Self-folding origami at any energy scale
Open accessThe DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index; 7 of the 15 sources its claims cite were checked for support.
Abstract
We present a physical approach that allows systematic exploration of the entire space of crease patterns as a function of the folding energy. Consequently, we uncover statistical results in origami, finding the entropy of crease patterns of given folding energy.
Overview
CoChat Summary
TL;DR
The paper presents a loop-equation hierarchy for designing self-folding origami crease patterns at arbitrary folding energy, without relying on Miura-Ori, Kawasaki, or special symmetry. It derives entropy–energy statistics for large quad meshes and shows that Mountain-Valley choice strongly controls typical foldability.
Key findings
- Solving loop equations in sequence gives a controlled reduction in face bending: each successive equation reduces face bending by a factor of ∼10², spanning nine orders of magnitude; the residue of the leading unsolved loop equation predicts face bending.
- Natural MV configurations (6/16 of all MV choices) account for 90% of modes softer than E∼10⁻¹, while most of the remaining 10% are semi-natural (8/16); for stiff modes E>10⁻¹, semi-natural and unnatural configurations form a majority. The abstract also states that 62% of all MV choices account for 10% of highly foldable patterns.
- The entropy of crease patterns for a given MV is extensive in pattern size A and has the form S=(A/2)log(E/E₀)+…; the probability of a random pattern being softer than energy E decreases exponentially with mesh size A but only as a power law with E.
- Face bending follows loop-equation residues up to crease folding of ∼π/2 Rad; beyond that, nonlinear effects appear, including non-monotonic/bistable behavior. COMSOL finite element simulations localize bending stress to a diagonal furrow and indicate the red mode is softer than the green mode under a fixed folding force.
Methods
- The study analyzes general 4-vertices and quad meshes using transfer functions and a hierarchy of loop equations; an augmented quad with a diagonal crease is used as a proxy for face bending, with loop equations solved order by order via gradient descent.
- For statistics, ∼10⁶ random quads were sampled by randomly and independently displacing vertices of a regular square lattice; each was folded with a random torque to max(ρ_crease)=1 Rad, recording MV data and face bending. Large meshes of A quads were similarly sampled and histogrammed to define entropy.
- Finite element simulations in COMSOL were used to check the thin-sheet approximation, including stretching, bending of all nine faces, finite thickness, and finite crease width.
Limitations
- Stated: the generated samples were not sufficient to probe the energy scale E₀ where the log E dependence is expected to break down; the simplified diagonal-crease model cannot capture precise folding energies seen in COMSOL.
- Stated: the work focuses on quad meshes and valence-four vertices, leaving mechanisms with other topologies to future work.
- Evident: the analysis models only face bending under a thin-sheet approximation, though the paper justifies this via a virial theorem and checks it with COMSOL; results are derived for the simplest random ensemble, though the paper says they can be adapted to other ensembles.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
6 Valid · 1 Not valid · 6 Not checked · 56 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The final odd-one-out crease can be any one of the two creases whose neighbouring angles add to less than π (ref. 23) (Supplementary Fig. 1).”
- Also stated in: § Vertex transfer function · plain
“The final odd-one-out crease can be any one of the two creases whose neighbouring angles add to less than π (ref. 23)”
§ Self-folding origami at any energy scale > Results > Vertex transfer function
What the sources say
- Partly supportedcites [23] Waitukaitis, S., Menaut, R., Chen, B. G.-g. & van Hecke, M. Origami multistability: from single vertices to metasheets. Phys. Rev. Lett. 114, 055503 (2015). sourceExperimental — accuracy not yet measured
On p. 2, the paper says that, for generic four-vertices, two folds can be the unique fold with the opposite sign, and that they straddle a common plate. It introduces a condition for which fold can be unique, but the formula is not decoded in our copy, so the specific criterion that its neighbouring angles sum to less than π cannot be verified. (LLM, conf=0.78)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Also stated in: § Vertex transfer function · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“three out of the four creases must fold in a common orientation (say, Mountain, black in Fig. 2a) with the final odd-one-out crease folding the other way (Valley state, red).”
§ Self-folding origami at any energy scale > Results > Vertex transfer function
What the sources say
- Supportedcites [23] Waitukaitis, S., Menaut, R., Chen, B. G.-g. & van Hecke, M. Origami multistability: from single vertices to metasheets. Phys. Rev. Lett. 114, 055503 (2015). source
The discussion of generic 4-vertices (p. 2) states that one folding angle must have the opposite sign from the rest. The configuration-space section (p. 1) defines positive angles as valleys and negative angles as mountains, matching the claimed three-to-one mountain–valley assignment. (LLM, conf=0.93)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“We emphasize that the transfer functions T, R depend on the MV configuration at the vertex23.”
