Thermal infrared emission spectroscopy of natural surfaces: Application to desert varnish coatings on rocks
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Thermal infrared Spectroscopy has become an increasingly important tool for remote compositional analysis and geologic mapping. Most published laboratory measurements have been obtained in bidirectional reflection or transmission, whereas remotely sensed thermal infrared data are obtained by measuring the emitted energy. Section 2 of this paper describes a laboratory technique for determining calibrated emissivities of natural surfaces. Equations are developed to account for the energy reflected from the environment and to determine directly the sample temperature from measurements of hot and cold blackbody targets. Two methods for determining emissivity are developed: one in which only a hot sample measurement is made and the reflected background energy is removed by modeling, and a second in which the sample is cooled and the reflected energy is measured directly. Relative emissivity can be obtained to approximately 1% and absolute emissivities can be obtained to 2–15%, depending on the validity of the assumption that the emissivity of the sample is unity at some wavelength. The emission data agree well with the hemispherically integrated reflection data but point out problems associated with bidirectional reflectance measurements. Section 3 applies emissivity measurements to the study of layered surfaces consisting of desert varnish coatings on granite and granodiorite rock suites. Two linear models are developed: the first assumes linear mixing of independent emission from the substrate and varnish (checkerboard model); the second models transmission through an absorbing/emitting medium. Regardless of whether the varnish is or is not relatively transparent and strongly absorptive, the spectral effect of varnish increases linearly with varnish thickness, indicating that thick patches of varnish dominate the spectral properties. As a result, median varnish thickness can be determined from spectral measurements. In addition, the composition of a substrate can be estimated through varnish layers up to 40–50 μm in median thickness, and the composition of the varnish material can be determined if the substrate material is known. The varnishes studied are composed primarily of clay materials, consistent with previous studies of varnish composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal emission spectrometer experiment: Mars Observer mission
Christensen, P. R., Anderson, D. L., Chase, S. C., Clark, R. N., Kieffer, H. H., Malin, M. C., Pearl, J. C., Carpenter, J., Bandiera, N., Brown, F. G., et al. (1992) · Journal of Geophysical Research: Planets · doi:10.1029/92je00453 · Cited by 309
Self-citation
Cited by
Christensen, P. R., Bandfield, J. L., Hamilton, V. E., Ruff, S. W., Kieffer, H. H., Titus, T. N., Malin, M. C., Morris, R. V., Lane, M. D., Clark, R. L., et al. (2001) · Journal of Geophysical Research: Planets · doi:10.1029/2000je001370 · Cited by 1,061
“Extensive work over the past 40 years has demonstrated the utility of vibrational spectroscopy for the quantitative determination of mineralogy and petrology [e.g., Lyon, 1962; Lazerev, 1972; Farmer, 1974; Hunt and Salisbury, 1976; Salisbury et al., 1987, 1991; Salisbury, 1993; Christensen and Harrison, 1993; Lane and…”
BackgroundSelf-citationThe Thermal Emission Imaging System (THEMIS) for the Mars 2001 Odyssey Mission
Christensen, P. R., Jakosky, B. M., Kieffer, H. H., Malin, M. C., McSween, H. Y., Nealson, K., Mehall, G. L., Silverman, S. H., Ferry, S., Caplinger, M., et al. (2004) · Space Science Reviews · doi:10.1023/b:spac.0000021008.16305.94 · Cited by 943
