CoChat

422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth

Open access

Published version of a preprint

The DOI matches its Crossref record, with a small difference in title or year; 86 of the 86 references it cites were found in a registry or an index.

Abstract

High quality-factor (Q) optical resonators are a key component for ultra-narrow linewidth lasers, frequency stabilization, precision spectroscopy and quantum applications. Integration in a photonic waveguide platform is key to reducing cost, size, power and sensitivity to environmental disturbances. However, to date, the Q of all-waveguide resonators has been relegated to below 260 Million. Here, we report a Si 3 N 4 resonator with 422 Million intrinsic and 3.4 Billion absorption-limited Qs. The resonator has 453 kHz intrinsic, 906 kHz loaded, and 57 kHz absorption-limited linewidths and the corresponding 0.060 dB m −1 loss is the lowest reported to date for waveguides with deposited oxide upper cladding. These results are achieved through a careful reduction of scattering and absorption losses that we simulate, quantify and correlate to measurements. This advancement in waveguide resonator technology paves the way to all-waveguide Billion Q cavities for applications including nonlinear optics, atomic clocks, quantum photonics and high-capacity fiber communications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-021-21205-4

Cites

86 of 86 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Bus-coupled ring resonator and loss mechanisms. a Illustration of the resonator design. b Waveguide design. Inset scanning electron micrograph (SEM) image of the waveguide cross section with the thermal oxide bottom cladding, an etched low-pressure chemical vapor deposition (LPCVD) grown silicon nitride waveguide core, an additional thin (~5 nm) blanket layer of silicon nitride (covering the core top and sidewalls), and a tetraethoxysilane pre-cursor plasma-enhanced chemical vapor deposition (TEOS-PECVD) oxide top cladding. SEM length scale bar is 100 nm. c Waveguide surface roughness scatters the guide mode energy into radiation mode and bulk absorption generates heat. d Point defects split resonances. e Defect bonds such as Si–O–H, Si–H, N–H, and dangling bonds lead to surface absorption. f The bus-ring coupler scatters energy into radiation modes and adds excess loss.
Fig. 1 Bus-coupled ring resonator and loss mechanisms. a Illustration of the resonator design. b Waveguide design. Inset scanning electron micrograph (SEM) image of the waveguide cross section with the thermal oxide bottom cladding, an etched low-pressure chemical vapor deposition (LPCVD) grown silicon nitride waveguide core, an additional thin (~5 nm) blanket layer of silicon nitride (covering the core top and sidewalls), and a tetraethoxysilane pre-cursor plasma-enhanced chemical vapor deposition (TEOS-PECVD) oxide top cladding. SEM length scale bar is 100 nm. c Waveguide surface roughness scatters the guide mode energy into radiation mode and bulk absorption generates heat. d Point defects split resonances. e Defect bonds such as Si–O–H, Si–H, N–H, and dangling bonds lead to surface absorption. f The bus-ring coupler scatters energy into radiation modes and adds excess loss.CC BY · PubMed Central
Fig. 2 Linewidth, ring-down, and photo-thermal absorption loss measurements of the UHQR and control devices. a Spectral scan of the fundamental 1570 nm transverse electric field (TE) mode for the control (blue curve) and ultra-high quality factor (Q) resonator (UHQR) (orange curve) devices. The total and intrinsic linewidths are extracted from a Lorentzian fit. The yellow sinusoidal signal is a radio frequency (RF) calibrated fiber Mach-Zehnder interferometer (free spectral range (FSR) = 5.871 ± 0.004 MHz, see the Supplementary Information). M, Million. b UHQR ring-down time (τ) measurement at 1570 nm with calculated loaded and intrinsic Q factors (QL and Qin). The experimental data (blue curve) is fitted with an exponential curve (orange curve). c Summary of the total (blue circle) and intrinsic (blue dot) linewidths for the control and total (orange circle) and intrinsic (orange dot) linewidths for the UHQR devices from 1550 nm to 1600 nm. d Measured intrinsic Q from 1550 nm to 1600 nm for the control (blue dot) and UHQR (orange dot) resonators. e Photo-thermal absorption loss measurement from 1550 nm to 1600 nm for UHQR and control. The highest UHQR 422 Million intrinsic Q at 1570 nm and the absorption-limited Q (Qabs) of 3.4 Billion at 1600 nm are indicated. The non-absorption loss is fit to the surface scattering loss model (dash lines). The blue dot, cross, and diamond data represent the intrinsic, absorption, and non-absorption losses for the control resonators. The orange dot, cross, and diamond data represent the intrinsic, absorption, and non-absorption losses for the UHQR resonators.
Fig. 2 Linewidth, ring-down, and photo-thermal absorption loss measurements of the UHQR and control devices. a Spectral scan of the fundamental 1570 nm transverse electric field (TE) mode for the control (blue curve) and ultra-high quality factor (Q) resonator (UHQR) (orange curve) devices. The total and intrinsic linewidths are extracted from a Lorentzian fit. The yellow sinusoidal signal is a radio frequency (RF) calibrated fiber Mach-Zehnder interferometer (free spectral range (FSR) = 5.871 ± 0.004 MHz, see the Supplementary Information). M, Million. b UHQR ring-down time (τ) measurement at 1570 nm with calculated loaded and intrinsic Q factors (QL and Qin). The experimental data (blue curve) is fitted with an exponential curve (orange curve). c Summary of the total (blue circle) and intrinsic (blue dot) linewidths for the control and total (orange circle) and intrinsic (orange dot) linewidths for the UHQR devices from 1550 nm to 1600 nm. d Measured intrinsic Q from 1550 nm to 1600 nm for the control (blue dot) and UHQR (orange dot) resonators. e Photo-thermal absorption loss measurement from 1550 nm to 1600 nm for UHQR and control. The highest UHQR 422 Million intrinsic Q at 1570 nm and the absorption-limited Q (Qabs) of 3.4 Billion at 1600 nm are indicated. The non-absorption loss is fit to the surface scattering loss model (dash lines). The blue dot, cross, and diamond data represent the intrinsic, absorption, and non-absorption losses for the control resonators. The orange dot, cross, and diamond data represent the intrinsic, absorption, and non-absorption losses for the UHQR resonators.CC BY · PubMed Central
Fig. 3 Resonance splitting. a Spectral scan across five free spectral ranges (FSRs) around 1550 nm confirms single transverse electrical field (TE) mode operation, blue curve. Details of individual resonances reveal random splitting. b Resonance splitting via coupling between forward and backward propagating waves. c Scatter plot of the measured intrinsic linewidth versus the splitting rate near 1550 nm for three ultra-high Q resonator (UHQR) devices fabricated on the same wafer. Blue dot, yellow dot, and purple dot represent UHQR1, UHQR2, and UHQR3 devices, respectively.
Fig. 3 Resonance splitting. a Spectral scan across five free spectral ranges (FSRs) around 1550 nm confirms single transverse electrical field (TE) mode operation, blue curve. Details of individual resonances reveal random splitting. b Resonance splitting via coupling between forward and backward propagating waves. c Scatter plot of the measured intrinsic linewidth versus the splitting rate near 1550 nm for three ultra-high Q resonator (UHQR) devices fabricated on the same wafer. Blue dot, yellow dot, and purple dot represent UHQR1, UHQR2, and UHQR3 devices, respectively.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 86 references

