CoChat

Tuning selectivity of electrochemical reactions by atomically dispersed platinum catalyst

Open access

The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.

Abstract

Maximum atom efficiency as well as distinct chemoselectivity is expected for electrocatalysis on atomically dispersed (or single site) metal centres, but its realization remains challenging so far, because carbon, as the most widely used electrocatalyst support, cannot effectively stabilize them. Here we report that a sulfur-doped zeolite-templated carbon, simultaneously exhibiting large sulfur content (17 wt% S), as well as a unique carbon structure (that is, highly curved three-dimensional networks of graphene nanoribbons), can stabilize a relatively high loading of platinum (5 wt%) in the form of highly dispersed species including site isolated atoms. In the oxygen reduction reaction, this catalyst does not follow a conventional four-electron pathway producing H 2 O, but selectively produces H 2 O 2 even over extended times without significant degradation of the activity. Thus, this approach constitutes a potentially promising route for producing important fine chemical H 2 O 2 , and also offers opportunities for tuning the selectivity of other electrochemical reactions on various metal catalysts.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/ncomms10922

Cites

69 of 69 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Characterizations of LSC and HSC. (a) Energy dispersive X-ray mapping images of C (red) and S (yellow); scale bar, 1.0 μm. (b) XPS-S2p spectra. XPS peaks were deconvoluted with C–S (red lines) and S–Ox (blue and green lines) phases by considering a spin–orbit splitting of 1.2 eV in 2p1/2 (dotted lines) and 2p3/2 (solid lines). S-contents estimated from an elemental analysis and portions of S-phases determined from XPS peak deconvolution are summarized as an inset table.
Figure 1 Characterizations of LSC and HSC. (a) Energy dispersive X-ray mapping images of C (red) and S (yellow); scale bar, 1.0 μm. (b) XPS-S2p spectra. XPS peaks were deconvoluted with C–S (red lines) and S–Ox (blue and green lines) phases by considering a spin–orbit splitting of 1.2 eV in 2p1/2 (dotted lines) and 2p3/2 (solid lines). S-contents estimated from an elemental analysis and portions of S-phases determined from XPS peak deconvolution are summarized as an inset table.CC BY · PubMed Central
Figure 2 Structures of the Pt species on the prepared catalysts. (a–c) TEM images indicating the presence of ca. 4-nm Pt clusters in Pt/ZTC (a), Pt clusters (1–2 nm) in Pt/LSC (b), and the absence of discernable Pt species in Pt/HSC (c); scale bar, 30 nm. (d–f) To visualize the dispersion and structure of sub-nanometre Pt species, atomic resolution HAADF-STEM images are additionally provided for Pt/ZTC (d), Pt/LSC (e), and Pt/HSC (f); scale bar, 2 nm. (g–i) Histograms of the particle size distributions for Pt/ZTC (g), Pt/LSC (h), and Pt/HSC (i). Average particle sizes and s.d.'s of Pt/ZTC and Pt/LSC were fitted with a Gaussian function. The images reveal that Pt/LSC contains both of atomically dispersed Pt species and Pt clusters. Pt/HSC contains mainly the atomically dispersed Pt species. (j) Fourier transforms of k3-weighted Pt LIII-edge EXAFS, confirming that Pt species in Pt/HSC exhibit only Pt–S coordination (CN=3.8) without significant Pt–Pt coordination. (k) Proposed atomistic structure of the Pt/HSC based on the buckybowl-like structure of zeolite-templated carbon suggested by Nishihara et al.48 with possible thiophene- and thiolate-like functional groups at graphene edge sites, as well as coordinated Pt species (C: grey, H: white, S: yellow and Pt: purple).
Figure 2 Structures of the Pt species on the prepared catalysts. (a–c) TEM images indicating the presence of ca. 4-nm Pt clusters in Pt/ZTC (a), Pt clusters (1–2 nm) in Pt/LSC (b), and the absence of discernable Pt species in Pt/HSC (c); scale bar, 30 nm. (d–f) To visualize the dispersion and structure of sub-nanometre Pt species, atomic resolution HAADF-STEM images are additionally provided for Pt/ZTC (d), Pt/LSC (e), and Pt/HSC (f); scale bar, 2 nm. (g–i) Histograms of the particle size distributions for Pt/ZTC (g), Pt/LSC (h), and Pt/HSC (i). Average particle sizes and s.d.'s of Pt/ZTC and Pt/LSC were fitted with a Gaussian function. The images reveal that Pt/LSC contains both of atomically dispersed Pt species and Pt clusters. Pt/HSC contains mainly the atomically dispersed Pt species. (j) Fourier transforms of k3-weighted Pt LIII-edge EXAFS, confirming that Pt species in Pt/HSC exhibit only Pt–S coordination (CN=3.8) without significant Pt–Pt coordination. (k) Proposed atomistic structure of the Pt/HSC based on the buckybowl-like structure of zeolite-templated carbon suggested by Nishihara et al.48 with possible thiophene- and thiolate-like functional groups at graphene edge sites, as well as coordinated Pt species (C: grey, H: white, S: yellow and Pt: purple).CC BY · PubMed Central
Figure 3 Electrocatalytic properties. (a) ORR activities of the prepared catalysts measured in an O2-saturated 0.1 M HClO4 electrolyte with 900 r.p.m. rotation. (b) H2O2 production selectivity estimated by RRDE experiments (Pt ring potential: 1.2 VRHE). (c) PDR activities derived from the decline in H2O2 concentration in a 10 mM H2O2 starting solution (50 ml) containing 10 mg catalysts. For comparison, the PDR of a blank solution without catalyst was also investigated. (d) PRR activities measured in a 10 mM H2O2/0.1 M HClO4 electrolyte with 900 r.p.m. rotation. (e) Accumulated H2O2 concentrations in an H-cell with a 1 M HClO4 electrolyte and a Nafion 115 membrane. The H-cell was operated in short-circuit condition (V=0) at 278 K. (f) Concentrations of H2O2 produced on the Pt/HSC in an electrochemical H-cell during repeated 2 h operation cycles. Concentrations of H2O2 are evaluated by iodometry.
Figure 3 Electrocatalytic properties. (a) ORR activities of the prepared catalysts measured in an O2-saturated 0.1 M HClO4 electrolyte with 900 r.p.m. rotation. (b) H2O2 production selectivity estimated by RRDE experiments (Pt ring potential: 1.2 VRHE). (c) PDR activities derived from the decline in H2O2 concentration in a 10 mM H2O2 starting solution (50 ml) containing 10 mg catalysts. For comparison, the PDR of a blank solution without catalyst was also investigated. (d) PRR activities measured in a 10 mM H2O2/0.1 M HClO4 electrolyte with 900 r.p.m. rotation. (e) Accumulated H2O2 concentrations in an H-cell with a 1 M HClO4 electrolyte and a Nafion 115 membrane. The H-cell was operated in short-circuit condition (V=0) at 278 K. (f) Concentrations of H2O2 produced on the Pt/HSC in an electrochemical H-cell during repeated 2 h operation cycles. Concentrations of H2O2 are evaluated by iodometry.CC BY · PubMed Central
Figure 4 Proposed ORR mechanism on the atomically dispersed Pt catalyst. (a) Atomically dispersed Pt (purple) complexed with four sulfur-containing moieties consisting of two thiophene and two thiolate groups that are covalently bonded to a carbon framework. (b) Activation of Pt centre by substituting two S of thiophene-like moieties with two O of water molecules. (c) The first reduction of an O2 via proton-coupled electron transfer (PCET), forming OOH. This is a shared elementary step of the two- and four-electon pathways. (d) Two-electron pathway: H2O2 formation by the second PCET and the subsequent substitution of an H2O2 molecule with an outer-sphere H2O molecule, recovering the initial state where Pt is complexed with two thiolates and two waters. (e) Four-electron pathway: H2O formation by the second PCET involving O–O bond dissociation. (f) Four-electron pathway: OH formation by the third PCET to the O atom. (g) The fourth PCET to the OH forms an inner-sphere H2O, recovering the initial state where Pt is complexed with two thiolates and two waters. (h) Calculated kinetic barriers of the second PCET steps for the two-electron pathway (blue) and the four-electron pathway (red) using Marcus kinetic theory. (C: grey, H: white, S: yellow, O: red, and Pt: purple).
Figure 4 Proposed ORR mechanism on the atomically dispersed Pt catalyst. (a) Atomically dispersed Pt (purple) complexed with four sulfur-containing moieties consisting of two thiophene and two thiolate groups that are covalently bonded to a carbon framework. (b) Activation of Pt centre by substituting two S of thiophene-like moieties with two O of water molecules. (c) The first reduction of an O2 via proton-coupled electron transfer (PCET), forming OOH. This is a shared elementary step of the two- and four-electon pathways. (d) Two-electron pathway: H2O2 formation by the second PCET and the subsequent substitution of an H2O2 molecule with an outer-sphere H2O molecule, recovering the initial state where Pt is complexed with two thiolates and two waters. (e) Four-electron pathway: H2O formation by the second PCET involving O–O bond dissociation. (f) Four-electron pathway: OH formation by the third PCET to the O atom. (g) The fourth PCET to the OH forms an inner-sphere H2O, recovering the initial state where Pt is complexed with two thiolates and two waters. (h) Calculated kinetic barriers of the second PCET steps for the two-electron pathway (blue) and the four-electron pathway (red) using Marcus kinetic theory. (C: grey, H: white, S: yellow, O: red, and Pt: purple).CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 69 references

