CoChat

The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.

High-throughput identification of synthetic riboswitches by barcode-free amplicon-sequencing in human cells

Open access

Abstract

Synthetic riboswitches mediating ligand-dependent RNA cleavage or splicing-modulation represent elegant tools to control gene expression in various applications, including next-generation gene therapy. However, due to the limited understanding of context-dependent structure–function relationships, the identification of functional riboswitches requires large-scale-screening of aptamer-effector-domain designs, which is hampered by the lack of suitable cellular high-throughput methods. Here we describe a fast and broadly applicable method to functionally screen complex riboswitch libraries (~1.8 × 10 4 constructs) by cDNA-amplicon-sequencing in transiently transfected and stimulated human cells. The self-barcoding nature of each construct enables quantification of differential mRNA levels without additional pre-selection or cDNA-manipulation steps. We apply this method to engineer tetracycline- and guanine-responsive ON- and OFF-switches based on hammerhead, hepatitis-delta-virus and Twister ribozymes as well as U1-snRNP polyadenylation-dependent RNA devices. In summary, our method enables fast and efficient high-throughput riboswitch identification, thereby overcoming a major hurdle in the development cascade for therapeutically applicable gene switches.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-14491-x

Cites

35 of 35 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Principle and schematic workflow for the sequencing-based identification of functional riboswitches in human cells. a HEK-293 cells are transfected with a plasmid library harboring PCR-binding site (red arrowheads)-flanked aptazyme variants with a randomized motif (here: tetracycline (Tet)-hammerhead design). b Functional ON-switches are characterized by aptazyme auto-cleavage and mRNA-degradation in the absence of Tet, whereas upon Tet addition, cleavage is inhibited, resulting in stable mRNA. c Following cell lysis, RNA purification and reverse transcription into cDNA, riboswitch sequences are PCR-amplified and applied to amplicon-seq analysis. Functional sequences are identified from differential expression analyses (stimulated vs. unstimulated). ITR, inverted terminal repeat; CMV, cytomegalovirus; GFP, green fluorescent protein; pA, polyadenylation signal.
Fig. 1 Principle and schematic workflow for the sequencing-based identification of functional riboswitches in human cells. a HEK-293 cells are transfected with a plasmid library harboring PCR-binding site (red arrowheads)-flanked aptazyme variants with a randomized motif (here: tetracycline (Tet)-hammerhead design). b Functional ON-switches are characterized by aptazyme auto-cleavage and mRNA-degradation in the absence of Tet, whereas upon Tet addition, cleavage is inhibited, resulting in stable mRNA. c Following cell lysis, RNA purification and reverse transcription into cDNA, riboswitch sequences are PCR-amplified and applied to amplicon-seq analysis. Functional sequences are identified from differential expression analyses (stimulated vs. unstimulated). ITR, inverted terminal repeat; CMV, cytomegalovirus; GFP, green fluorescent protein; pA, polyadenylation signal.CC BY · PubMed Central
Fig. 2 Identification of Tet-responsive hammerhead ribozymes by amplicon-seq. a Secondary structure of the Tet-hammerhead ribozyme library design. Blue nucleotides indicate the randomized motif. The arrowhead indicates the cleavage site. A/G mutation at the indicated position renders the ribozyme inactive. b Tet riboswitch construct frequency analysis of the original library and c conservation of complexity following transfection in HEK-293 cells. CV, coefficient of variation. d Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). e Correlation of expression induction upon Tet for constructs and associated fold changes reported by Beilstein et al.4 (X-axis) with fold changes measured in our screen (Y-axis). f Selected hits from the Tet riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 25 and 50 µM Tet, respectively. The bar plots show the raw counts under untreated, 25 µM and 50 µM Tet-stimulated conditions (three groups from left to right, n = 8 replicates each). g Functional hit validation in HEK-293 cells (n = 3 experiments, mean ± s.d.); Hh-act/inact: constitutively active/inactive ribozyme control. h Maximal fold changes and p-values measured upon stimulation vs. 0 µM Tet for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.
Fig. 2 Identification of Tet-responsive hammerhead ribozymes by amplicon-seq. a Secondary structure of the Tet-hammerhead ribozyme library design. Blue nucleotides indicate the randomized motif. The arrowhead indicates the cleavage site. A/G mutation at the indicated position renders the ribozyme inactive. b Tet riboswitch construct frequency analysis of the original library and c conservation of complexity following transfection in HEK-293 cells. CV, coefficient of variation. d Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). e Correlation of expression induction upon Tet for constructs and associated fold changes reported by Beilstein et al.4 (X-axis) with fold changes measured in our screen (Y-axis). f Selected hits from the Tet riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 25 and 50 µM Tet, respectively. The bar plots show the raw counts under untreated, 25 µM and 50 µM Tet-stimulated conditions (three groups from left to right, n = 8 replicates each). g Functional hit validation in HEK-293 cells (n = 3 experiments, mean ± s.d.); Hh-act/inact: constitutively active/inactive ribozyme control. h Maximal fold changes and p-values measured upon stimulation vs. 0 µM Tet for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.CC BY · PubMed Central
