CoChat

Self-folding origami at any energy scale

Open access
Pinson, Matthew B., Stern, Menachem, Carruthers Ferrero, Alexandra, Witten, Thomas A., Chen, Elizabeth, Murugan, Arvind · 2017 · Nature Communications

The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index; 7 of the 15 sources its claims cite were checked for support.

Abstract

We present a physical approach that allows systematic exploration of the entire space of crease patterns as a function of the folding energy. Consequently, we uncover statistical results in origami, finding the entropy of crease patterns of given folding energy.

Overview

CoChat Summary

TL;DR

The paper presents a loop-equation hierarchy for designing self-folding origami crease patterns at arbitrary folding energy, without relying on Miura-Ori, Kawasaki, or special symmetry. It derives entropy–energy statistics for large quad meshes and shows that Mountain-Valley choice strongly controls typical foldability.

Key findings

  • Solving loop equations in sequence gives a controlled reduction in face bending: each successive equation reduces face bending by a factor of ∼10², spanning nine orders of magnitude; the residue of the leading unsolved loop equation predicts face bending.
  • Natural MV configurations (6/16 of all MV choices) account for 90% of modes softer than E∼10⁻¹, while most of the remaining 10% are semi-natural (8/16); for stiff modes E>10⁻¹, semi-natural and unnatural configurations form a majority. The abstract also states that 62% of all MV choices account for 10% of highly foldable patterns.
  • The entropy of crease patterns for a given MV is extensive in pattern size A and has the form S=(A/2)log(E/E₀)+…; the probability of a random pattern being softer than energy E decreases exponentially with mesh size A but only as a power law with E.
  • Face bending follows loop-equation residues up to crease folding of ∼π/2 Rad; beyond that, nonlinear effects appear, including non-monotonic/bistable behavior. COMSOL finite element simulations localize bending stress to a diagonal furrow and indicate the red mode is softer than the green mode under a fixed folding force.

Methods

  • The study analyzes general 4-vertices and quad meshes using transfer functions and a hierarchy of loop equations; an augmented quad with a diagonal crease is used as a proxy for face bending, with loop equations solved order by order via gradient descent.
  • For statistics, ∼10⁶ random quads were sampled by randomly and independently displacing vertices of a regular square lattice; each was folded with a random torque to max(ρ_crease)=1 Rad, recording MV data and face bending. Large meshes of A quads were similarly sampled and histogrammed to define entropy.
  • Finite element simulations in COMSOL were used to check the thin-sheet approximation, including stretching, bending of all nine faces, finite thickness, and finite crease width.

Limitations

  • Stated: the generated samples were not sufficient to probe the energy scale E₀ where the log E dependence is expected to break down; the simplified diagonal-crease model cannot capture precise folding energies seen in COMSOL.
  • Stated: the work focuses on quad meshes and valence-four vertices, leaving mechanisms with other topologies to future work.
  • Evident: the analysis models only face bending under a thin-sheet approximation, though the paper justifies this via a virial theorem and checks it with COMSOL; results are derived for the simplest random ensemble, though the paper says they can be adapted to other ensembles.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/ncomms15477

