Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 182

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

A highly sensitive and moisture-resistant gas sensor for diabetes diagnosis with Pt@In2O3 nanowires and a molecular sieve for protection

Open access
Liu, Wei, Xu, Lin, Sheng, Kuang, Zhou, Xiangyu, Dong, Biao, Lu, Geyu, Song, Hongwei·2018·NPG Asia Materials

Abstract

Sensitive and selective detection of acetone in human exhaled breath plays an important role in the diagnosis of diabetes. However, obtaining a reliable response to ppb levels of acetone and avoiding cross-sensitivity due to the large amount of moisture in exhaled breath are still great challenges. In this work, a type of acetone sensor with ultrahigh sensitivity and moisture resistance is reported. Electrospun In2O3 nanowires with a controllable Pt core (Pt@In2O3 core-shell nanowires) are designed and prepared as sensitive layers. A mesoporous silica molecular sieve is further integrated as the moisture filter layer. The Pt@In2O3 core-shell nanowire-based sensor exhibits a highly improved response compared with a sensor based on pure In2O3 nanowires due to the probable increase in surface resistance and the introduction of p–n junctions after rational design of the structure. In addition, a good performance in terms of the fast dynamic process, selectivity and long-term stability is also achieved, and the detection limit can be as low as 10 ppb, which is much lower than the concentration level of 1.8 ppm in the exhaled breath of diabetic patients. The influence of the large amount of moisture is greatly weakened by using the molecular sieve as a moisture filter layer, leading to much improved sensitivity in clinical sample detection among healthy and diabetic patients. Based on the optimized composite structure of the Pt@In2O3 core-shell nanowire sensor and moisture filter layer, a simple portable sensing prototype is successfully fabricated. The reported Pt@In2O3 core-shell nanowires and the acetone sensing approach open up a new opportunity for a simple, inexpensive, and noninvasive diagnosis of diabetes. Portable sensors containing metallic nanowires and moisture-absorbing desiccants can spot critical levels of a diabetes biomarker in human breath. Recent studies show that an acetone concentration of 1.8 parts per million in exhaled breath implies high diabetes risk. Lin Xu and co-workers from Jilin University, Changchun, China, report a one-step preparation of acetone-sensitive nanomaterials. By forcing reagents through thin needles, the team produced iridium oxide nanowires with a solid core of pure platinum, a combination that makes the nanowires’ surface unusually sensitive to resistance changes due to foreign particles. At specific operating temperatures, the nanowires swiftly detected acetone absorption at levels as low as 10 parts per billion. A prototype containing the nanowires and a water-trapping film of molecular sieves made it possible to distinguish healthy people from those with diabetes simply by collecting breath samples. In this work, electrospun In2O3 nanowires with controllable Pt core were designed and prepared as an ultra-sensitive layer with good electron transmission ability as well as high surface area, and then SBA-15 molecular sieve was further integrated as a moisture filter layer. The as-design device was successfully used to detect trace acetone biomarker in exhaled breath, which could accurately distinguish the health people from diabetes in clinical samples.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41427-018-0029-2

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 3 references

Cited by

See all 182

Metadata

Authors
Liu, W., Xu, L., Sheng, K., Zhou, X., Dong, B., Lu, G., & Song, H.
Venue
NPG Asia Materials
Published
2018-04
Volume
10
Issue
4
Pages
293-308
ISSN
  • 1884-4049 (ISSN-L)
  • 1884-4057
OpenAlex
W2801247897
Cited by
182
References
3
FWCI
6.59
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A highly sensitive and moisture-resistant gas sensor for diabetes diagnosis with Pt@In2O3 nanowires and a molecular sieve for protection. https://app.cochat.ai/papers/10.1038/s41427-018-0029-2
The paper
Liu, W., Xu, L., Sheng, K., Zhou, X., Dong, B., Lu, G., & Song, H. (2018). A highly sensitive and moisture-resistant gas sensor for diabetes diagnosis with Pt@In2O3 nanowires and a molecular sieve for protection. NPG Asia Materials. https://doi.org/10.1038/s41427-018-0029-2

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.