Cited by

Items 601–700 of 850

Metadata

Authors
Choi, C. H., Kim, M., Kwon, H. C., Cho, S. J., Yun, S., Kim, H.-T., Mayrhofer, K. J. J., Kim, H., & Choi, M.
Affiliations
  • Korea Advanced Institute of Science and Technology (KR)
  • Chonnam National University (KR)
  • Forschungszentrum Jülich (DE)
Corresponding author
  • Kim, Hee-Tak
  • Kim, Hyungjun
  • Choi, Minkee
Venue
Nature Communications
Published
2016-03-08
Volume
7
Issue
1
Pages
10922-10922
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2297872481
Cited by
849
References
69
Citations by year
2026: 31 · 2025: 60 · 2024: 82 · 2023: 100 · 2022: 130 · 2021: 113 · 2020: 133 · 2019: 93 · 2018: 59 · 2017: 36 · 2016: 12
FWCI
18.10
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • JuSER (Forschungszentrum Jülich) (submittedVersion, other-oa)
  • MPG.PuRe (Max Planck Society) (submittedVersion)
Funders
  • Alexander von Humboldt-Stiftung
  • National Research Foundation
  • Pohang University of Science and Technology
  • National Research Foundation of Korea (2013M3A6B1078884, 2011-0011392, NRF-2014M1A8A1049256, NRF-2011-0011392)
  • Korea Advanced Institute of Science and Technology
  • Global Frontier Hybrid Interface Materials
  • Korea Carbon Capture and Sequestration R and D Center (NRF-2014M1A8A1049256)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
Keywords
atomically dispersed platinum, single-site catalysts, oxygen reduction reaction, hydrogen peroxide selectivity, graphene nanoribbons, chemoselectivity, electrocatalysis, fine chemical industry

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.