CoChat

Room-temperature photonic logical qubits via second-order nonlinearities

Open access

The DOI matches its Crossref record; 117 of the 117 references it cites were found in a registry or an index.

Abstract

Recent progress in nonlinear optical materials and microresonators has brought quantum computing with bulk optical nonlinearities into the realm of possibility. This platform is of great interest, not only because photonics is an obvious choice for quantum networks, but also as a promising route to quantum information processing at room temperature. We propose an approach for reprogrammable room-temperature photonic quantum logic that significantly simplifies the realization of various quantum circuits, and in particular, of error correction. The key element is the programmable photonic multi-mode resonator that implements reprogrammable bosonic quantum logic gates, while using only the bulk χ(2) nonlinear susceptibility. We theoretically demonstrate that just two of these elements suffice for a complete, compact error-correction circuit on a bosonic code, without the need for measurement or feed-forward control. Encoding and logical operations on the code are also easily achieved with these reprogrammable quantum photonic processors. An extrapolation of current progress in nonlinear optical materials and photonic circuits indicates that such circuitry should be achievable within the next decade.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-20417-4

Cites

117 of 117 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 The triply-resonant nonlinear cavity. The χ(2) medium enables the joint control of three modes. We denote the mode operators respectively by a^, b^, and c^. The χ(2) medium enables frequency doubling from b^ to a^, and a three-way interaction between modes b^, c^, and the control field. The control field is either a a classical microwave drive, Ep(t), or b a classical optical drive of envelope p(t). This three-way interaction is effectively a linear interaction between modes b^ and c^ that is controlled by the classical drive. The combination of the fixed frequency-doubling interaction and the controlled linear interaction allows extensive control of the joint nonlinear evolution. This evolution conserves the quantity 2na + nb + nc, in which na, nb, and nc are the occupation numbers of the respective modes. We also depict the relative values of the frequencies of the three modes; in a, the frequencies of modes b^ and c^ are separated by the much smaller frequency of the microwave drive.
Fig. 1 The triply-resonant nonlinear cavity. The χ(2) medium enables the joint control of three modes. We denote the mode operators respectively by a^, b^, and c^. The χ(2) medium enables frequency doubling from b^ to a^, and a three-way interaction between modes b^, c^, and the control field. The control field is either a a classical microwave drive, Ep(t), or b a classical optical drive of envelope p(t). This three-way interaction is effectively a linear interaction between modes b^ and c^ that is controlled by the classical drive. The combination of the fixed frequency-doubling interaction and the controlled linear interaction allows extensive control of the joint nonlinear evolution. This evolution conserves the quantity 2na + nb + nc, in which na, nb, and nc are the occupation numbers of the respective modes. We also depict the relative values of the frequencies of the three modes; in a, the frequencies of modes b^ and c^ are separated by the much smaller frequency of the microwave drive.CC BY · PubMed Central
Fig. 2 The control pulses implementing the three gates that are used to build our error correction circuit. The top row shows the real and imaginary parts of the control pulses for each gate. The following rows show how the populations of the modes evolve under each gate for a given initial state. The optimizer produces pulses p(t) such that each of the desired transformations leads to constructive interference at the exact same time. Shorter pulses are possible, at the expense of higher power and bandwidth requirements39, up to a point at which the pulse is too short to perform even a single complete oscillation in a subspace defined by an integer value of 2na + nb + nc.
Fig. 2 The control pulses implementing the three gates that are used to build our error correction circuit. The top row shows the real and imaginary parts of the control pulses for each gate. The following rows show how the populations of the modes evolve under each gate for a given initial state. The optimizer produces pulses p(t) such that each of the desired transformations leads to constructive interference at the exact same time. Shorter pulses are possible, at the expense of higher power and bandwidth requirements39, up to a point at which the pulse is too short to perform even a single complete oscillation in a subspace defined by an integer value of 2na + nb + nc.CC BY · PubMed Central
Fig. 3 Our minimal architecture for error correction of bosonic codes, readily expandable to larger tasks. The circuit depicted can be used to correct a single-photon loss using a two-mode bosonic code. The circuit consists of two cavity processors, which for the most part process each mode of the code separately, and a small network of reprogrammable beam splitters and delay lines. These are used to reroute states between the modes of processors as necessary. Each cavity processor is also capable of performing many multi-qubit gates for single- and dual-rail encoded qubits, as well as preparing and manipulating higher-number Fock states. The network of programmable beam splitters between the processors and the delay lines can also be expanded to a fully connected network, enabling universal rerouting between the three modes of each processor for general-purpose quantum computation. The programmable beam splitters can be implemented as Mach–Zehnder interferometers (as shown in the inset) with two 50/50 beam splitters and a programmable delay (the orange medium in the diagram). Classical electronics will be necessary to ensure the pacing of various operations in this device, but no feedback or decision circuitry is necessary, as the approach is measurement free.
