass Burning Smoke

Open access

The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.

Abstract

Biomass burning (BB) events are occurring globally with increasing frequency, and their emissions are having more impacts on human health and climate. Large ash particles are recognized as a BB product with major influences on soil and water environments. However, fine‐ash particles, which have diameters smaller than several microns and characteristic morphologies and compositions (mainly Ca and Mg carbonates), have not yet been explicitly considered as a major BB aerosol component either in field observations or climate models. This study measured BB aerosol samples using transmission electron microscopy (TEM) and ion chromatography during the Fire Influence on Regional to Global Environments and Air Quality (FIREX‐AQ) campaign. We show that significant amounts of fine ash‐bearing particles are transported >100 km from their fire sources. Our environmental chamber experiments suggest that they can act as cloud condensation and ice nuclei. We also found considerable amounts of fine ash‐bearing particles in the TEM samples collected during previous campaigns (Biomass Burning Observation Project and Megacity Initiative: Local and Global Research Observations). These ash particles are commonly mixed with organic matter and make up ∼8% and 5% of BB smoke by number and mass, respectively, in samples collected during the FIREX‐AQ campaign. The measured ash‐mass concentrations are approximately five times and six times greater than those of BB black carbon and potassium, respectively, scaling to an estimated global emission of 11.6 Tg yr−1 with a range of 8.8–16.3 Tg yr−1. Better characterization and constraints on these fine ash‐bearing particles will improve BB aerosol measurements and strengthen assessments of BB impacts on human health and climate.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/2021jd035657