Fig. 3 Identification of Gua-responsive HDV ribozymes by amplicon-seq. a Secondary structure of the Gua-HDV ribozyme library design. Blue nucleotides indicate the randomized motif. The arrowhead indicates the cleavage site. C/U mutation at the indicated position renders the ribozyme inactive. b Guanine riboswitch construct frequency analysis of the original library. c Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). d Selected hits from the Gua-HDV riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 30, 100, and 300 µM guanine, respectively. The bar plots show the raw counts under untreated, 30, 100, and 300 µM µM Gua-stimulated conditions (four groups from left to right, n = 8 replicates each). e Functional hit validation in HEK-293 cells at increasing guanine doses [µM] (n = 3 replicates, mean ± s.d.); HDV-act/inact: constitutively active/inactive ribozyme control. f Maximal fold changes and p-values measured upon stimulation vs. 0 µM guanine for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.
Fig. 3 Identification of Gua-responsive HDV ribozymes by amplicon-seq. a Secondary structure of the Gua-HDV ribozyme library design. Blue nucleotides indicate the randomized motif. The arrowhead indicates the cleavage site. C/U mutation at the indicated position renders the ribozyme inactive. b Guanine riboswitch construct frequency analysis of the original library. c Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). d Selected hits from the Gua-HDV riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 30, 100, and 300 µM guanine, respectively. The bar plots show the raw counts under untreated, 30, 100, and 300 µM µM Gua-stimulated conditions (four groups from left to right, n = 8 replicates each). e Functional hit validation in HEK-293 cells at increasing guanine doses [µM] (n = 3 replicates, mean ± s.d.); HDV-act/inact: constitutively active/inactive ribozyme control. f Maximal fold changes and p-values measured upon stimulation vs. 0 µM guanine for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.CC BY · PubMed Central
Fig. 4 Identification of Gua-responsive hammerhead ribozymes by amplicon-seq. a Secondary structure of the guanine hammerhead ribozyme library design. Blue nucleotides indicate the randomized motif. The arrowhead indicates the cleavage site. A/G mutation at the indicated position renders the ribozyme inactive. b Guanine riboswitch construct frequency analysis of the original library. c Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). d Selected hits from the Gua-HHR riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 30, 100, and 300 µM guanine, respectively. The bar plots show the raw counts under untreated, 30, 100, and 300 µM µM Gua-stimulated conditions (four groups from left to right, n = 8 replicates each). e Functional hit validation in HEK-293 cells at increasing guanine doses [µM] (n = 3 replicates, mean ± s.d.); Hh-act/inact: constitutively active/inactive ribozyme control. f Maximal fold changes and p-values measured upon stimulation vs. 0 µM guanine for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.
Fig. 4 Identification of Gua-responsive hammerhead ribozymes by amplicon-seq. a Secondary structure of the guanine hammerhead ribozyme library design. Blue nucleotides indicate the randomized motif. The arrowhead indicates the cleavage site. A/G mutation at the indicated position renders the ribozyme inactive. b Guanine riboswitch construct frequency analysis of the original library. c Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). d Selected hits from the Gua-HHR riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 30, 100, and 300 µM guanine, respectively. The bar plots show the raw counts under untreated, 30, 100, and 300 µM µM Gua-stimulated conditions (four groups from left to right, n = 8 replicates each). e Functional hit validation in HEK-293 cells at increasing guanine doses [µM] (n = 3 replicates, mean ± s.d.); Hh-act/inact: constitutively active/inactive ribozyme control. f Maximal fold changes and p-values measured upon stimulation vs. 0 µM guanine for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.CC BY · PubMed Central