Fig. 3 Our minimal architecture for error correction of bosonic codes, readily expandable to larger tasks. The circuit depicted can be used to correct a single-photon loss using a two-mode bosonic code. The circuit consists of two cavity processors, which for the most part process each mode of the code separately, and a small network of reprogrammable beam splitters and delay lines. These are used to reroute states between the modes of processors as necessary. Each cavity processor is also capable of performing many multi-qubit gates for single- and dual-rail encoded qubits, as well as preparing and manipulating higher-number Fock states. The network of programmable beam splitters between the processors and the delay lines can also be expanded to a fully connected network, enabling universal rerouting between the three modes of each processor for general-purpose quantum computation. The programmable beam splitters can be implemented as Mach–Zehnder interferometers (as shown in the inset) with two 50/50 beam splitters and a programmable delay (the orange medium in the diagram). Classical electronics will be necessary to ensure the pacing of various operations in this device, but no feedback or decision circuitry is necessary, as the approach is measurement free.CC BY · PubMed Central
Fig. 4 The error-correcting circuit, unrolled in time. The horizontal axis represents the flow of time, depicting how a pair of triply-resonant cavities is being used. This circuit would be executed on the hardware depicted in Fig. 3. The main drawing is the sequence of operations that we need to perform in parallel in the two triply-resonant cavities, in order to perform the error correction. After placing the code and ancilla modes in the appropriate cavity modes, we accomplish the initial pumping and routing gates. After that, we need to shuffle the ancillary modes by releasing them in the appropriate waveguides. The spatial modes into which the code states are moved depend on the state of the ancillas, thanks to the conditional routing gates. As the ancillas contain information about the presence of photon-loss errors, this lets us perform operations conditioned on the loss of a photon, by performing the two conditional branches in parallel in different physical locations of the circuit. The conditional routing gates then act in reverse, ensuring that all spatial modes end in the same location, without breaking the bijectivity required for any quantum circuit. The various spatial modes employed can be seen in the bottom insets of the figure. Supplementary Figure 1 provides a more detailed rendition. Importantly, as seen in Fig. 3, we do not need 12 triply-resonant cavities as depicted above, rather only 2 cavities with a network of waveguides and programmable beam splitters72 that can route the spatial modes as necessary, so that each cavity can be used repeatedly. The gate pictographs are taken from the Font Awesome icon set.
Fig. 4 The error-correcting circuit, unrolled in time. The horizontal axis represents the flow of time, depicting how a pair of triply-resonant cavities is being used. This circuit would be executed on the hardware depicted in Fig. 3. The main drawing is the sequence of operations that we need to perform in parallel in the two triply-resonant cavities, in order to perform the error correction. After placing the code and ancilla modes in the appropriate cavity modes, we accomplish the initial pumping and routing gates. After that, we need to shuffle the ancillary modes by releasing them in the appropriate waveguides. The spatial modes into which the code states are moved depend on the state of the ancillas, thanks to the conditional routing gates. As the ancillas contain information about the presence of photon-loss errors, this lets us perform operations conditioned on the loss of a photon, by performing the two conditional branches in parallel in different physical locations of the circuit. The conditional routing gates then act in reverse, ensuring that all spatial modes end in the same location, without breaking the bijectivity required for any quantum circuit. The various spatial modes employed can be seen in the bottom insets of the figure. Supplementary Figure 1 provides a more detailed rendition. Importantly, as seen in Fig. 3, we do not need 12 triply-resonant cavities as depicted above, rather only 2 cavities with a network of waveguides and programmable beam splitters72 that can route the spatial modes as necessary, so that each cavity can be used repeatedly. The gate pictographs are taken from the Font Awesome icon set.CC BY · PubMed Central
Fig. 5 Logical qubit lifetime at the “break even” regime where it begins to outperform unprotected qubits. In blue, we see the decay of a single photon, i.e., an unprotected single-rail qubit. In orange, we see the decay of our two-mode code if we do not perform any correction operations—it decays faster as it contains a higher number of photons. The green line represents the decay of the encoded qubit in the presence of periodic correction operations. The infidelity of the correction operations due to photon loss that can happen during the operation is taken into account. The figure represents a lower bound for the performance of our protocol, with beneficial higher order effects being neglected in order to simplify the simulation. The “break even” point is achieved at Vshg~10⁻³λ³/n³, Q ~ 2 × 108, and χ⁽²⁾~100pm/V for λa ~ 750 nm. Waveguide losses are neglected, as they would be insignificant compared to the rest of the operations.
Fig. 5 Logical qubit lifetime at the “break even” regime where it begins to outperform unprotected qubits. In blue, we see the decay of a single photon, i.e., an unprotected single-rail qubit. In orange, we see the decay of our two-mode code if we do not perform any correction operations—it decays faster as it contains a higher number of photons. The green line represents the decay of the encoded qubit in the presence of periodic correction operations. The infidelity of the correction operations due to photon loss that can happen during the operation is taken into account. The figure represents a lower bound for the performance of our protocol, with beneficial higher order effects being neglected in order to simplify the simulation. The “break even” point is achieved at Vshg~10⁻³λ³/n³, Q ~ 2 × 108, and χ⁽²⁾~100pm/V for λa ~ 750 nm. Waveguide losses are neglected, as they would be insignificant compared to the rest of the operations.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 117 references