Cites

74 of 74 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic of the emission of ash-bearing particles and their number fractions. The wildfire picture was taken from the Shady fire on July 25, 2019, with the forward camera onboard the NASA DC-8 during the FIREX-AQ campaign. The smoke top was ∼ 5 km above mean sea level. In the pie chart, the aerosol particle number fractions are average values for the FIREX-AQ BB samples measured using TEM. Images of ash-bearing particles were taken from the samples collected on July 25 (left) and August 23 (center and right). The biomass bottom ash particle was obtained from a pine ash sample. See Figures S1-S3, S6, and S7 in Supporting Information S1 for a comprehensive data set of the images and number fractions.
Figure 1 Schematic of the emission of ash-bearing particles and their number fractions. The wildfire picture was taken from the Shady fire on July 25, 2019, with the forward camera onboard the NASA DC-8 during the FIREX-AQ campaign. The smoke top was ∼ 5 km above mean sea level. In the pie chart, the aerosol particle number fractions are average values for the FIREX-AQ BB samples measured using TEM. Images of ash-bearing particles were taken from the samples collected on July 25 (left) and August 23 (center and right). The biomass bottom ash particle was obtained from a pine ash sample. See Figures S1-S3, S6, and S7 in Supporting Information S1 for a comprehensive data set of the images and number fractions.CC-BY-NC · From the PDF
Image 2
CC-BY-NC · From the PDF
Figure 2 Flow chart for classifying individual particles into six categories based on STEM-EDS measurements.
Figure 2 Flow chart for classifying individual particles into six categories based on STEM-EDS measurements.CC-BY-NC · From the PDF
Image 4
CC-BY-NC · From the PDF
Figure 3 Example of a TEM image and elemental mappings of C, O, S, Ca, Mg, P, Si, Al, and K. The sample was collected from the Sheridan fire (August 17, 2019, 02:18 UTC) during the FIREX-AQ campaign. The ash-bearing particle number fraction of this sample is relatively high (42%). Ash components mainly consist of Ca, Mg, P, C, and O. Organic materials mainly contain C and O. Particles generally consist of several components, including ash and organic materials.
Figure 3 Example of a TEM image and elemental mappings of C, O, S, Ca, Mg, P, Si, Al, and K. The sample was collected from the Sheridan fire (August 17, 2019, 02:18 UTC) during the FIREX-AQ campaign. The ash-bearing particle number fraction of this sample is relatively high (42%). Ash components mainly consist of Ca, Mg, P, C, and O. Organic materials mainly contain C and O. Particles generally consist of several components, including ash and organic materials.CC-BY-NC · From the PDF
Figure 4 TEM image and elemental distributions of ash-bearing particles. Left: An ash-bearing particle collected on a lacey-carbon substrate from the FIREX-AQ campaign on July 25 at 22:47. The C mapping image has enhanced contrast to show C in the ash-bearing particle, which has less C than the substrate and organic matter. Middle: An ash-bearing particle collected during the BBOP campaign on August 21, 2013. Right: An ash-bearing particle collected during the MILAGRO campaign on March 27, 2006.
Figure 4 TEM image and elemental distributions of ash-bearing particles. Left: An ash-bearing particle collected on a lacey-carbon substrate from the FIREX-AQ campaign on July 25 at 22:47. The C mapping image has enhanced contrast to show C in the ash-bearing particle, which has less C than the substrate and organic matter. Middle: An ash-bearing particle collected during the BBOP campaign on August 21, 2013. Right: An ash-bearing particle collected during the MILAGRO campaign on March 27, 2006.CC-BY-NC · From the PDF
Image 7
CC-BY-NC · From the PDF
Figure 5 Example of a TEM image and elemental distributions for a laboratory-generated pine ash particle. A piece of pine branch was heated in a furnace at 500°C with air, turning it completely into ash. The biomass bottom ash particles were placed on a TEM grid.
Figure 5 Example of a TEM image and elemental distributions for a laboratory-generated pine ash particle. A piece of pine branch was heated in a furnace at 500°C with air, turning it completely into ash. The biomass bottom ash particles were placed on a TEM grid.CC-BY-NC · From the PDF
Image 9
CC-BY-NC · From the PDF
Image 10
CC-BY-NC · From the PDF
Figure 8 Number fractions of aerosol particles collected during the MILAGRO campaign. (a) Size-dependent number fractions (left scales). Right scale: normalized size distributions of all particles (white lines) and ash-bearing particles (black lines). (b) The averaged number fractions. Although the fractions of K-bearing particles were higher than those of carbonaceous particles, K-bearing particles were mostly mixed with organic materials (e.g., Figure S5 in Supporting Information S1), which are likely dominant in mass fractions. The particle number is 2,608. The size bins are <0.32, 0.32-0.40, 0.40-0.50, 0.50-0.63, 0.63-0.79, 0.79-1.00, 1.00-1.26, 1.26-1.58, 1.58-2.00, and >2.00 μm.
Figure 8 Number fractions of aerosol particles collected during the MILAGRO campaign. (a) Size-dependent number fractions (left scales). Right scale: normalized size distributions of all particles (white lines) and ash-bearing particles (black lines). (b) The averaged number fractions. Although the fractions of K-bearing particles were higher than those of carbonaceous particles, K-bearing particles were mostly mixed with organic materials (e.g., Figure S5 in Supporting Information S1), which are likely dominant in mass fractions. The particle number is 2,608. The size bins are <0.32, 0.32-0.40, 0.40-0.50, 0.50-0.63, 0.63-0.79, 0.79-1.00, 1.00-1.26, 1.26-1.58, 1.58-2.00, and >2.00 μm.CC-BY-NC · From the PDF