Research works printed but not linked: 1

  1. Puckett, M., Bose, D., Nelson, K. & Blumenthal, D. J. In CLEO: Science and Innovations SM4O–1 (Optical Society of America, 2019). http://proxy.osapublishing.org/conference.cfm?meetingid=124&yr=2019.

Cited by

See all 287

Metadata

Authors
Puckett, M. W., Liu, K., Chauhan, N., Zhao, Q., Jin, N., Cheng, H., Wu, J., Behunin, R. O., Rakich, P. T., Nelson, K. D., & Blumenthal, D. J.
Affiliations
  • Honeywell (United States) (US)
  • University of California, Santa Barbara (US)
  • Yale University (US)
  • Northern Arizona University (US)
Corresponding author
Blumenthal, Daniel J.
Venue
Nature Communications
Published
2021-02-10
Volume
12
Issue
1
Pages
934-934
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3085120031
Cited by
271
References
86
Citations by year
2026: 33 · 2025: 60 · 2024: 49 · 2023: 47 · 2022: 57 · 2021: 24
FWCI
13.01
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Research Square (acceptedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • eScholarship (California Digital Library) (submittedVersion)
  • eScholarship (California Digital Library) (submittedVersion, cc-by)
  • Figshare (submittedVersion, public-domain)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
  • arXiv (Cornell University) (cc-by)
Funders
  • U.S. Department of Energy (DEAR0001042)
  • Defense Advanced Research Projects Agency (N66001, DE-AR0001042, N66001-16-C-4017)
  • Advanced Research Projects Agency - Energy (DE‐AR0001042)
  • Advanced Research Projects Agency (DE-AR0001042)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced Fiber Laser Technologies
Keywords
silicon nitride waveguides, intrinsic linewidth, scattering loss, waveguide loss, integrated photonics, frequency stabilization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: 422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth. https://app.cochat.ai/papers/10.1038/s41467-021-21205-4
The paper
Puckett, M. W., Liu, K., Chauhan, N., Zhao, Q., Jin, N., Cheng, H., Wu, J., Behunin, R. O., Rakich, P. T., Nelson, K. D., & Blumenthal, D. J. (2021). 422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth. Nature Communications. https://doi.org/10.1038/s41467-021-21205-4

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.