The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Synergistic toughening of composite fibres by self-alignment of reduced graphene oxide and carbon nanotubes
Open accessAbstract
The extraordinary properties of graphene and carbon nanotubes motivate the development of methods for their use in producing continuous, strong, tough fibres. Previous work has shown that the toughness of the carbon nanotube-reinforced polymer fibres exceeds that of previously known materials. Here we show that further increased toughness results from combining carbon nanotubes and reduced graphene oxide flakes in solution-spun polymer fibres. The gravimetric toughness approaches 1,000 J g−1, far exceeding spider dragline silk (165 J g−1) and Kevlar (78 J g−1). This toughness enhancement is consistent with the observed formation of an interconnected network of partially aligned reduced graphene oxide flakes and carbon nanotubes during solution spinning, which act to deflect cracks and allow energy-consuming polymer deformation. Toughness is sensitive to the volume ratio of the reduced graphene oxide flakes to the carbon nanotubes in the spinning solution and the degree of graphene oxidation. The hybrid fibres were sewable and weavable, and could be shaped into high-modulus helical springs. Composite fibres made of polymers reinforced by carbon nanotubes are known for their exceptional toughness. Shinet al. make these composites even tougher, by self-aligning carbon nanotubes and reduced graphene oxide flakes within the polymer matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Cited by
The mechanics of graphene nanocomposites: A review
Young, R. J., Kinloch, I. A., Gong, L., & Novoselov, K. S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.05.005 · Cited by 1,294
Highly thermally conductive and mechanically strong graphene fibers
Xin, G., Yao, T., Sun, H., Scott, S. M., Shao, D., Wang, G., & Lian, J. (2015) · Science · doi:10.1126/science.aaa6502 · Cited by 740
Graphene-based materials for tissue engineering
Shin, S. R., Li, Y.-C., Jang, H. L., Khoshakhlagh, P., Akbari, M., Nasajpour, A., Zhang, Y. S., Tamayol, A., & Khademhosseini, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.007 · Cited by 721
Ultrastrong Fibers Assembled from Giant Graphene Oxide Sheets
Xu, Z., Sun, H., Zhao, X., & Gao, C. (2013) · Advanced Materials · doi:10.1002/adma.201203448 · Cited by 699
Superstructured Assembly of Nanocarbons: Fullerenes, Nanotubes, and Graphene
Li, Z., Liu, Z., Sun, H., & Gao, C. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00102 · Cited by 554
Metadata
- Authors
- Shin, M. K., Lee, B., Kim, S. H., Lee, J. A., Spinks, G. M., Gambhir, S., Wallace, G. G., Kozlov, M. E., Baughman, R. H., & Kim, S. J.
- Venue
- Nature Communications
- Published
- 2012-01-31
- Volume
- 3
- Issue
- 1
- Pages
- 650-650
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2058285177
- Cited by
- 423
- References
- 1
- FWCI
- 15.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.