Image 12
CC-BY-NC · From the PDF
Figure 9 Average abundances of ash-bearing particles for the nine flights taken during the FIREX-AQ campaign. (a) Number fractions of ash-bearing particles determined by using TEM. (b) Fine ash mass concentrations (<4.1 μm) measured by IC. (c) Fine ash mass relative to PM 1 measured by an AMS (%). (d) Fine ash mass relative to BC mass from SP2 data. The ash mass was determined from the sum of the masses of Mg 2+ and Ca 2+ by assuming that they were carbonate. Agricultural burning samples were collected during the September 3 flight (F0903). The samples collected outside of visible plumes at low CO and particle concentrations were defined as background (BG) air samples, although some of these may be slightly influenced by dilute regional haze of aged smoke. The average values of each BB event are shown in each panel. The wide boxes, whiskers, and squares indicate the 25th, 50th, and 75th percentile ranges, 10th-90th percentile ranges, and average values, respectively.
Figure 9 Average abundances of ash-bearing particles for the nine flights taken during the FIREX-AQ campaign. (a) Number fractions of ash-bearing particles determined by using TEM. (b) Fine ash mass concentrations (<4.1 μm) measured by IC. (c) Fine ash mass relative to PM 1 measured by an AMS (%). (d) Fine ash mass relative to BC mass from SP2 data. The ash mass was determined from the sum of the masses of Mg 2+ and Ca 2+ by assuming that they were carbonate. Agricultural burning samples were collected during the September 3 flight (F0903). The samples collected outside of visible plumes at low CO and particle concentrations were defined as background (BG) air samples, although some of these may be slightly influenced by dilute regional haze of aged smoke. The average values of each BB event are shown in each panel. The wide boxes, whiskers, and squares indicate the 25th, 50th, and 75th percentile ranges, 10th-90th percentile ranges, and average values, respectively.CC-BY-NC · From the PDF
Image 14
CC-BY-NC · From the PDF
Figure 10 Number fractions of ash-bearing particles from samples obtained during the BBOP, MILAGRO, and FIREX-AQ campaigns (all BB samples, including those from wildfires and agricultural fires). The wide boxes, whiskers, and squares indicate the 25th, 50th, and 75th percentile ranges, 10th-90th percentile ranges, and average values, respectively. The numbers of TEM samples are 15; 15; 15; 14; 59; 10; and 208 from left to right.
Figure 10 Number fractions of ash-bearing particles from samples obtained during the BBOP, MILAGRO, and FIREX-AQ campaigns (all BB samples, including those from wildfires and agricultural fires). The wide boxes, whiskers, and squares indicate the 25th, 50th, and 75th percentile ranges, 10th-90th percentile ranges, and average values, respectively. The numbers of TEM samples are 15; 15; 15; 14; 59; 10; and 208 from left to right.CC-BY-NC · From the PDF
Image 16
CC-BY-NC · From the PDF
Figure 11 Ash-bearing particle number fractions vs. distance from fire sources for wildfire samples obtained during the FIREX-AQ campaign. The physical transport hours are approximately 10 hr for ∼ 200 km and approximately two days for 900 km (maximum). Scales for x - and y -axes differ depending on the flights. Flights from July 25 to August 13 had two or three repeated flight patterns (FP), which are shown using different symbols in each panel. The panel 'All wildfire smoke' uses single symbols for each flight and is shown in a log scale. Uncertainties are reported as 95% confidence intervals.
Figure 11 Ash-bearing particle number fractions vs. distance from fire sources for wildfire samples obtained during the FIREX-AQ campaign. The physical transport hours are approximately 10 hr for ∼ 200 km and approximately two days for 900 km (maximum). Scales for x - and y -axes differ depending on the flights. Flights from July 25 to August 13 had two or three repeated flight patterns (FP), which are shown using different symbols in each panel. The panel 'All wildfire smoke' uses single symbols for each flight and is shown in a log scale. Uncertainties are reported as 95% confidence intervals.CC-BY-NC · From the PDF
Figure 12 Ash-bearing particle number fractions at the median sampling altitude above mean sea level. The altitudes were measured by the DC8 navigation system (https://www-air.larc.nasa.gov/missions/firex-aq/index.html; last access on June 18, 2021). Uncertainties are reported as 95% confidence intervals.
Figure 12 Ash-bearing particle number fractions at the median sampling altitude above mean sea level. The altitudes were measured by the DC8 navigation system (https://www-air.larc.nasa.gov/missions/firex-aq/index.html; last access on June 18, 2021). Uncertainties are reported as 95% confidence intervals.CC-BY-NC · From the PDF
Image 19
CC-BY-NC · From the PDF
Figure 13 Relationship between the weight % and ash-bearing particle number fractions (%) for the FIREX-AQ samples. The insets for Al, Mn, and Fe enlarge the plots with small weight % values. Uncertainties are reported as 95% confidence intervals for 221 TEM samples.
Figure 13 Relationship between the weight % and ash-bearing particle number fractions (%) for the FIREX-AQ samples. The insets for Al, Mn, and Fe enlarge the plots with small weight % values. Uncertainties are reported as 95% confidence intervals for 221 TEM samples.CC-BY-NC · From the PDF
