Mapping internal temperatures during high-rate battery applications
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Electric vehicles (EV) demand high charge/discharge rates creating potentially dangerous temperature rises. Lithium-ion cells are sealed during their manufacture, making internal temperatures challenging to probe1. Tracking current collector expansion using X-ray diffraction (XRD) permits non-destructive internal temperature measurements2; however, cylindrical cells are known to experience complex internal strain3,4. Here, we characterise the state-of-charge (SoC), mechanical strain, and temperature within Lithium-ion 18650 cells operated at high rates (>3C) via two advanced synchrotron XRD methods: firstly, as entire cross-sectional temperature maps during open-circuit cooling and secondly, single-point temperatures during charge/discharge cycling. We observed that a 20-minute discharge on an energy-optimised cell (3.5 Ah) resulted in internal temperatures >70 °C, whereas, a faster 12-minute discharge on a power-optimised cell (1.5 Ah) resulted in substantially lower temperatures (< 50 °C). However, when comparing the two cells under the same electrical current, the peak temperatures were similar, e.g., a 6A discharge resulted in 40°C peak temperatures for both cell types. We observe that the operando temperature rise is due to heat accumulation, strongly influenced by the charging protocol e.g., constant-current (CC) and/or constant-voltage (CV). Design mitigations for temperature-related battery issues should now be explored using this novel methodology to provide opportunities for improved thermal management during high-rate EV applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674 · cited 1×
“To meet these demands many high-rate solutions are emerging 7-9 , however, thermally induced degradation remains problematic 10,11 .”
BackgroundLithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Future material demand for automotive lithium-based batteries
Xu, C., Dai, Q., Gaines, L., Hu, M., Tukker, A., & Steubing, B. (2020) · Communications Materials · doi:10.1038/s43246-020-00095-x · Cited by 898
Cited by
Origin of fast charging in hard carbon anodes
Li, Y., Vasileiadis, A., Zhou, Q., Lu, Y., Meng, Q., Li, Y., Ombrini, P., Zhao, J., Chen, Z., Niu, Y., et al. (2024) · Nature Energy · doi:10.1038/s41560-023-01414-5 · Cited by 490
Thermal state monitoring of lithium-ion batteries: Progress, challenges, and opportunities
Zheng, Y., Che, Y., Hu, X., Sui, X., Stroe, D.-I., & Teodorescu, R. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101120 · Cited by 273
Xie, L., Wang, L., Liu, X., Chen, J., Wen, X., Zhao, W., Liu, S., & Zhao, Q. (2024) · Nature Communications · doi:10.1038/s41467-024-50117-2 · Cited by 109
“Besides, after prolonged operation, the electrode material generates thermal strain due to the Joule heating effect 84,85 , which causes signi fi cant macroscopic deformation and may lead to mechanical losses of the material (Fig.”
Metadata
- Authors
- Heenan, T. M. M., Mombrini, I., Llewellyn, A., Checchia, S., Tan, C., Johnson, M. J., Jnawali, A., Garbarino, G., Jervis, R., Brett, D. J. L., Di Michiel, M., & Shearing, P. R.
- Venue
- Nature
- Published
- 2023-05-17
- Volume
- 617
- Issue
- 7961
- Pages
- 507-512
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W4376867105
- Cited by
- 222
- References
- 3
- FWCI
- 16.13
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mapping internal temperatures during high-rate battery applications. https://app.cochat.ai/papers/10.1038/s41586-023-05913-z
- The paper
- Heenan, T. M. M., Mombrini, I., Llewellyn, A., Checchia, S., Tan, C., Johnson, M. J., Jnawali, A., Garbarino, G., Jervis, R., Brett, D. J. L., Di Michiel, M., & Shearing, P. R. (2023). Mapping internal temperatures during high-rate battery applications. Nature. https://doi.org/10.1038/s41586-023-05913-z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.