The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
Open accessAbstract
The excellent cryogenic tensile properties of the CrMnFeCoNi alloy are generally caused by deformation twinning, which is difficult to achieve at room temperature because of insufficient stress for twinning. Here, we induced twinning at room temperature to improve the cryogenic tensile properties of the CrMnFeCoNi alloy. Considering grain size effects on the critical stress for twinning, twins were readily formed in the coarse microstructure by cold rolling without grain refinement by hot rolling. These twins were retained by partial recrystallization and played an important role in improving strength, allowing yield strengths approaching 1 GPa. The persistent elongation up to 46% as well as the tensile strength of 1.3 GPa are attributed to additional twinning in both recrystallized and non-recrystallization regions. Our results demonstrate that non-recrystallized grains, which are generally avoided in conventional alloys because of their deleterious effect on ductility, can be useful in achieving high-strength high-entropy alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
The Thermo-Calc databank system
Sundman, B., Jansson, B., & Andersson, J.-O. (1985) · Calphad · doi:10.1016/0364-5916(85)90021-5 · Cited by 3,343
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Williams, J. C., & Starke, E. A. (2003) · Acta Materialia · doi:10.1016/j.actamat.2003.08.023 · Cited by 2,342
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819
The onset of twinning in metals: a constitutive description
Meyers, M. A., Vöhringer, O., & Lubarda, V. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00300-7 · Cited by 1,695
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Otto, F., Dlouhý, A., Pradeep, K. G., Kuběnová, M., Raabe, D., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.005 · Cited by 932
Wu, Z., Bei, H., Otto, F., Pharr, G. M., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.10.024 · Cited by 909
Senkov, O. N., Senkova, S. V., Woodward, C., & Miracle, D. B. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.032 · Cited by 674
Chen, Y. Y., Duval, T., Hung, U. D., Yeh, J. W., & Shih, H. C. (2005) · Corrosion Science · doi:10.1016/j.corsci.2004.11.008 · Cited by 655
Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution
Hsu, Y.-J., Chiang, W.-C., & Wu, J.-K. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.01.001 · Cited by 655
Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2015) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 645
Wang, Z., Baker, I., Cai, Z., Chen, S., Poplawsky, J. D., & Guo, W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.08.072 · Cited by 542
Li, D., Li, C., Feng, T., Zhang, Y., Sha, G., Lewandowski, J. J., Liaw, P. K., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.10.038 · Cited by 532
Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy
Stepanov, N., Tikhonovsky, M., Yurchenko, N., Zyabkin, D., Klimova, M., Zherebtsov, S., Efimov, A., & Salishchev, G. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.12.004 · Cited by 399
Li, C., Li, J. C., Zhao, M., & Jiang, Q. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.07.124 · Cited by 371
Kikuchi, S. (1990) · Journal of the Society of Materials Science Japan · Cited by 353
Li, D., & Zhang, Y. (2016) · Intermetallics · doi:10.1016/j.intermet.2015.11.002 · Cited by 346
Microstructure and Compressive Properties of NbTiVTaAlx High Entropy Alloys
Yang, X., Zhang, Y., & Liaw, P. K. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.03.043 · Cited by 283
Single-phase high-entropy alloys – an overview
Kozak, R., Sologubenko, A., & Steurer, W. (2015) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1515/zkri-2014-1739 · Cited by 187
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Self-citationHierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Wu, S. W., Wang, G., Wang, Q., Jia, Y. D., Yi, J., Zhai, Q. J., Liu, J. B., Sun, B. A., Chu, H. J., Shen, J., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.012 · Cited by 640
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Metadata
- Authors
- Jo, Y. H., Jung, S., Choi, W. M., Sohn, S. S., Kim, H. S., Lee, B. J., Kim, N. J., & Lee, S.
- Venue
- Nature Communications
- Published
- 2017-06-12
- Volume
- 8
- Issue
- 1
- Pages
- 15719-15719
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2623784365
- Cited by
- 470
- References
- 29
- FWCI
- 24.47
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
