The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity
Open accessAbstract
Poor stability of organic–inorganic halide perovskite materials in humid condition has hindered the success of perovskite solar cells in real applications since controlled atmosphere is required for device fabrication and operation, and there is a lack of effective solutions to this problem until now. Here we report the use of lead (II) thiocyanate (Pb(SCN)2) precursor in preparing perovskite solar cells in ambient air. High-quality CH 3 NH 3 PbI 3−x(SCN)x perovskite films can be readily prepared even when the relative humidity exceeds 70%. Under optimized processing conditions, we obtain devices with an average power conversion efficiency of 13.49% and the maximum efficiency over 15%. In comparison with typical CH 3 NH 3 PbI 3-based devices, these solar cells without encapsulation show greatly improved stability in humid air, which is attributed to the incorporation of thiocyanate ions in the crystal lattice. The findings pave a way for realizing efficient and stable perovskite solar cells in ambient atmosphere.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Kim, M., Kim, G.-H., Lee, T. K., Choi, I. W., Choi, H. W., Jo, Y., Yoon, Y. J., Kim, J. W., Lee, J., Huh, D., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.014 · Cited by 1,753
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Planar‐Structure Perovskite Solar Cells with Efficiency beyond 21%
Jiang, Q., Chu, Z., Wang, P., Yang, X., Liu, H., Wang, Y., Yin, Z., Wu, J., Zhang, X., & You, J. (2017) · Advanced Materials · doi:10.1002/adma.201703852 · Cited by 1,250
Evidence for ion migration in hybrid perovskite solar cells with minimal hysteresis
Calado, P., Telford, A. M., Bryant, D., Li, X., Nelson, J., O’Regan, B. C., & Barnes, P. R. F. (2016) · Nature Communications · doi:10.1038/ncomms13831 · Cited by 845
Metadata
- Authors
- Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F.
- Venue
- Nature Communications
- Published
- 2016-04-01
- Volume
- 7
- Issue
- 1
- Pages
- 11105-11105
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2323356740
- Cited by
- 590
- References
- 3
- FWCI
- 41.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity. https://app.cochat.ai/papers/10.1038/ncomms11105
- The paper
- Tai, Q., You, P., Sang, H., Liu, Z., Hu, C., Chan, H. L. W., & Yan, F. (2016). Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity. Nature Communications. https://doi.org/10.1038/ncomms11105
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.