CoChat

The DOI matches its Crossref record; 42 of the 43 references it cites were found in a registry or an index.

Quantifying the Efficiency of Stratospheric Aerosol Geoengineering at Different Altitudes

Open access

Abstract

Stratospheric aerosol injection (SAI) of reflective sulfate aerosols has been proposed to temporarily reduce the impacts of global warming. In this study, we compare two SAI simulations which inject at different altitudes to provide the same amount of cooling, finding that lower‐altitude SAI requires 64% more injection. SAI at higher altitudes cools the surface more efficiently per unit injection than lower‐altitude SAI through two primary mechanisms: the longer lifetimes of SO 2 and SO 4 at higher altitudes, and the water vapor feedback, in which lower‐altitude SAI causes more heating in the tropical cold point tropopause region, thereby increasing water vapor transport into the stratosphere and trapping more terrestrial infrared radiation that offsets some of the direct aerosol‐induced cooling. We isolate these individual mechanisms and find that the contribution of lifetime effects to differences in cooling efficiency is approximately five to six times larger than the contribution of the water vapor feedback.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/2023gl104417

Cites

42 of 43 references verified0 citation errors · 1 not checkable

Statistics

Figures

Figure 1 SO2 injection rates and surface temperature. Panel (a) plots the total injection rates necessary in each year to maintain the desired temperature goals; faint lines denote individual ensemble members, while thick lines denote ensemble averages. Panels (b and c) plot how the total quantity injected each year is distributed across the four injection latitudes (30°N, 15°N, 15°S, and 30°S) for iLOW and iHIGH ensemble averages, respectively. Panel (d) plots annually-averaged, global mean surface temperature for iHIGH, iLOW, and RCP8.5; thick lines denote ensemble averages, while thin lines denote individual ensemble members. Panels (e and g) plot differences in surface temperature for iHIGH (2070-2089), iLOW (2070-2089), and the reference period (RCP8.5, 2010-2030); panel e plots iLOW minus the reference period, panel (f) plots iHIGH minus the reference period, and panel g plots iHIGH minus iLOW. Shading denotes regions with no significant difference according to the two-sample t -test at the 95% confidence level.
Figure 1 SO2 injection rates and surface temperature. Panel (a) plots the total injection rates necessary in each year to maintain the desired temperature goals; faint lines denote individual ensemble members, while thick lines denote ensemble averages. Panels (b and c) plot how the total quantity injected each year is distributed across the four injection latitudes (30°N, 15°N, 15°S, and 30°S) for iLOW and iHIGH ensemble averages, respectively. Panel (d) plots annually-averaged, global mean surface temperature for iHIGH, iLOW, and RCP8.5; thick lines denote ensemble averages, while thin lines denote individual ensemble members. Panels (e and g) plot differences in surface temperature for iHIGH (2070-2089), iLOW (2070-2089), and the reference period (RCP8.5, 2010-2030); panel e plots iLOW minus the reference period, panel (f) plots iHIGH minus the reference period, and panel g plots iHIGH minus iLOW. Shading denotes regions with no significant difference according to the two-sample t -test at the 95% confidence level.CC-BY · From the PDF
Image 2
CC-BY · From the PDF
Figure 2 Sulfate burden and aerosol optical depth (AOD) per unit injection. Panels (a and b) plot changes to atmospheric SO 4 mixing ratio for iHIGH and iLOW (2070-2089), respectively, relative to the reference period (RCP8.5, 2010-2030). Black dots denote injection locations; the solid black line denotes the location of the tropopause in that simulation. Panel (c) plots changes to globally integrated sulfur column burden (iHIGH and iLOW 2070-2089 minus RCP8.5 2070-2089) as a function of injected sulfur; each point is 1 year of data. Black lines denote lines of best fit constrained through the origin; the slope of the line denotes sulfur lifetime in years, displayed as text next to each line. Panel (d) plots zonal mean day-night stratospheric 550 nm AOD divided by SO 2 injection rate for iHIGH and iLOW (2070-2089); shading denotes ensemble spread.
Figure 2 Sulfate burden and aerosol optical depth (AOD) per unit injection. Panels (a and b) plot changes to atmospheric SO 4 mixing ratio for iHIGH and iLOW (2070-2089), respectively, relative to the reference period (RCP8.5, 2010-2030). Black dots denote injection locations; the solid black line denotes the location of the tropopause in that simulation. Panel (c) plots changes to globally integrated sulfur column burden (iHIGH and iLOW 2070-2089 minus RCP8.5 2070-2089) as a function of injected sulfur; each point is 1 year of data. Black lines denote lines of best fit constrained through the origin; the slope of the line denotes sulfur lifetime in years, displayed as text next to each line. Panel (d) plots zonal mean day-night stratospheric 550 nm AOD divided by SO 2 injection rate for iHIGH and iLOW (2070-2089); shading denotes ensemble spread.CC-BY · From the PDF
Image 4
CC-BY · From the PDF
Figure 3 Air temperature and the tropopause. Panels (a and b) plot differences in zonally-averaged air temperature for iHIGH and iLOW (2070-2089), respectively, relative to the reference period (RCP8.5 2010-2030). Shading indicates regions with no significant difference according to the two-sample t -test at the 95% confidence level; the solid black line denotes the ensemble mean tropopause. Panel (c) plots average, area-weighted air temperature between 20°N and 20°S as a function of altitude for iHIGH and iLOW (2070-2089) and the RCP8.5 reference period (2010-2030). Panels (d and e) plot tropopause pressure altitude and cold-point temperature, respectively (area-weighted between 20°N and 20°S) over time for the ensemble averages of iHIGH, iLOW, and RCP8.5; faint lines denote individual ensemble members, and thick lines denote ensemble averages.
Figure 3 Air temperature and the tropopause. Panels (a and b) plot differences in zonally-averaged air temperature for iHIGH and iLOW (2070-2089), respectively, relative to the reference period (RCP8.5 2010-2030). Shading indicates regions with no significant difference according to the two-sample t -test at the 95% confidence level; the solid black line denotes the ensemble mean tropopause. Panel (c) plots average, area-weighted air temperature between 20°N and 20°S as a function of altitude for iHIGH and iLOW (2070-2089) and the RCP8.5 reference period (2010-2030). Panels (d and e) plot tropopause pressure altitude and cold-point temperature, respectively (area-weighted between 20°N and 20°S) over time for the ensemble averages of iHIGH, iLOW, and RCP8.5; faint lines denote individual ensemble members, and thick lines denote ensemble averages.CC-BY · From the PDF
Image 6
CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Figure 5 Differences in aerosol optical depth (AOD) per Tg SO 2 injection (a) and cooling per unit 0.1 AOD (b), which contribute to increased injection for iLOW relative to iHIGH. Shading denotes ensemble spread. Panel (c) shows the relative sizes of the increased AOD per Tg SO 2 injection (green) and increased cooling per 0.1 AOD (yellow) for iHIGH relative to iLOW.
Figure 5 Differences in aerosol optical depth (AOD) per Tg SO 2 injection (a) and cooling per unit 0.1 AOD (b), which contribute to increased injection for iLOW relative to iHIGH. Shading denotes ensemble spread. Panel (c) shows the relative sizes of the increased AOD per Tg SO 2 injection (green) and increased cooling per 0.1 AOD (yellow) for iHIGH relative to iLOW.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 38 references