Image 21
CC-BY-NC · From the PDF
Figure 14 Differences of relative ash-bearing particle compositions (weight %) between wildfires and agricultural fires. Ternary plots among Ca, Mg, and P are shown for the three campaigns (wildfires) and the FIREX-AQ agricultural fire. The numbers of ash-bearing particles are 3,865; 183; 240; and 233 for the samples from the FIREX-AQ wildfire, BBOP, MILAGRO, and FIREX-AQ agricultural fire. Gray circles cover the dominant plotted areas.
Figure 14 Differences of relative ash-bearing particle compositions (weight %) between wildfires and agricultural fires. Ternary plots among Ca, Mg, and P are shown for the three campaigns (wildfires) and the FIREX-AQ agricultural fire. The numbers of ash-bearing particles are 3,865; 183; 240; and 233 for the samples from the FIREX-AQ wildfire, BBOP, MILAGRO, and FIREX-AQ agricultural fire. Gray circles cover the dominant plotted areas.CC-BY-NC · From the PDF
Image 23
CC-BY-NC · From the PDF
Figure 15 Changes in ash-bearing particle composition with size for particles collected during the FIREX-AQ campaign. The total number of ash-bearing particles is 4,098. Uncertainties are reported as 95% confidence intervals. Shape factors were obtained from a square of measured perimeters ( P ) from binary STEM images divided by the spherical perimeters that are calculated from the area-equivalent diameters ( d ): ( P /(π d )) 2 . A sphere has a shape factor of 1, and a particle with a complicated shape has a shape factor higher than 1.
Figure 15 Changes in ash-bearing particle composition with size for particles collected during the FIREX-AQ campaign. The total number of ash-bearing particles is 4,098. Uncertainties are reported as 95% confidence intervals. Shape factors were obtained from a square of measured perimeters ( P ) from binary STEM images divided by the spherical perimeters that are calculated from the area-equivalent diameters ( d ): ( P /(π d )) 2 . A sphere has a shape factor of 1, and a particle with a complicated shape has a shape factor higher than 1.CC-BY-NC · From the PDF
Image 25
CC-BY-NC · From the PDF
Figure 16 Hygroscopicity experiments on ash-bearing particles measured using an environmental chamber with an optical microscope. (a-b) TEM image of ash-bearing particles (a) before and (b) after the hygroscopicity experiment. Ash-bearing particles became fragments over the substrate after deliquescence (enlarged TEM images in panel (b)). The TEM image in (a) was taken before the hygroscopicity experiment with low magnifications and a weak beam current density to minimize the electron beam damage. (c and d) Optical microscope images show the changes in particle shapes with increasing RH. The sample was exposed to ∼ 100% relative humidity (RH). These ash-bearing particles deliquesced at RH values between 80% and 89%. Red arrows indicate deliquesced ash-bearing particles. The sample was collected on July 24, 2019, during the FIREX-AQ campaign in coarse particle mode (aerodynamic diameter >700 nm in 50% cutoff size).
Figure 16 Hygroscopicity experiments on ash-bearing particles measured using an environmental chamber with an optical microscope. (a-b) TEM image of ash-bearing particles (a) before and (b) after the hygroscopicity experiment. Ash-bearing particles became fragments over the substrate after deliquescence (enlarged TEM images in panel (b)). The TEM image in (a) was taken before the hygroscopicity experiment with low magnifications and a weak beam current density to minimize the electron beam damage. (c and d) Optical microscope images show the changes in particle shapes with increasing RH. The sample was exposed to ∼ 100% relative humidity (RH). These ash-bearing particles deliquesced at RH values between 80% and 89%. Red arrows indicate deliquesced ash-bearing particles. The sample was collected on July 24, 2019, during the FIREX-AQ campaign in coarse particle mode (aerodynamic diameter >700 nm in 50% cutoff size).CC-BY-NC · From the PDF
Image 27
CC-BY-NC · From the PDF
Figure 18 Relationship between the ion chromatography (IC) and TEM results for each flight average during the FIREXAQ campaign (nine flights). The IC and TEM sampling periods cover the same smoke transects with slightly different start and stop times. Mass fraction (wt %) for each element in the TEM data ( x -axes) was determined by dividing the mass of each element by the sum of all measured elements and is the averaged values of BB samples for each flight. Mass fractions (wt %) of IC data ( y -axes) were obtained from IC mass concentrations divided by the PM 1 mass measured by AMS. Uncertainties for the IC and TEM measurements are reported as 95% confidence intervals.
Figure 18 Relationship between the ion chromatography (IC) and TEM results for each flight average during the FIREXAQ campaign (nine flights). The IC and TEM sampling periods cover the same smoke transects with slightly different start and stop times. Mass fraction (wt %) for each element in the TEM data ( x -axes) was determined by dividing the mass of each element by the sum of all measured elements and is the averaged values of BB samples for each flight. Mass fractions (wt %) of IC data ( y -axes) were obtained from IC mass concentrations divided by the PM 1 mass measured by AMS. Uncertainties for the IC and TEM measurements are reported as 95% confidence intervals.CC-BY-NC · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 74 references

