CoChat

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index; 8 of the 29 sources its claims cite were checked for support.

Enhanced analog synaptic behavior of SiNx/a-Si bilayer memristors through Ge implantation

Open access

Abstract

Abstract Conductive bridging random access memory (CBRAM) has been considered to be a promising emerging device for artificial synapses in neuromorphic computing systems. Good analog synaptic behaviors, such as linear and symmetric synapse updates, are desirable to provide high learning accuracy. Although numerous efforts have been made to develop analog CBRAM for years, the stochastic and abrupt formation of conductive filaments hinders its adoption. In this study, we propose a novel approach to enhance the synaptic behavior of a SiN x /a-Si bilayer memristor through Ge implantation. The SiN x and a-Si layers serve as switching and internal current limiting layers, respectively. Ge implantation induces structural defects in the bulk and surface regions of the a-Si layer, enabling spatially uniform Ag migration and nanocluster formation in the upper SiN x layer and increasing the conductance of the a-Si layer. As a result, the analog synaptic behavior of the SiN x /a-Si bilayer memristor, such as the nonlinearity, on/off ratio, and retention time, is remarkably improved. An artificial neural network simulation shows that the neuromorphic system with the implanted SiN x /a-Si memristor provides a 91.3% learning accuracy mainly due to the improved linearity.

Overview

CoChat Summary

TL;DR

Ge ion implantation into the a-Si underlayer of SiN\(_x\)/a-Si CBRAM memristors improved analog synaptic behavior by making Ag cluster formation more uniform, increasing conductance, and reducing update nonlinearity. In an MNIST neural-network simulation, the implanted device reached 91.3% learning accuracy versus 62.8% for the unimplanted device.

Key findings

  • Ge implantation at a dose of \(1.0 \times 10^{16}\) cm\(^{-2}\) increased the device current by approximately two orders of magnitude and made the I–V curve more symmetrical.
  • In potentiation/depression tests, the implanted device showed gradual conductance changes in both positive and negative bias regions, whereas the unimplanted device showed gradual changes only in the positive bias region.
  • TEM/STEM showed that Ag nanoclusters were randomly distributed throughout the SiN\(_x\) layer in the implanted device, while the unimplanted device had Ag nanoclusters mainly at the SiN\(_x\)/a-Si interface; the unimplanted interface clusters averaged 5.91 nm (\(\pm\)1.37 nm), while implanted clusters averaged 2.84 nm (\(\pm\)1.96 nm).
  • The implanted device had better synaptic metrics: the on/off ratio was much greater than the unimplanted device across pulse counts, retention time constants reached \(10^3\)–\(10^4\) s, and MNIST accuracy improved to 91.3% with 500 conductance states after 100 epochs, versus 62.8% for the unimplanted device with 100 conductance levels.

Methods

  • Fabricated via-hole memristors with structure (Ag TE)/SiN\(_x\)/a-Si/(p\(^ {++}\)-Si bottom electrode), with a 78-nm LPCVD a-Si layer, a 9–20-nm PECVD SiN\(_x\) switching layer, and Ge implantation into the a-Si layer before SiN\(_x\) deposition.
  • Performed electrical testing with DC I–V sweeps from 0 to \(\pm\)5 V, pulse-based potentiation/depression measurements, retention tests after 500 pulses, and endurance tests over 500 cycles.
  • Used XTEM/STEM/EDX to examine Ag nanocluster morphology and Ge distribution, TRIM simulations to model implantation depth and vacancy defects, and an MLP-based MNIST simulation using experimentally measured synapse-update nonlinearities.

Limitations

  • The paper states that “further study is needed” to clarify whether the chemical effect of implanted Ge is negligible, so the mechanism is not fully resolved.
  • The text makes evident that the implanted device still shows some cycle-to-cycle and device-to-device variation, even though implantation reduced it.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41427-020-00261-0