Cites

38 of 38 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Designing self-folding origami. (a) Forces applied to a ‘self-folding' sheet will preferentially actuate the one pathway designed to have significantly less face bending than the other two pathways shown (that is, designed to have ). (b) The celebrated Miura-Ori pattern is a special highly symmetric pattern with . (c–e) In this work, we study a larger space of experimentally relevant crease patterns by going beyond rigidly foldable symmetric patterns. The folding energy scale of such patterns can be made as small as needed in a systematic manner; where is the median crease folding angle, and n the number of solved loop equations that are derived here. Patterns in c–e are geometrically distinct from traditionally studied limits (Kawasaki vertices, Miura-Ori Mountain-Valley choice). These patterns solve exactly only one (d,e) or two (c) loop equations.
Figure 1 Designing self-folding origami. (a) Forces applied to a ‘self-folding' sheet will preferentially actuate the one pathway designed to have significantly less face bending than the other two pathways shown (that is, designed to have ). (b) The celebrated Miura-Ori pattern is a special highly symmetric pattern with . (c–e) In this work, we study a larger space of experimentally relevant crease patterns by going beyond rigidly foldable symmetric patterns. The folding energy scale of such patterns can be made as small as needed in a systematic manner; where is the median crease folding angle, and n the number of solved loop equations that are derived here. Patterns in c–e are geometrically distinct from traditionally studied limits (Kawasaki vertices, Miura-Ori Mountain-Valley choice). These patterns solve exactly only one (d,e) or two (c) loop equations.CC BY · PubMed Central
Figure 2 Loop equations uncover folding modes of variable face bending over orders of magnitude. (a) Folding angles ρ1, ρ2 of adjacent creases at a 4-vertex are related by a transfer function T, determined by in-plane angles θ. (b) For a quad to be foldable, a fold angle ρ of an edge must return as ρ when transported around the loop using transfer functions TA, TB, TC, TD. For a smooth folding motion, the equation must be satisfied order by order in . (c) Face bending can be dramatically reduced in a controlled manner by solving loop equations in sequence. Random quads (red triangles), not designed to solve any loop equation, show face bending comparable to crease folding. Quads solving the first loop equation ΠR=1 (orange × s) typically have face bending <10−2 Rad. We find that the residue of the highest loop equation not solved determines the extent of face bending; hence orange points and green points show the drop of face bending with decreasing ∑K and ∑L respectively.
Figure 2 Loop equations uncover folding modes of variable face bending over orders of magnitude. (a) Folding angles ρ1, ρ2 of adjacent creases at a 4-vertex are related by a transfer function T, determined by in-plane angles θ. (b) For a quad to be foldable, a fold angle ρ of an edge must return as ρ when transported around the loop using transfer functions TA, TB, TC, TD. For a smooth folding motion, the equation must be satisfied order by order in . (c) Face bending can be dramatically reduced in a controlled manner by solving loop equations in sequence. Random quads (red triangles), not designed to solve any loop equation, show face bending comparable to crease folding. Quads solving the first loop equation ΠR=1 (orange × s) typically have face bending <10−2 Rad. We find that the residue of the highest loop equation not solved determines the extent of face bending; hence orange points and green points show the drop of face bending with decreasing ∑K and ∑L respectively.CC BY · PubMed Central
Figure 3 Mountain-Valley choices fall into three classes based on foldability of typical modes. (a) For example, semi-natural MV configurations dictate that at three vertices and at one, which is statistically less compatible with ΠR=1 than natural configurations (two , two ). (b) Consequently, when random modes of N, S and U types are sampled, U (unnatural) type modes tend to be much stiffer than S or N type. We sampled 106 random modes, simulated folding and recorded their stiffness; we show the histogram binned by (log) face bending energy , which we call the entropy S(E). . Among soft patterns (E<10−1), 90% of random modes are of Natural MV type which account for only 6/16th of all MV configurations. S- and U-type modes dominate at high energies E>10−1. The histogram captures a statistical relationship between MV choices and foldability for ‘typical' quad patterns and MV classes.
Figure 3 Mountain-Valley choices fall into three classes based on foldability of typical modes. (a) For example, semi-natural MV configurations dictate that at three vertices and at one, which is statistically less compatible with ΠR=1 than natural configurations (two , two ). (b) Consequently, when random modes of N, S and U types are sampled, U (unnatural) type modes tend to be much stiffer than S or N type. We sampled 106 random modes, simulated folding and recorded their stiffness; we show the histogram binned by (log) face bending energy , which we call the entropy S(E). . Among soft patterns (E<10−1), 90% of random modes are of Natural MV type which account for only 6/16th of all MV configurations. S- and U-type modes dominate at high energies E>10−1. The histogram captures a statistical relationship between MV choices and foldability for ‘typical' quad patterns and MV classes.CC BY · PubMed Central
Figure 4 Entropy of crease patterns as a function of face bending energy. We sampled ∼105 random quad meshes made of A quads (for A=1, 2, 4, 6), folded them with the same fixed Mountain-Valley choice and noted the face bending energy per quad . The entropy of patterns is . is the number of random patterns in an energy interval d log .). Thus the probability of finding a soft crease pattern in a random ensemble diminishes exponentially with mesh size A (for fixed ) but only as a power law in energy (for fixed A).
Figure 4 Entropy of crease patterns as a function of face bending energy. We sampled ∼105 random quad meshes made of A quads (for A=1, 2, 4, 6), folded them with the same fixed Mountain-Valley choice and noted the face bending energy per quad . The entropy of patterns is . is the number of random patterns in an energy interval d log .). Thus the probability of finding a soft crease pattern in a random ensemble diminishes exponentially with mesh size A (for fixed ) but only as a power law in energy (for fixed A).CC BY · PubMed Central
Figure 5 Face bending for large folding angles and in finite element simulations. (a) Face bending for a quad when folded along different Mountain-Valley modes. While stiffness for small folding angles less than, say, π/2 is predicted by the loop equation residue , the initially soft red mode becomes stiffer than others at large folding angles. The other three modes show non-monotonic bistable face bending. (b) Finite element simulations (COMSOL Multiphysics) of a 2D plate model of the same quad when folded along the red and green modes with a fixed magnitude of folding force. The associated face deformation elastic energy is localized to a diagonal furrow as predicted for thin plates34. (Material model: melamine resin, elastic modulus 6 GPa, density 1,800 kg m−3, thickness of plates is ∼1/1,000 of width.)
Figure 5 Face bending for large folding angles and in finite element simulations. (a) Face bending for a quad when folded along different Mountain-Valley modes. While stiffness for small folding angles less than, say, π/2 is predicted by the loop equation residue , the initially soft red mode becomes stiffer than others at large folding angles. The other three modes show non-monotonic bistable face bending. (b) Finite element simulations (COMSOL Multiphysics) of a 2D plate model of the same quad when folded along the red and green modes with a fixed magnitude of folding force. The associated face deformation elastic energy is localized to a diagonal furrow as predicted for thin plates34. (Material model: melamine resin, elastic modulus 6 GPa, density 1,800 kg m−3, thickness of plates is ∼1/1,000 of width.)CC BY · PubMed Central