§ Self-folding origami at any energy scale > Results > Vertex transfer function
What the sources say
- Partly supportedcites [23] Waitukaitis, S., Menaut, R., Chen, B. G.-g. & van Hecke, M. Origami multistability: from single vertices to metasheets. Phys. Rev. Lett. 114, 055503 (2015). sourceExperimental — accuracy not yet measured
The Generic Configuration Space discussion (pp. 1–2) identifies two mountain–valley assignments with distinct branches of motion and shows folding-angle relationships for those branches. This supports the general idea that vertex configuration relationships vary with the mountain–valley assignment, but our copy does not define transfer functions T and R or establish their specific dependence. (LLM, conf=0.78)
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Finally, we find an entropy–energy relationship quantifying the number of crease patterns with given folding energy, describing how many more crease patterns become available for a given increase in available actuation energy”
§ Self-folding origami at any energy scale > Abstract
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Notably, we identify three classes of Mountain-Valley choices that have widely varying ‘typical' folding energies.”
§ Self-folding origami at any energy scale > Abstract
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
28 more claims
Create a free account to see all 69 claims and every source verdict.
- It may state two separate claims as one. 29
- Probably not a substantial claim. 6
- Borderline: one of the tests for a substantial claim is unclear. 2
- The quote only partly states this claim. 1
Citations
Cites
Forterre, Y., Skotheim, J. M., Dumais, J., & Mahadevan, L. (2005) · Nature · doi:10.1038/nature03185 · Cited by 1,093 · cited 1×
“We can write the series of loop equations, defined term by term using the expansion of the transfer function of equation (4).”
MethodThe Jamming Transition and the Marginally Jammed Solid
Liu, A. J., & Nagel, S. R. (2010) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-070909-104045 · Cited by 861
Kuribayashi, K., Tsuchiya, K., You, Z., Tomus, D., Umemoto, M., Ito, T., & Sasaki, M. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.12.016 · Cited by 755
Programmable matter by folding
Hawkes, E., An, B., Benbernou, N. M., Tanaka, H., Kim, S., Demaine, E. D., Rus, D., & Wood, R. J. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0914069107 · Cited by 658
Chen, Y., Peng, R., & You, Z. (2015) · Science · doi:10.1126/science.aab2870 · Cited by 563
Origami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J.-H., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 492
Programming curvature using origami tessellations
Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L. (2016) · Nature Materials · doi:10.1038/nmat4540 · Cited by 486
Na, J., Evans, A. A., Bae, J., Chiappelli, M. C., Santangelo, C. D., Lang, R. J., Hull, T. C., & Hayward, R. C. (2015) · Advanced Materials · doi:10.1002/adma.201403510 · Cited by 452
Geometric Folding Algorithms: Linkages, Origami, Polyhedra
Demaine, E. D., & O'Rourke, J. (2007) · doi:10.1017/cbo9780511735172 · Cited by 433
Method of Packaging and Deployment of Large Membranes in Space
Miura, K. (1985) · JAXA Repository (JAXA) · Cited by 424
Research works printed but not linked: 5
- Pellegrino, S. Deployable Structures Springer (2014).
- Tachi, T. in Proceedings of Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures (eds Alberto, D. & Carlos, L.) 2295–2305 (Universidad Politecnica de Valencia, Spain, 2010).
- Merlet, J. P. Parallel Robots Springer Science & Business Media (2012).
- Bern, M. & Hayes, B. in Proceedings of the 7th Annual ACM-SIAM Symposium on Discrete Algorithms 175–183 (Atlanta, GA, USA, 1996).
- Huffman, D. A. Curvature and creases: a primer on paper. IEEE Trans. Comput. C-25, 1010–1019 (1976). · DOI · Paper page
Cited by
Multi-step self-guided pathways for shape-changing metamaterials
Coulais, C., Sabbadini, A., Vink, F., & van Hecke, M. (2018) · Nature · doi:10.1038/s41586-018-0541-0 · Cited by 250
Graphene-based bimorphs for micron-sized, autonomous origami machines
Miskin, M. Z., Dorsey, K. J., Bircan, B., Han, Y., Muller, D. A., McEuen, P. L., & Cohen, I. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712889115 · Cited by 181
Misseroni, D., Pratapa, P. P., Liu, K., Kresling, B., Chen, Y., Daraio, C., & Paulino, G. H. (2024) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00313-7 · Cited by 195
“Origami design principles have also been successfully applied to conceive origami-based metamaterials exhibiting auxetic behaviour 30,113,114 , tunable Poisson’s ratio 36,38 , self-locking 115,116 , high strength-to-weight ratio 117,118 and tunable stiffness 39,111,119,120 .”