Cited by

See all 44

Metadata

Authors
Krastanov, S., Heuck, M., Shapiro, J. H., Narang, P., Englund, D. R., & Jacobs, K.
Affiliations
  • Harvard University (US)
  • Massachusetts Institute of Technology (US)
  • Louisiana State University (US)
Corresponding author
Krastanov, Stefan
Venue
Nature Communications
Published
2021-01-08
Volume
12
Issue
1
Pages
191-191
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3005685782
Cited by
44
References
116
Citations by year
2026: 3 · 2025: 5 · 2024: 11 · 2023: 8 · 2022: 9 · 2021: 7
FWCI
3.09
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, other-oa)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • DSpace@MIT (Massachusetts Institute of Technology) (submittedVersion, cc-by-nc)
  • arXiv (Cornell University)
Funders
Mitre Quantum Moonshot Programme, CCDC Army Research Laboratory ECI grant
Topics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum Information and Cryptography
  • Physical Sciences › Computer Science › Artificial Intelligence › Quantum Computing Algorithms and Architecture
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum optics and atomic interactions
Keywords
second-order nonlinear optics, room-temperature quantum computing, bosonic codes, quantum error correction, multimode resonator, nonlinear optical materials, photonic quantum processors, logical qubits

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Room-temperature photonic logical qubits via second-order nonlinearities. https://app.cochat.ai/papers/10.1038/s41467-020-20417-4
The paper
Krastanov, S., Heuck, M., Shapiro, J. H., Narang, P., Englund, D. R., & Jacobs, K. (2021). Room-temperature photonic logical qubits via second-order nonlinearities. Nature Communications. https://doi.org/10.1038/s41467-020-20417-4

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.