The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
A porous metal-organic framework with ultrahigh acetylene uptake capacity under ambient conditions
Open accessAbstract
Acetylene, an important petrochemical raw material, is very difficult to store safely under compression because of its highly explosive nature. Here we present a porous metal-organic framework named FJI-H8, with both suitable pore space and rich open metal sites, for efficient storage of acetylene under ambient conditions. Compared with existing reports, FJI-H8 shows a record-high gravimetric acetylene uptake of 224 cm 3 (STP) g−1 and the second-highest volumetric uptake of 196 cm 3 (STP) cm−3 at 295 K and 1 atm. Increasing the storage temperature to 308 K has only a small effect on its acetylene storage capacity (∼200 cm 3 (STP) g−1). Furthermore, FJI-H8 exhibits an excellent repeatability with only 3.8% loss of its acetylene storage capacity after five cycles of adsorption–desorption tests. Grand canonical Monte Carlo simulation reveals that not only open metal sites but also the suitable pore space and geometry play key roles in its remarkable acetylene uptake.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sheldrick, G. M. (2008) · Acta Crystallographica Section A Foundations of Crystallography · doi:10.1107/s0108767307043930 · Cited by 87,804
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Single-crystal structure validation with the program PLATON
Spek, A. L. (2003) · Journal of Applied Crystallography · doi:10.1107/s0021889802022112 · Cited by 14,084
UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations
Rappe, A. K., Casewit, C. J., Colwell, K. S., Goddard, W. A., & Skiff, W. M. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00051a040 · Cited by 10,557
Breneman, C. M., & Wiberg, K. B. (1990) · Journal of Computational Chemistry · doi:10.1002/jcc.540110311 · Cited by 4,790
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Applied Topological Analysis of Crystal Structures with the Program Package ToposPro
Blatov, V. A., Shevchenko, A. P., & Proserpio, D. M. (2014) · Crystal Growth & Design · doi:10.1021/cg500498k · Cited by 3,167
Optimized intermolecular potential functions for liquid hydrocarbons
Jorgensen, W. L., Madura, J. D., & Swenson, C. J. (1984) · Journal of the American Chemical Society · doi:10.1021/ja00334a030 · Cited by 2,356
Farha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
Cited by
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Recent advances in gas storage and separation using metal–organic frameworks
Li, H., Wang, K., Sun, Y., Lollar, C. T., Li, J., & Zhou, H.-C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.006 · Cited by 1,571
Kökçam-Demir, Ü., Goldman, A., Esrafili, L., Gharib, M., Morsali, A., Weingart, O., & Janiak, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00609e · Cited by 895
Porous metal-organic frameworks for gas storage and separation: Status and challenges
Li, H., Li, L., Lin, R.-B., Zhou, W., Zhang, Z., Xiang, S., & Chen, B. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100006 · Cited by 891
Isoreticular chemistry within metal–organic frameworks for gas storage and separation
Fan, W., Zhang, X., Kang, Z., Liu, X., & Sun, D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.213968 · Cited by 584
Metal–organic frameworks meet scalable and sustainable synthesis
Julien, P. A., Mottillo, C., & Friščić, T. (2017) · Green Chemistry · doi:10.1039/c7gc01078h · Cited by 520
Pore Space Partition within a Metal–Organic Framework for Highly Efficient C2H2/CO2 Separation
Ye, Y., Ma, Z., Lin, R.-B., Krishna, R., Zhou, W., Lin, Q., Zhang, Z., Xiang, S., & Chen, B. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00232 · Cited by 479
Benchmark C2H2/CO2 and CO2/C2H2 Separation by Two Closely Related Hybrid Ultramicroporous Materials
Chen, K.-J., Scott, H. S., Madden, D. G., Pham, T., Kumar, A., Bajpai, A., Lusi, M., Forrest, K. A., Space, B., Perry, J. J., et al. (2016) · Chem · doi:10.1016/j.chempr.2016.10.009 · Cited by 449
Pei, J., Shao, K., Wang, J., Wen, H., Yang, Y., Cui, Y., Krishna, R., Li, B., & Qian, G. (2020) · Advanced Materials · doi:10.1002/adma.201908275 · Cited by 385
Ye, Y., Xian, S., Cui, H., Tan, K., Gong, L., Liang, B., Pham, T., Pandey, H., Krishna, R., Lan, P. C., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c10620 · Cited by 359
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Progress and potential of metal-organic frameworks (MOFs) for gas storage and separation: A review
Jia, T., Gu, Y., & Li, F. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108300 · Cited by 356
Huang, G., Yang, Q., Xu, Q., Yu, S., & Jiang, H. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201600497 · Cited by 335
Rational strategies for proton-conductive metal–organic frameworks
Lim, D.-W., & Kitagawa, H. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00004g · Cited by 334
Progress & prospect of metal-organic frameworks (MOFs) for enzyme immobilization (enzyme/MOFs)
Hu, Y., Dai, L., Liu, D., Du, W., & Wang, Y. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.103 · Cited by 290
Xue, D.-X., Wang, Q., & Bai, J. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.10.026 · Cited by 280
An ultra-tunable platform for molecular engineering of high-performance crystalline porous materials
Zhai, Q.-G., Bu, X., Mao, C., Zhao, X., Daemen, L., Cheng, Y., Ramirez-Cuesta, A. J., & Feng, P. (2016) · Nature Communications · doi:10.1038/ncomms13645 · Cited by 279
Wu, D., Zhang, P.-F., Yang, G.-P., Hou, L., Zhang, W.-Y., Han, Y.-F., Liu, P., & Wang, Y.-Y. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213709 · Cited by 271
Fluorinated metal–organic frameworks for gas separation
Ebadi Amooghin, A., Sanaeepur, H., Luque, R., Garcia, H., & Chen, B. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00442a · Cited by 271
Porous metal–organic frameworks for fuel storage
He, Y., Chen, F., Li, B., Qian, G., Zhou, W., & Chen, B. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.10.002 · Cited by 267
Hu, Y., Ding, M., Liu, X.-Q., Sun, L.-B., & Jiang, H.-L. (2016) · Chemical Communications · doi:10.1039/c6cc01597b · Cited by 261
A high-density carbon fiber neural recording array technology
Massey, T. L., Santacruz, S. R., Hou, J. F., Pister, K. S. J., Carmena, J. M., & Maharbiz, M. M. (2019) · Journal of Neural Engineering · doi:10.1088/1741-2552/aae8d9 · Cited by 58
Metadata
- Authors
- Pang, J., Jiang, F., Wu, M., Liu, C., Su, K., Lu, W., Yuan, D., & Hong, M.
- Venue
- Nature Communications
- Published
- 2015-06-30
- Volume
- 6
- Issue
- 1
- Pages
- 7575-7575
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2270703038
- Cited by
- 316
- References
- 46
- FWCI
- 15.95
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.