Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 239

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Photoexcitation dynamics in solution-processed formamidinium lead iodide perovskite thin films for solar cell applications

Open access
Fang, Hong-Hua, Wang, Feng, Adjokatse, Sampson, Zhao, Ni, Even, Jacky, Antonietta Loi, Maria·2015·Light: Science & Applications

Abstract

Formamidinium lead iodide (FAPbI3) is a newly developed hybrid perovskite that potentially can be used in high-efficiency solution-processed solar cells. Here, the temperature-dependent dynamic optical properties of three types of FAPbI3 perovskite films (fabricated using three different precursor systems) are comparatively studied. The time-resolved photoluminescence (PL) spectra reveal that FAPbI3 films made from the new precursor (a mixture of formamidinium iodide and hydrogen lead triiodide) exhibit the longest lifetime of 439 ns at room temperature, suggesting a lower number of defects and lower non-radiative recombination losses compared with FAPbI3 obtained from the other two precursors. From the temperature-dependent PL spectra, a phase transition in the films is clearly observed. Meanwhile, exciton-binding energies of 8.1 and 18 meV for the high- and low-temperature phases are extracted, respectively. Importantly, the PL spectra for all of the samples show a single peak at room temperature, whereas at liquid-helium temperature the emission features two peaks: one in higher energy displaying a fast decay (0.5 ns) and a second red-shifted peak with a decay of up to several microseconds. These two emissions, separated by ~18 meV, are attributed to free excitons and bound excitons with singlet and triplet characters, respectively. A study of a newly developed perovskite material for solar cells has revealed that its photophysics is sensitive to how it is prepared. Hong-Hua Fang and co-workers from the Zernike Institute for Advanced Materials in the Netherlands and the Chinese University of Hong Kong fabricated formamidinium lead iodide perovskite thin films (FAPbI3) from three different precursors. All the samples showed almost identical photoluminescence spectra and small exciton binding energy at room temperature, but their photoexcitation lifetimes varied depending on the precursor used. Films made from the precursor HPbI3 exhibited the longest lifetime of 439 nanoseconds, suggesting they contain few defects and have low non-radiative losses. These insights are valuable for learning how best to apply the material to solar cells and other optoelectronic devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/lsa.2016.56

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 239

Metadata

Authors
Fang, H.-H., Wang, F., Adjokatse, S., Zhao, N., Even, J., & Antonietta Loi, M.
Venue
Light: Science & Applications
Published
2015-12-25
Volume
5
Issue
4
Pages
e16056-e16056
ISSN
2047-7538 (ISSN-L)
OpenAlex
W2318242226
Cited by
239
References
2
FWCI
9.94
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.