Verification

Claims the paper makes

6 Valid · 1 Not valid · 6 Not checked · 56 Own results and interpretations

28 more claims

Create a free account to see all 69 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 29
  • Probably not a substantial claim. 6
  • Borderline: one of the tests for a substantial claim is unclear. 2
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Show all 38 references

Research works printed but not linked: 5

  1. Pellegrino, S. Deployable Structures Springer (2014).
  2. Tachi, T. in Proceedings of Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures (eds Alberto, D. & Carlos, L.) 2295–2305 (Universidad Politecnica de Valencia, Spain, 2010).
  3. Merlet, J. P. Parallel Robots Springer Science & Business Media (2012).
  4. Bern, M. & Hayes, B. in Proceedings of the 7th Annual ACM-SIAM Symposium on Discrete Algorithms 175–183 (Atlanta, GA, USA, 1996).
  5. Huffman, D. A. Curvature and creases: a primer on paper. IEEE Trans. Comput. C-25, 1010–1019 (1976). · DOI · Paper page

Cited by

See all 57

Metadata

Authors
Pinson, M. B., Stern, M., Carruthers Ferrero, A., Witten, T. A., Chen, E., & Murugan, A.
Affiliations
  • University of Chicago (US)
  • Harvard University (US)
Corresponding author
Murugan, Arvind
Venue
Nature Communications
Published
2017-05-18
Volume
8
Issue
1
Pages
15477-15477
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2614110017
Cited by
56
References
38
Citations by year
2026: 2 · 2025: 8 · 2024: 3 · 2023: 5 · 2022: 9 · 2021: 6 · 2020: 8 · 2019: 5 · 2018: 8 · 2017: 2
FWCI
5.31
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Science Foundation (1204686)
  • ConocoPhillips
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
  • Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
Keywords
crease patterns, folding energy, Miura-ori, origami design, metamaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Self-folding origami at any energy scale. https://app.cochat.ai/papers/10.1038/ncomms15477
The paper
Pinson, M. B., Stern, M., Carruthers Ferrero, A., Witten, T. A., Chen, E., & Murugan, A. (2017). Self-folding origami at any energy scale. Nature Communications. https://doi.org/10.1038/ncomms15477

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.