Self-citationThe Thermal Emission Imaging System (Themis) for the Mars 2001 Odyssey Mission
Christensen, P. R., Jakosky, B. M., Kieffer, H. H., Malin, M. C., Jr, H. Y. M., Nealson, K., Mehall, G. L., Silverman, S. H., Ferry, S., Caplinger, M., et al. (2004) · 2001 Mars Odyssey · doi:10.1007/978-0-306-48600-5_3 · Cited by 685
Self-citationMineral abundance determination: Quantitative deconvolution of thermal emission spectra
Ramsey, M. S., & Christensen, P. R. (1998) · Journal of Geophysical Research: Solid Earth · doi:10.1029/97jb02784 · Cited by 437
Self-citationCharacterization of Laser-Induced Breakdown Spectroscopy (LIBS) for Application to Space Exploration
Knight, A. K., Scherbarth, N. L., Cremers, D. A., & Ferris, M. J. (2000) · Applied Spectroscopy · doi:10.1366/0003702001949591 · Cited by 432
Mineralogy at Meridiani Planum from the Mini-TES Experiment on the Opportunity Rover
Christensen, P. R., Wyatt, M. B., Glotch, T. D., Rogers, A. D., Anwar, S., Arvidson, R. E., Bandfield, J. L., Blaney, D. L., Budney, C., Calvin, W. M., et al. (2004) · Science · doi:10.1126/science.1104909 · Cited by 427
Self-citationA thermal emission spectral library of rock‐forming minerals
Christensen, P. R., Bandfield, J. L., Hamilton, V. E., Howard, D. A., Lane, M. D., Piatek, J. L., Ruff, S. W., & Stefanov, W. L. (2000) · Journal of Geophysical Research: Planets · doi:10.1029/1998je000624 · Cited by 419
Self-citationChristensen, P. R., Morris, R. V., Lane, M. D., Bandfield, J. L., & Malin, M. C. (2001) · Journal of Geophysical Research: Planets · doi:10.1029/2000je001415 · Cited by 348
Self-citationEffects of Hyperfine Particles on Reflectance Spectra from 0.3 to 25 μm☆
MUSTARD, J., & HAYS, J. (1997) · Icarus · doi:10.1006/icar.1996.5583 · Cited by 302
Mid-infrared emission spectroscopy of sulfate and sulfate-bearing minerals
Lane, M. D. (2007) · American Mineralogist · doi:10.2138/am.2007.2170 · Cited by 293
Christensen, P. R., Bandfield, J. L., Smith, M. D., Hamilton, V. E., & Clark, R. N. (2000) · Journal of Geophysical Research: Planets · doi:10.1029/1999je001127 · Cited by 288
Self-citationThermal‐infrared remote sensing and Kirchhoff's law: 1. Laboratory measurements
Salisbury, J. W., Wald, A., & D'Aria, D. M. (1994) · Journal of Geophysical Research: Solid Earth · doi:10.1029/93jb03600 · Cited by 275
Ruff, S. W., Christensen, P. R., Barbera, P. W., & Anderson, D. L. (1997) · Journal of Geophysical Research: Solid Earth · doi:10.1029/97jb00593 · Cited by 248
Self-citationInitial results from the Mini-TES experiment in Gusev crater from the Spirit rover
Christensen, P. R., Ruff, S. W., Fergason, R. L., Knudson, A. T., Anwar, S., Arvidson, R. E., Bandfield, J. L., Blaney, D. L., Budney, C., Calvin, W. M., et al. (2004) · Science · doi:10.1126/science.1100564 · Cited by 173
Self-citationHAMILTON, V. E., CHRISTENSEN, P. R., McSWEEN, H. Y., & BANDFIELD, J. L. (2003) · Meteoritics & Planetary Science · doi:10.1111/j.1945-5100.2003.tb00284.x · Cited by 173
“…spectra were acquired at ASU with a Nicolet Nexus 670 FTIR spectrometer that measures sample emissivity from ~2000–220 cm−1 (~5–45 µm) at 2 cm−1 spectral sampling; data acquisition followed the physical set up and calibration described by Ruff et al. (1997) and Christensen and Harrison (1993).”
MethodSelf-citation
Metadata
- Authors
- Christensen, P. R., & Harrison, S. T.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 1993-11-10
- Volume
- 98
- Issue
- B11
- Pages
- 19819-19834
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2000910293
- Cited by
- 139
- References
- 1
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.