The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Crystalline TiO2 protective layer with graded oxygen defects for efficient and stable silicon-based photocathode
Open accessAbstract
The trade-offs between photoelectrode efficiency and stability significantly hinder the practical application of silicon-based photoelectrochemical devices. Here, we report a facile approach to decouple the trade-offs of silicon-based photocathodes by employing crystalline TiO 2 with graded oxygen defects as protection layer. The crystalline protection layer provides high-density structure and enhances stability, and at the same time oxygen defects allow the carrier transport with low resistance as required for high efficiency. The silicon-based photocathode with black TiO 2 shows a limiting current density of ~35.3 mA cm−2 and durability of over 100 h at 10 mA cm−2 in 1.0 M NaOH electrolyte, while none of photoelectrochemical behavior is observed in crystalline TiO 2 protection layer. These findings have significant suggestions for further development of silicon-based, III–V compounds and other photoelectrodes and offer the possibility for achieving highly efficient and durable photoelectrochemical devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Q., Hisatomi, T., Jia, Q., Tokudome, H., Zhong, M., Wang, C., Pan, Z., Takata, T., Nakabayashi, M., Shibata, N., et al. (2016) · Nature Materials · doi:10.1038/nmat4589 · Cited by 1,684
Photoelectrochemical water splitting in separate oxygen and hydrogen cells
Landman, A., Dotan, H., Shter, G. E., Wullenkord, M., Houaijia, A., Maljusch, A., Grader, G. S., & Rothschild, A. (2017) · Nature Materials · doi:10.1038/nmat4876 · Cited by 572
Seger, B., Laursen, A. B., Vesborg, P. C. K., Pedersen, T., Hansen, O., Dahl, S., & Chorkendorff, I. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201203585 · Cited by 306
Cited by
Defect Chemistry in Heterogeneous Catalysis: Recognition, Understanding, and Utilization
Xie, C., Yan, D., Li, H., Du, S., Chen, W., Wang, Y., Zou, Y., Chen, R., & Wang, S. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03034 · Cited by 623
Self-citationDefect Engineering for Fuel‐Cell Electrocatalysts
Li, W., Wang, D., Zhang, Y., Tao, L., Wang, T., Zou, Y., Wang, Y., Chen, R., & Wang, S. (2020) · Advanced Materials · doi:10.1002/adma.201907879 · Cited by 571
Self-citationJi, D., Fan, L., Tao, L., Sun, Y., Li, M., Yang, G., Tran, T. Q., Ramakrishna, S., & Guo, S. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201908736 · Cited by 495
Insight into the design of defect electrocatalysts: From electronic structure to adsorption energy
Xie, C., Yan, D., Chen, W., Zou, Y., Chen, R., Zang, S., Wang, Y., Yao, X., & Wang, S. (2019) · Materials Today · doi:10.1016/j.mattod.2019.05.021 · Cited by 490
Self-citationZheng, J., Lyu, Y., Qiao, M., Wang, R., Zhou, Y., Li, H., Chen, C., Li, Y., Zhou, H., Jiang, S. P., et al. (2019) · Chem · doi:10.1016/j.chempr.2018.12.003 · Cited by 318
Self-citation
Metadata
- Authors
- Zheng, J., Lyu, Y., Wang, R., Xie, C., Zhou, H., Jiang, S. P., & Wang, S.
- Venue
- Nature Communications
- Published
- 2018-09-03
- Volume
- 9
- Issue
- 1
- Pages
- 3572-3572
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2889369905
- Cited by
- 227
- References
- 3
- FWCI
- 5.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Crystalline TiO2 protective layer with graded oxygen defects for efficient and stable silicon-based photocathode. https://app.cochat.ai/papers/10.1038/s41467-018-05580-z
- The paper
- Zheng, J., Lyu, Y., Wang, R., Xie, C., Zhou, H., Jiang, S. P., & Wang, S. (2018). Crystalline TiO2 protective layer with graded oxygen defects for efficient and stable silicon-based photocathode. Nature Communications. https://doi.org/10.1038/s41467-018-05580-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.