Research works printed but not linked: 3

  1. 10.1080/02786826.2017.1373181 · DOI
  2. 10.5194/acp-20-13319-2020 · DOI
  3. 10.5194/acp-9-5785-2009 · DOI · Paper page

Cited by

See all 63

Metadata

Authors
Adachi, K., Dibb, J. E., Scheuer, E., Katich, J. M., Schwarz, J. P., Perring, A. E., Mediavilla, B., Guo, H., Campuzano‐Jost, P., Jimenez, J. L., Crawford, J., Soja, A. J., Oshima, N., Kajino, M., Kinase, T., Kleinman, L., Sedlacek, A. J., Yokelson, R. J., & Buseck, P. R.
Affiliations
  • Meteorological Research Institute (JP)
  • University of New Hampshire (US)
  • National Oceanic and Atmospheric Administration (US)
  • Cooperative Institute for Research in Environmental Sciences (US)
  • Colgate University (US)
  • Langley Research Center (US)
  • Japan Agency for Marine-Earth Science and Technology (JP)
  • Brookhaven National Laboratory (US)
  • University of Montana (US)
  • Arizona State University (US)
Corresponding author
Adachi, Kouji
Venue
Journal of Geophysical Research: Atmospheres
Published
2022-01-18
Volume
127
Issue
2
ISSN
  • 0148-0227 (ISSN-L)
  • 2169-897X
  • 2169-8996
OpenAlex
W4206441290
Cited by
55
References
74
Citations by year
2026: 8 · 2025: 4 · 2024: 20 · 2023: 7 · 2022: 16
FWCI
4.49
Type
journal article
Language
en
Open access
Locations
  • Journal of Geophysical Research Atmospheres (publishedVersion, cc-by-nc)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
  • University of New Hampshire Scholars Repository (University of New Hampshire at Manchester) (submittedVersion, cc-by-nc)
  • NOAA Institutional Repository (submittedVersion, cc-by-nc)
Funders
  • Environmental Restoration and Conservation Agency (JPMEERF20202003, JPMEERF20205001, JPMEERF20172003, JPMEERF20165005, JPMEERF20215003)
  • Japan Society for the Promotion of Science (JP16K16188, JP18H03363, JP18H05292, JP19H01972, JP19H04236, JP19K21905, JP19H04259)
  • Earth Sciences Division (80NSSC19K0124, 80NSSC18K0630, 80NSSC18K0631, NA16OAR4310100)
Topics
  • Physical Sciences › Earth and Planetary Sciences › Atmospheric Science › Atmospheric chemistry and aerosols
  • Physical Sciences › Environmental Science › Global and Planetary Change › Atmospheric aerosols and clouds
  • Physical Sciences › Environmental Science › Global and Planetary Change › Fire effects on ecosystems
Keywords
biomass burning aerosols, calcium carbonate, magnesium carbonate, long-range transport, cloud condensation nuclei, ice nuclei, black carbon, global emission estimates, FIREX-AQ

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fine Ash-Bearing Particles as a Major Aerosol Component in Biomass Burning Smoke. https://app.cochat.ai/papers/10.1029/2021jd035657
The paper
Adachi, K., Dibb, J. E., Scheuer, E., Katich, J. M., Schwarz, J. P., Perring, A. E., Mediavilla, B., Guo, H., Campuzano‐Jost, P., Jimenez, J. L., Crawford, J., Soja, A. J., Oshima, N., Kajino, M., Kinase, T., Kleinman, L., Sedlacek, A. J., Yokelson, R. J., & Buseck, P. R. (2022). Fine Ash-Bearing Particles as a Major Aerosol Component in Biomass Burning Smoke. Journal of Geophysical Research: Atmospheres. https://doi.org/10.1029/2021jd035657

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.