A Review on Origami Simulations: From Kinematics, To Mechanics, Toward Multiphysics
Zhu, Y., Schenk, M., & Filipov, E. T. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055031 · Cited by 144
Learning Without Neurons in Physical Systems
Stern, M., & Murugan, A. (2023) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-040821-113439 · Cited by 177
Self-citationMetal–Organic Frameworks in Modern Physics: Highlights and Perspectives
Mezenov, Y. A., Krasilin, A. A., Dzyuba, V. P., Nominé, A., & Milichko, V. A. (2019) · Advanced Science · doi:10.1002/advs.201900506 · Cited by 107
Stacked-origami mechanical metamaterial with tailored multistage stiffness
Wen, G., Chen, G., Long, K., Wang, X., Liu, J., & Xie, Y. M. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110203 · Cited by 70
Supervised learning through physical changes in a mechanical system
Stern, M., Arinze, C., Perez, L., Palmer, S. E., & Murugan, A. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2000807117 · Cited by 81
Self-citationExploring multistability in prismatic metamaterials through local actuation
Íñiguez‐Rábago, A., Li, Y., & Overvelde, J. T. B. (2019) · Nature Communications · doi:10.1038/s41467-019-13319-7 · Cited by 72
Programming mechanical metamaterials using origami tessellations
He, Y., Zhang, P. W., You, Z., Li, Z. Q., Wang, Z., & Shu, X. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108015 · Cited by 55
Intelligent computational design of scalene-faceted flat-foldable tessellations
Chen, Y., Lu, C., Yan, J., Feng, J., & Sareh, P. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac082 · Cited by 52
An additive algorithm for origami design
Dudte, L. H., Choi, G. P. T., & Mahadevan, L. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2019241118 · Cited by 51
“Using these patterns to program rigid-foldable and flat-foldable, floppy, or multistable systems then requires consideration of additional symmetries (19) and folds (20), making quad origami a promising platform for metastructures at any scale from the nanoscopic to the architectural.”
BackgroundMulti-stability of irregular four-fold origami structures
Fan, L., Liang, J., Chen, Y., Shi, P., Feng, X., Feng, J., & Sareh, P. (2024) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2024.108993 · Cited by 48
Design and optimization of the dual-functional lattice-origami metamaterials
Jiang, T., Han, S., Han, Q., & Li, C. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117670 · Cited by 45
Sharma, A., Naskar, S., & Mukhopadhyay, T. (2025) · Advanced Science · doi:10.1002/advs.202505089 · Cited by 57
Geometric and Kinematic Analyses and Novel Characteristics of Origami-Inspired Structures
Chen, Y., Yan, J., & Feng, J. (2019) · Symmetry · doi:10.3390/sym11091101 · Cited by 46
“It has shown good prospects in wearable electronic devices, soft robots, and mechanical metamaterials [23,76].”
BackgroundShaping the topology of folding pathways in mechanical systems
Stern, M., Jayaram, V., & Murugan, A. (2018) · Nature Communications · doi:10.1038/s41467-018-06720-1 · Cited by 38
Self-citationThe complexity of folding self-folding origami
Stern, M., Pinson, M. B., & Murugan, A. (2017) · University of Chicago · doi:10.6082/a3pjx-f9q82 · Cited by 35
Self-citationHidden symmetries generate rigid folding mechanisms in periodic origami
McInerney, J., Chen, B. G., Theran, L., Santangelo, C. D., & Rocklin, D. Z. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2005089117 · Cited by 37
“[32] Matthew B Pinson, Menachem Stern, Alexandra Carruthers Ferrero, Thomas A Witten, Elizabeth Chen, and Arvind Murugan.”
