The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
Open accessAbstract
The excellent cryogenic tensile properties of the CrMnFeCoNi alloy are generally caused by deformation twinning, which is difficult to achieve at room temperature because of insufficient stress for twinning. Here, we induced twinning at room temperature to improve the cryogenic tensile properties of the CrMnFeCoNi alloy. Considering grain size effects on the critical stress for twinning, twins were readily formed in the coarse microstructure by cold rolling without grain refinement by hot rolling. These twins were retained by partial recrystallization and played an important role in improving strength, allowing yield strengths approaching 1 GPa. The persistent elongation up to 46% as well as the tensile strength of 1.3 GPa are attributed to additional twinning in both recrystallized and non-recrystallization regions. Our results demonstrate that non-recrystallized grains, which are generally avoided in conventional alloys because of their deleterious effect on ductility, can be useful in achieving high-strength high-entropy alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
The Thermo-Calc databank system
Sundman, B., Jansson, B., & Andersson, J.-O. (1985) · Calphad · doi:10.1016/0364-5916(85)90021-5 · Cited by 3,343
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Williams, J. C., & Starke, E. A. (2003) · Acta Materialia · doi:10.1016/j.actamat.2003.08.023 · Cited by 2,342
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Heterostructured materials: superior properties from hetero-zone interaction
Zhu, Y., Ameyama, K., Anderson, P. M., Beyerlein, I. J., Gao, H., Kim, H. S., Lavernia, E., Mathaudhu, S., Mughrabi, H., Ritchie, R. O., et al. (2021) · Materials Research Letters · doi:10.1080/21663831.2020.1796836 · Cited by 1,143
Self-citationChoi, W.-M., Jo, Y. H., Sohn, S. S., Lee, S., & Lee, B.-J. (2018) · npj Computational Materials · doi:10.1038/s41524-017-0060-9 · Cited by 794
Self-citationHigh-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Self-citationHierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Wu, S. W., Wang, G., Wang, Q., Jia, Y. D., Yi, J., Zhai, Q. J., Liu, J. B., Sun, B. A., Chu, H. J., Shen, J., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.012 · Cited by 640
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Synthesis of high-entropy alloy nanoparticles on supports by the fast moving bed pyrolysis
Gao, S., Hao, S., Huang, Z., Yuan, Y., Han, S., Lei, L., Zhang, X., Shahbazian-Yassar, R., & Lu, J. (2020) · Nature Communications · doi:10.1038/s41467-020-15934-1 · Cited by 533
High‐Entropy Alloys: Potential Candidates for High‐Temperature Applications – An Overview
Praveen, S., & Kim, H. S. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700645 · Cited by 526
Self-citationNatural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility
Wei, S., Kim, S. J., Kang, J., Zhang, Y., Zhang, Y., Furuhara, T., Park, E. S., & Tasan, C. C. (2020) · Nature Materials · doi:10.1038/s41563-020-0750-4 · Cited by 503
Chen, S., Aitken, Z. H., Pattamatta, S., Wu, Z., Yu, Z. G., Srolovitz, D. J., Liaw, P. K., & Zhang, Y.-W. (2021) · Nature Communications · doi:10.1038/s41467-021-25264-5 · Cited by 392
Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys
Yin, B., Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.01.062 · Cited by 338
Design of D022 superlattice with superior strengthening effect in high entropy alloys
He, F., Chen, D., Han, B., Wu, Q., Wang, Z., Wei, S., Wei, D., Wang, J., Liu, C. T., & Kai, J.-J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.048 · Cited by 322
Park, J. M., Moon, J., Bae, J. W., Jang, M. J., Park, J., Lee, S., & Kim, H. S. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.02.031 · Cited by 290
Self-citationRecent progress in high-entropy alloys for catalysts: synthesis, applications, and prospects
Li, K., & Chen, W. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100638 · Cited by 275
Wang, S., Wu, M., Shu, D., Zhu, G., Wang, D., & Sun, B. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.10.044 · Cited by 272
MXene‐ZnO Memristor for Multimodal In‐Sensor Computing
Wang, Y., Gong, Y., Yang, L., Xiong, Z., Lv, Z., Xing, X., Zhou, Y., Zhang, B., Su, C., Liao, Q., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100144 · Cited by 257
Shearing brittle intermetallics enhances cryogenic strength and ductility of steels
Wang, F., Song, M., Elkot, M. N., Yao, N., Sun, B., Song, M., Wang, Z., & Raabe, D. (2024) · Science · doi:10.1126/science.ado2919 · Cited by 253
Metadata
- Authors
- Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S.
- Venue
- Nature Communications
- Published
- 2017-06-12
- Volume
- 8
- Issue
- 1
- Pages
- 15719-15719
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2623784365
- Cited by
- 470
- References
- 29
- FWCI
- 24.47
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.