Fig. 5 Identification of Tet-responsive Twister ribozymes by amplicon-seq. a Secondary structure of the Tet-Twister library design. Blue boxes indicate the randomized motifs of the nine sub-libraries, connecting the Twister ribozyme and the Tet aptamer. The arrowhead indicates the cleavage site. GU/UG mutation at the indicated position renders the ribozyme inactive. Inset: Library construct frequency analysis by DNA sequencing. b Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change) for the nine Tet-Twister sub-libraries. Selected hits are labeled with their sequence motif. c Selected hits from the Tet-Twister library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 12.5, 25, and 50 µM Tet, respectively. The bar plots show the raw counts under untreated, 12.5, 25, and 50 µM Tet-stimulated conditions (four groups from left to right, n = 8 replicates each). d Functional hit validation in HeLa cells at increasing tetracycline doses [µM] (n = 3 replicates, mean ± s.d.); psi-Check: ribozyme-free control construct; Tw-act/inact: constitutively active/inactive ribozyme control. e Maximal fold changes and p-values measured upon stimulation vs. 0 µM Tet for all tested constructs. f Network analysis of motif similarity for the CG_3N3N library at 25 µM Tet vs. untreated and an FDR < 1%. Each line segment represents a single nucleotide change. The “T9” construct is circled in red. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.
Fig. 5 Identification of Tet-responsive Twister ribozymes by amplicon-seq. a Secondary structure of the Tet-Twister library design. Blue boxes indicate the randomized motifs of the nine sub-libraries, connecting the Twister ribozyme and the Tet aptamer. The arrowhead indicates the cleavage site. GU/UG mutation at the indicated position renders the ribozyme inactive. Inset: Library construct frequency analysis by DNA sequencing. b Volcano plots displaying the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change) for the nine Tet-Twister sub-libraries. Selected hits are labeled with their sequence motif. c Selected hits from the Tet-Twister library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 12.5, 25, and 50 µM Tet, respectively. The bar plots show the raw counts under untreated, 12.5, 25, and 50 µM Tet-stimulated conditions (four groups from left to right, n = 8 replicates each). d Functional hit validation in HeLa cells at increasing tetracycline doses [µM] (n = 3 replicates, mean ± s.d.); psi-Check: ribozyme-free control construct; Tw-act/inact: constitutively active/inactive ribozyme control. e Maximal fold changes and p-values measured upon stimulation vs. 0 µM Tet for all tested constructs. f Network analysis of motif similarity for the CG_3N3N library at 25 µM Tet vs. untreated and an FDR < 1%. Each line segment represents a single nucleotide change. The “T9” construct is circled in red. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.CC BY · PubMed Central
Fig. 6 Identification of Gua-responsive riboswitches based on a U1-snRNP-dependent mode of action. a Secondary structure of the Gua-U1-snRNP riboswitch library design. The U1-snRNP binding site (CAGGUAAGU) is included into a prolonged stem P1 of the guanine aptamer. Blue nucleotides indicate the randomized motif. b Mode of action of U1-snRNP-dependent riboswitches. In the ligand-unbound conformation, the U1-snRNP binding site is available, allowing for U1-snRNP binding and interference with the polyadenylation process. Upon ligand binding, the aptamer stem is stabilized and the U1-snRNP binding site is masked, enabling polyadenylation and subsequent gene expression. c Guanine riboswitch construct frequency analysis of the original library. d Volcano plots showing the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). e Selected hits from the Gua-U1-snRNP riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 30, 100, and 300 µM guanine, respectively. The bar plots show the raw counts under untreated, 30, 100, and 300 µM µM Gua-stimulated conditions (four groups from left to right, n = 8 replicates each). f Functional hit validation in HEK-293 cells at increasing guanine doses [µM] (n = 3 replicates, mean ± s.d.); U1-bs: construct harboring the freely accessible U1-snRNP binding site. g Maximal fold changes and p-values measured upon stimulation vs. 0 µM guanine for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.
Fig. 6 Identification of Gua-responsive riboswitches based on a U1-snRNP-dependent mode of action. a Secondary structure of the Gua-U1-snRNP riboswitch library design. The U1-snRNP binding site (CAGGUAAGU) is included into a prolonged stem P1 of the guanine aptamer. Blue nucleotides indicate the randomized motif. b Mode of action of U1-snRNP-dependent riboswitches. In the ligand-unbound conformation, the U1-snRNP binding site is available, allowing for U1-snRNP binding and interference with the polyadenylation process. Upon ligand binding, the aptamer stem is stabilized and the U1-snRNP binding site is masked, enabling polyadenylation and subsequent gene expression. c Guanine riboswitch construct frequency analysis of the original library. d Volcano plots showing the significance (FDR) of changes in riboswitch abundance as a function of the change in expression (log2 fold change). e Selected hits from the Gua-U1-snRNP riboswitch library screen, randomized sequence, mean counts per million (CPM), fold change (FC) and false-discovery rate (FDR) at 30, 100, and 300 µM guanine, respectively. The bar plots show the raw counts under untreated, 30, 100, and 300 µM µM Gua-stimulated conditions (four groups from left to right, n = 8 replicates each). f Functional hit validation in HEK-293 cells at increasing guanine doses [µM] (n = 3 replicates, mean ± s.d.); U1-bs: construct harboring the freely accessible U1-snRNP binding site. g Maximal fold changes and p-values measured upon stimulation vs. 0 µM guanine for all tested constructs. *p < 0.05, **p < 0.01, ***p < 0.001 (unpaired T-Test, two-tailed). Source data are provided as a Source Data file.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 35 references