Cited by

See all 40

Metadata

Authors
Lee, W. R., Visioni, D., Bednarz, E. M., MacMartin, D. G., Kravitz, B., & Tilmes, S.
Affiliations
  • Cornell University (US)
  • NSF National Center for Atmospheric Research (US)
  • Cooperative Institute for Research in Environmental Sciences (US)
  • Pacific Northwest National Laboratory (US)
Corresponding author
Lee, Walker R.
Venue
Geophysical Research Letters
Published
2023-07-20
Volume
50
Issue
14
ISSN
  • 0094-8276 (ISSN-L)
  • 1944-8007
OpenAlex
W4385067522
Cited by
33
References
38
Citations by year
2026: 7 · 2025: 11 · 2024: 15
FWCI
3.71
Type
journal article
Language
en
Open access
Locations
  • Geophysical Research Letters (publishedVersion, cc-by)
  • CU Scholar (University of Colorado Boulder) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • NOAA Institutional Repository (submittedVersion, cc-by)
Funders
  • National Science Foundation (CBET‐2038246, SES‐1754740, 1852977)
  • National Oceanic and Atmospheric Administration (NA22OAR4320151)
Topics
  • Physical Sciences › Environmental Science › Global and Planetary Change › Climate Change and Geoengineering
  • Physical Sciences › Environmental Science › Global and Planetary Change › Atmospheric aerosols and clouds
  • Physical Sciences › Earth and Planetary Sciences › Atmospheric Science › Atmospheric Ozone and Climate
Keywords
stratospheric aerosol injection, geoengineering, sulfate aerosols, cooling efficiency, aerosol lifetime, water vapor feedback, climate change mitigation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Quantifying the Efficiency of Stratospheric Aerosol Geoengineering at Different Altitudes. https://app.cochat.ai/papers/10.1029/2023gl104417
The paper
Lee, W. R., Visioni, D., Bednarz, E. M., MacMartin, D. G., Kravitz, B., & Tilmes, S. (2023). Quantifying the Efficiency of Stratospheric Aerosol Geoengineering at Different Altitudes. Geophysical Research Letters. https://doi.org/10.1029/2023gl104417

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.