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Fabrication of SiN x /a-Si bilayer memristors. a Schematic view of a memristor device with a via-hole structure. b Fabrication process fl ow of SiN x /a-Si memristor devices. The implanted device underwent Ge implantation at a dose of 1.0 × 10 16 /cm 2 . The fi rst SiN x fi lm is for insulating with a 100-nm thickness, and the second SiN x fi lm is for switching with an ultrathin thickness <20 nm.
Fig. 1 Fabrication of SiN x /a-Si bilayer memristors. a Schematic view of a memristor device with a via-hole structure. b Fabrication process fl ow of SiN x /a-Si memristor devices. The implanted device underwent Ge implantation at a dose of 1.0 × 10 16 /cm 2 . The fi rst SiN x fi lm is for insulating with a 100-nm thickness, and the second SiN x fi lm is for switching with an ultrathin thickness <20 nm.From the PDF
Image 2
From the PDF
Image 3
From the PDF
Image 4
From the PDF
Fig. 5 Device size dependency. a Characteristic current -voltage curves of the implanted devices with varying via-hole size. b R vs. via-hole size of the implanted devices. The resistance ( R ) values were determined at a bias of 1.0 V.
Fig. 5 Device size dependency. a Characteristic current -voltage curves of the implanted devices with varying via-hole size. b R vs. via-hole size of the implanted devices. The resistance ( R ) values were determined at a bias of 1.0 V.From the PDF
Fig. 6 Synpatic potentiation and depression. a Conductance updates of the unimplanted device with varying number of pulses (50, 100, 200, 500). The write voltages in potentiation and depression were 7.0 and -3.0 V, respectively. The read voltage was 2.0 V in both modes. b Conductance updates of the implanted device with the same numbers of pulses. The write and read voltages were 7.0 and -3.0 V. The read voltage was 1.0 V in both modes. c Repetitive potentiation and depression curves with 100 repetitive pulses in each mode. The write voltages were 7.0 and -4.0 V in potentiation and depression, respectively. The read voltage was 1.0 V in both modes. The potentiation and depression curves of every tenth cycle are presented. In all cases, the pulse width was set to 10 ms.
Fig. 6 Synpatic potentiation and depression. a Conductance updates of the unimplanted device with varying number of pulses (50, 100, 200, 500). The write voltages in potentiation and depression were 7.0 and -3.0 V, respectively. The read voltage was 2.0 V in both modes. b Conductance updates of the implanted device with the same numbers of pulses. The write and read voltages were 7.0 and -3.0 V. The read voltage was 1.0 V in both modes. c Repetitive potentiation and depression curves with 100 repetitive pulses in each mode. The write voltages were 7.0 and -4.0 V in potentiation and depression, respectively. The read voltage was 1.0 V in both modes. The potentiation and depression curves of every tenth cycle are presented. In all cases, the pulse width was set to 10 ms.From the PDF
Fig. 7 Long term memory retention time. a Selected conductance decay curves after repetitive voltage (7.0 V) pulses with a 100-ms width for the unimplanted and implanted devices. The applied number of pulses was 500 for the unimplanted device and was 50, 100, 500, and 1000 for the implanted device. b Retention time constants extracted from the conductance decay curves for the unimplanted and implanted devices with varying voltage amplitude (5.0, 6.0, 7.0 V) and number of pulses. The voltage pulse width was set to 100 ms.
Fig. 7 Long term memory retention time. a Selected conductance decay curves after repetitive voltage (7.0 V) pulses with a 100-ms width for the unimplanted and implanted devices. The applied number of pulses was 500 for the unimplanted device and was 50, 100, 500, and 1000 for the implanted device. b Retention time constants extracted from the conductance decay curves for the unimplanted and implanted devices with varying voltage amplitude (5.0, 6.0, 7.0 V) and number of pulses. The voltage pulse width was set to 100 ms.From the PDF
Fig. 8 Proposed operation mechanism. Schematics of Ag nanoclusters in the SiN x layer immediately after potentiation with multiple voltage pulses of the a unimplanted devices and b implanted devices. Schematics of Ag nanoclusters at a time comparable to the short time constant ( τ short ) after voltage pulses are removed for the c unimplanted and d implanted devices.
Fig. 8 Proposed operation mechanism. Schematics of Ag nanoclusters in the SiN x layer immediately after potentiation with multiple voltage pulses of the a unimplanted devices and b implanted devices. Schematics of Ag nanoclusters at a time comparable to the short time constant ( τ short ) after voltage pulses are removed for the c unimplanted and d implanted devices.From the PDF
Fig. 9 MNIST recognition accuracy of the memristive neural network. a Schematic illustration of the MLP neural network for an MNIST pattern recognition test. b Learning accuracy of the neuromorphic system with the analog memristors after 100 epochs of training. The nonlinear synapse updates in Table 1 are considered in the simulation. The number of conductance states for the analog memristors is varied from 50 to 100, 200, and 500.
Fig. 9 MNIST recognition accuracy of the memristive neural network. a Schematic illustration of the MLP neural network for an MNIST pattern recognition test. b Learning accuracy of the neuromorphic system with the analog memristors after 100 epochs of training. The nonlinear synapse updates in Table 1 are considered in the simulation. The number of conductance states for the analog memristors is varied from 50 to 100, 200, and 500.From the PDF

Verification

Claims the paper makes

5 Valid · 5 Not valid · 10 Not checked · 104 Own results and interpretations

64 more claims

Create a free account to see all 124 claims and to verify the 2 references still open.

See all claims — free account
  • Probably not a substantial claim. 19
  • It may state two separate claims as one. 45

Create a free account to see these claims.

Citations

Cites

Show all 49 references

Cited by

See all 28

Metadata

Authors
Kim, K., Park, S., Hu, S. M., Song, J., Lim, W., Jeong, Y., Kim, J., Lee, S., Kwak, J. Y., Park, J., Park, J. K., Ju, B.-K., Jeong, D. S., & Kim, I.
Affiliations
  • Hanyang University (KR)
  • Korea University (KR)
  • Korea Institute of Science and Technology (KR)
Corresponding author
Kim, Inho
Venue
NPG Asia Materials
Published
2020-12
Volume
12
Issue
1
ISSN
  • 1884-4049 (ISSN-L)
  • 1884-4057
OpenAlex
W3111369697
Cited by
28
References
49
Citations by year
2026: 2 · 2025: 6 · 2024: 4 · 2023: 6 · 2022: 6 · 2021: 4
FWCI
1.37
Type
journal article
Language
en
Open access
Licence
Locations
NPG Asia Materials (publishedVersion, cc-by)
Funders
Korea Institute of Science and Technology (2E30610, 2E30761)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
  • Physical Sciences › Materials Science › Materials Chemistry › Phase-change materials and chalcogenides
Keywords
memristors, germanium implantation, artificial synapses, neuromorphic computing, conductive filaments, silver migration, nanoclusters, retention time, on/off current ratio

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Enhanced analog synaptic behavior of SiNx/a-Si bilayer memristors through Ge implantation. https://app.cochat.ai/papers/10.1038/s41427-020-00261-0
The paper
Kim, K., Park, S., Hu, S. M., Song, J., Lim, W., Jeong, Y., Kim, J., Lee, S., Kwak, J. Y., Park, J., Park, J. K., Ju, B.-K., Jeong, D. S., & Kim, I. (2020). Enhanced analog synaptic behavior of SiNx/a-Si bilayer memristors through Ge implantation. NPG Asia Materials. https://doi.org/10.1038/s41427-020-00261-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.