The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Tailoring force sensitivity and selectivity by microstructure engineering of multidirectional electronic skins
Open accessAbstract
Electronic skins (e-skins) with high sensitivity to multidirectional mechanical stimuli are crucial for healthcare monitoring devices, robotics, and wearable sensors. In this study, we present piezoresistive e-skins with tunable force sensitivity and selectivity to multidirectional forces through the engineered microstructure geometries (i.e., dome, pyramid, and pillar). Depending on the microstructure geometry, distinct variations in contact area and localized stress distribution are observed under different mechanical forces (i.e., normal, shear, stretching, and bending), which critically affect the force sensitivity, selectivity, response/relaxation time, and mechanical stability of e-skins. Microdome structures present the best force sensitivities for normal, tensile, and bending stresses. In particular, microdome structures exhibit extremely high pressure sensitivities over broad pressure ranges (47,062 kPa−1 in the range of <1 kPa, 90,657 kPa−1 in the range of 1–10 kPa, and 30,214 kPa−1 in the range of 10–26 kPa). On the other hand, for shear stress, micropillar structures exhibit the highest sensitivity. As proof-of-concept applications in healthcare monitoring devices, we show that our e-skins can precisely monitor acoustic waves, breathing, and human artery/carotid pulse pressures. Unveiling the relationship between the microstructure geometry of e-skins and their sensing capability would provide a platform for future development of high-performance microstructured e-skins. Customizing piezoresistive sensors with different microscale geometries makes it easier for ‘electronic skin’ devices to sense forces in different directions. Hyunhyub Ko and colleagues from South Korea’s Ulsan National Institute of Science and Technology report that carbon nanotube/silicone elastomer composites fabricated into three shapes—micro-domes, pyramids, and pillars—have unique responses to mechanical stress and deformations. Experiments with interlocked pairs of micropatterned films revealed hemispherical shapes were best at sensing tensile and bending stresses, as well as minute changes to pressure. Micropillars, on the other hand, exhibited strong sensitivity to shear stress. With help from computer simulations, the researchers identified changes in contact area and localized stress as the critical factors needed to guide design of multidirectional force sensitivity. Prototype e-skin devices containing the interlocked microshapes successfully monitored bio-signals including breath patterns, spoken words, and arterial blood pressure. We present piezoresistive electronic skins with tunable force sensitivity and selectivity in response to multidirectional forces (normal, shear, tensile, bending) by engineering microstructure geometries (dome, pyramid, pillar). Microdome structures present the best force sensitivities for normal, tensile, and bending stresses. On the other hand, for shear stress, micropillar structures exhibit the highest sensitivity. As proof-of-concept demonstrations, the e-skins are used for wearable healthcare devices to precisely monitor various bio-signals including sound, human breath, and artery/carotid pulse pressures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
Pang, C., Lee, G.-Y., Kim, T.-I., Kim, S. M., Kim, H. N., Ahn, S.-H., & Suh, K.-Y. (2012) · Nature Materials · doi:10.1038/nmat3380 · Cited by 1,695
Self-citationAdvances of flexible pressure sensors toward artificial intelligence and health care applications
Zang, Y., Zhang, F., Di, C.-A., & Zhu, D. (2015) · Materials Horizons · doi:10.1039/c4mh00147h · Cited by 1,272
Park, J., Lee, Y., Hong, J., Ha, M., Jung, Y.-D., Lim, H., Kim, S. Y., & Ko, H. (2014) · ACS Nano · doi:10.1021/nn500441k · Cited by 915
Self-citationPark, J., Lee, Y., Hong, J., Lee, Y., Ha, M., Jung, Y., Lim, H., Kim, S. Y., & Ko, H. (2014) · ACS Nano · doi:10.1021/nn505953t · Cited by 649
Self-citationCapacitive Epidermal Electronics for Electrically Safe, Long‐Term Electrophysiological Measurements
Jeong, J., Kim, M. K., Cheng, H., Yeo, W., Huang, X., Liu, Y., Zhang, Y., Huang, Y., & Rogers, J. A. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201300334 · Cited by 288
Cited by
Xiong, Y., Shen, Y., Tian, L., Hu, Y., Zhu, P., Sun, R., & Wong, C.-P. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104436 · Cited by 548
Emerging Technologies of Flexible Pressure Sensors: Materials, Modeling, Devices, and Manufacturing
Huang, Y., Fan, X., Chen, S., & Zhao, N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808509 · Cited by 543
Mimicking Human and Biological Skins for Multifunctional Skin Electronics
Lee, Y., Park, J., Choe, A., Cho, S., Kim, J., & Ko, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904523 · Cited by 465
Self-citationSelf-healing conductive hydrogels: preparation, properties and applications
Deng, Z., Wang, H., Ma, P. X., & Guo, B. (2020) · Nanoscale · doi:10.1039/c9nr09283h · Cited by 385
Wearable Pressure Sensors Based on MXene/Tissue Papers for Wireless Human Health Monitoring
Yang, L., Wang, H., Yuan, W., Li, Y., Gao, P., Tiwari, N., Chen, X., Wang, Z., Niu, G., & Cheng, H. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c22001 · Cited by 283
Metadata
- Authors
- Park, J., Kim, J., Hong, J., Lee, H., Lee, Y., Cho, S., Kim, S.-W., Kim, J. J., Kim, S. Y., & Ko, H.
- Venue
- NPG Asia Materials
- Published
- 2018-04
- Volume
- 10
- Issue
- 4
- Pages
- 163-176
- ISSN
- 1884-4049 (ISSN-L)
- 1884-4057
- OpenAlex
- W2798077742
- Cited by
- 228
- References
- 6
- FWCI
- 7.74
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tailoring force sensitivity and selectivity by microstructure engineering of multidirectional electronic skins. https://app.cochat.ai/papers/10.1038/s41427-018-0031-8
- The paper
- Park, J., Kim, J., Hong, J., Lee, H., Lee, Y., Cho, S., Kim, S.-W., Kim, J. J., Kim, S. Y., & Ko, H. (2018). Tailoring force sensitivity and selectivity by microstructure engineering of multidirectional electronic skins. NPG Asia Materials. https://doi.org/10.1038/s41427-018-0031-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.