BackgroundThe effect of mountain-valley folds on the rigid foldability of double corrugated pattern
Peng, R., Ma, J., & Chen, Y. (2018) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2018.06.012 · Cited by 31
Origami-inspired structures with programmable multi-step deformation
Wang, H., He, Y., Yu, A., Li, X., Gu, M., Ling, X., & Chen, G. (2022) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2022.2133197 · Cited by 31
“…[2], tunable Poisson ’ s ratio and stiffness [3 – 8], tunable thermal expansion [9], programmable and recoverable collapse [10], self-foldability [11] and self-locking [12, 13], multi-stability [5, 14 – 18] and multi-bit memory [19 – 21], which paved the way for the design of physical properties…”
BackgroundBio-Inspired Origami Metamaterials With Metastable Phases Through Mechanical Phase Transitions
Liu, K., Tachi, T., & Paulino, G. H. (2021) · Journal of Applied Mechanics · doi:10.1115/1.4050556 · Cited by 31
Harnessing the power of chemically active sheets in solution
Manna, R. K., Laskar, A., Shklyaev, O. E., & Balazs, A. C. (2021) · Nature Reviews Physics · doi:10.1038/s42254-021-00395-2 · Cited by 32
Dynamic blast loading response of sandwich beam with origami-inspired core
Peiwen, Z., Li, X., Wang, Z., Zhao, L., & Yan, X. (2018) · Results in Physics · doi:10.1016/j.rinp.2018.07.043 · Cited by 28
Low energy fold paths in multistable origami structures
Zhou, H., Grasinger, M., Buskohl, P. R., & Bhattacharya, K. (2023) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2023.112125 · Cited by 22
Learning to self-fold at a bifurcation
Arinze, C., Stern, M., Nagel, S. R., & Murugan, A. (2023) · Physical review. E · doi:10.1103/physreve.107.025001 · Cited by 27
“While many previous works have implemented creased sheets in systems ranging from graphene on the nanoscale [46] to mylar and cardboard on the mesoscale [47] to solar panels on satellites [48], these works generally have fixed stiffness in different creases and thus an inability to learn folding behaviors.”
BackgroundMethodInfluentialSelf-citationEffect of crease curvature on the bistability of the origami waterbomb base
Flores, J., Stein-Montalvo, L., & Adriaenssens, S. (2022) · Extreme Mechanics Letters · doi:10.1016/j.eml.2022.101909 · Cited by 21
Helical structures with switchable and hierarchical chirality
Feng, H., Lv, W., Ma, J., Chang, W., Chen, Y., & Wang, J. (2020) · Applied Physics Letters · doi:10.1063/5.0005336 · Cited by 19
Wu, R., Kwan, K. W., Ma, W., Wang, P., & Ngan, A. H. W. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100621 · Cited by 19
The Complexity of Folding Self-Folding Origami
Stern, M., Pinson, M. B., & Murugan, A. (2017) · Physical Review X · doi:10.1103/physrevx.7.041070 · Cited by 34
“The effect of such errors on the energy of the designed branch was discussed previously [39], but even if the pattern could still fold into the designed branch, it remains possible that the designed actuation scheme will not work.”
BackgroundInfluentialSelf-citationFrom rigid to amorphous folding behavior in origami-inspired metamaterials with bistable hinges
Íñiguez‐Rábago, A., & Overvelde, J. T. B. (2022) · Extreme Mechanics Letters · doi:10.1016/j.eml.2022.101881 · Cited by 17
Tunable polarization bandgaps and elastic wave transmission in anisotropic origami metamaterials
(2022) · doi:10.1080/17455030.2022.2091810 · Cited by 14
“…a desired platform for design of pro-gramable mechanical metamaterials with variety of unusual properties, including negative Poisson’s ratio [15–17], multi-stability [18–20], programable stiffness [21,22], self-locking [23,24], mechanical diode effect [25] and topological mechanical phase [26].”
Discrete symmetries control geometric mechanics in parallelogram-based origami
McInerney, J., Paulino, G. H., & Rocklin, D. Z. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2202777119 · Cited by 15
Excess floppy modes and multibranched mechanisms in metamaterials with symmetries
Lubbers, L. A., & van Hecke, M. (2019) · Physical review. E · doi:10.1103/physreve.100.021001 · Cited by 14
Bioinspired nonequilibrium search for novel materials
Murugan, A., & Jaeger, H. M. (2019) · MRS Bulletin · doi:10.1557/mrs.2019.22 · Cited by 10
Self-citationMcInerney, J., Misseroni, D., Rocklin, D. Z., Paulino, G. H., & Mao, X. (2025) · Nature Communications · doi:10.1038/s41467-025-57089-x · Cited by 11
“Moreover, arbitrary loads can lead to heterogeneous actuation of the mechanism 23,24 as well as undesirable deformations due to the existence of isometries distinct from the rigid folding mechanism 25 or the intersection of separate branches in the con fi guration space 26 .”
Reconfigurable origami with variable stiffness joints for adaptive robotic locomotion and grasping
Lerner, E., Chen, Z., & Zhao, J. (2024) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2024.0017 · Cited by 8
“Further, creases’ stiffness in origami can determine its folding pathway to lead to different final shapes [15].”