Cited by

See all 57

Metadata

Authors
Strobel, B., Spöring, M., Klein, H., Blazevic, D., Rust, W., Sayols, S., Hartig, J. S., & Kreuz, S.
Affiliations
  • Boehringer Ingelheim (Germany) (DE)
  • University of Konstanz (DE)
Corresponding author
Kreuz, Sebastian
Venue
Nature Communications
Published
2020-02-05
Volume
11
Issue
1
Pages
714-714
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3004771459
Cited by
57
References
35
Citations by year
2026: 7 · 2025: 7 · 2024: 4 · 2023: 8 · 2022: 7 · 2021: 14 · 2020: 9
FWCI
3.08
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • Zurich Open Repository and Archive (University of Zurich) (acceptedVersion, cc-by)
  • KOPS (University of Konstanz) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • Zurich Open Repository and Archive (University of Zurich) (submittedVersion, cc-by)
  • Zurich Open Repository and Archive (University of Zurich)
Funders
Universität Konstanz
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › RNA and protein synthesis mechanisms
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › RNA Research and Splicing
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › RNA Interference and Gene Delivery
Keywords
synthetic riboswitches, high-throughput screening, hammerhead ribozyme, hepatitis delta virus ribozyme, twister ribozyme, gene expression regulation, gene therapy, human cells
MeSH terms
Hepatitis Delta Virus, Gene Expression Regulation, Guanine, Humans, Tetracycline, RNA, Catalytic, Ribonucleoprotein, U1 Small Nuclear, DNA, Complementary, Computational Biology, HEK293 Cells, Synthetic Biology, DNA Barcoding, Taxonomic, Riboswitch, High-Throughput Nucleotide Sequencing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: High-throughput identification of synthetic riboswitches by barcode-free amplicon-sequencing in human cells. https://app.cochat.ai/papers/10.1038/s41467-020-14491-x
The paper
Strobel, B., Spöring, M., Klein, H., Blazevic, D., Rust, W., Sayols, S., Hartig, J. S., & Kreuz, S. (2020). High-throughput identification of synthetic riboswitches by barcode-free amplicon-sequencing in human cells. Nature Communications. https://doi.org/10.1038/s41467-020-14491-x

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.