Stacked-origami mechanical metamaterial with tailored multistage stiffness
(2021) · doi:10.21203/rs.3.rs-849340/v1 · Cited by 6
“Due to its simple concept, fascinating characteristic, and wide application prospects, origami has aroused great interest of mathematicians, scientists and engineers in recent year [12], leading to a series of innovative designs [13-35], for instance, foldable lithium-ion battery, origami robot, foldscope, bioinspired…”
BackgroundRobust folding of elastic origami
Lee-Trimble, M. E., Kang, J., Hayward, R. C., & Santangelo, C. D. (2022) · Soft Matter · doi:10.1039/d2sm00369d · Cited by 5
Shaping dynamical folding and misfolding pathways in mechanical metamaterialsPreprint
Stern, M., Jayaram, V., & Murugan, A. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1805.04551 · Cited by 5
Self-citationTraining nonlinear elastic functions: nonmonotonic, sequence dependent and bifurcating
Hexner, D. (2021) · Soft Matter · doi:10.1039/d0sm02189j · Cited by 3
Creating Furniture-Scale Deployable Objects with a Computer-Controlled Sewing Machine
(2025) · doi:10.1145/3706598.3713735 · Cited by 2
“Folded patterns have a long history of exploration in mathematics and the arts [39], and in HCI they have been explored as interfaces [35], as lightweight and inexpensive mechanisms [42, 56], and as a basis for shape-changing fabrication [7].”
Microscopic Imprints of Learned Solutions in Tunable Networks
Guzman, M., Martins, F., Stern, M., & Liu, A. J. (2025) · Physical Review X · doi:10.1103/f2hb-c9s1 · Cited by 15
Self-citationHu, Y., Lin, L., Zheng, C., & Bi, C. (2025) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2025.113698 · Cited by 3
Origami Robotics in Biomedical Applications: A Paradigm Shift in Design and Innovation
Alzaydi, A. (2026) · Annals of Biomedical Engineering · doi:10.1007/s10439-026-04078-w · Cited by 3
Unfolding Polyhedra Method for the Design of Origami Structures with Creased Folds
Hernandez, E. A. P., Hartl, D. J., & Lagoudas, D. C. (2018) · Springer eBooks · doi:10.1007/978-3-319-91866-2_3 · Cited by 2
Moulding three-dimensional curved structures by selective heating
Jain, H., Ghosh, S., & Nitsure, N. (2020) · Royal Society Open Science · doi:10.1098/rsos.200011 · Cited by 2
Unfolding Polyhedra Method for the Design of Origami Structures with Smooth Folds
Hernandez, E. A. P., Hartl, D. J., & Lagoudas, D. C. (2018) · Springer eBooks · doi:10.1007/978-3-319-91866-2_6 · Cited by 1
Programming Boundary Deformation Patterns in Active NetworksPreprint
Qu, Z., Jiang, J., Lee, H. J., Phillips, R., Shadkhoo, S., & Thomson, M. W. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2101.08464 · Cited by 2
“[6] Matthew B Pinson, Menachem Stern, Alexandra Carruthers Ferrero, Thomas A Witten, Elizabeth Chen, and Arvind Murugan.”
BackgroundProgrammable shape transformations of electro-mechanical metamaterial muscles
Xu, K., Solymár, L., Shamonina, E., & Stevens, C. J. (2026) · Royal Society Open Science · doi:10.1098/rsos.252215
Feng, H., Lv, W., Ma, J., Chang, W., Chen, Y., & Wang, J. (2020) · Default Digital Object Group · doi:10.1063/5.0005336.2
Feng, H., Lv, W., Ma, J., Chang, W., Chen, Y., & Wang, J. (2020) · Default Digital Object Group · doi:10.1063/5.0005336.1
Metadata
- Authors
- Pinson, M. B., Stern, M., Carruthers Ferrero, A., Witten, T. A., Chen, E., & Murugan, A.
- Affiliations
- University of Chicago (US)
- Harvard University (US)
- Corresponding author
- Murugan, Arvind
- Venue
- Nature Communications
- Published
- 2017-05-18
- Volume
- 8
- Issue
- 1
- Pages
- 15477-15477
- ISSN
- 2041-1723 (ISSN-L)
- PMC
- PMC5454341
- OpenAlex
- W2614110017
- Cited by
- 56
- References
- 38
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 3 · 2023: 5 · 2022: 9 · 2021: 6 · 2020: 8 · 2019: 5 · 2018: 8 · 2017: 2
- FWCI
- 5.31
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Nature Communications (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Digital Access to Scholarship at Harvard (DASH) (Harvard University) (submittedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Science Foundation (1204686)
- ConocoPhillips
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Analysis and Optimization
- Keywords
- crease patterns, folding energy, Miura-ori, origami design, metamaterials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.