CoChat

In situ laboratory for plastic degradation in the Red Sea

Open access

The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.

Abstract

Degradation and fragmentation of plastics in the environment are still poorly understood. This is partly caused by the lack of long-term studies and methods that determine weathering duration. We here present a novel study object that preserves information on plastic age: microplastic (MP) resin pellets from the wreck of the SS Hamada, a ship that foundered twenty-nine years ago at the coast of Wadi el Gemal national park, Egypt. Its sinking date enabled us to precisely determine how long MP rested in the wreck and a nearby beach, on which part of the load was washed off. Pellets from both sampling sites were analyzed by microscopy, X-ray tomography, spectroscopy, calorimetry, gel permeation chromatography, and rheology. Most pellets were made of low-density polyethylene, but a minor proportion also consisted of high-density polyethylene. MP from inside the wreck showed no signs of degradation compared to pristine reference samples. Contrary, beached plastics exhibited changes on all structural levels, which sometimes caused fragmentation. These findings provide further evidence that plastic degradation under saltwater conditions is comparatively slow, whereas UV radiation and high temperatures on beaches are major drivers of that process. Future long-term studies should focus on underlying mechanisms and timescales of plastic degradation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41598-022-15310-7

Cites

58 of 58 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Fate of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. (a) In the dark waters of the ship wreck, thousands of pellets floating up and down. (b) While some sacks fell off the ship and released fouled plastics to the surrounding sea floor after they have been torn open, other parts of the load (c) floated to the sea surface, from which they drifted to a nearby beach, which act as a highly covered plastic sink.
Figure 1 Fate of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. (a) In the dark waters of the ship wreck, thousands of pellets floating up and down. (b) While some sacks fell off the ship and released fouled plastics to the surrounding sea floor after they have been torn open, other parts of the load (c) floated to the sea surface, from which they drifted to a nearby beach, which act as a highly covered plastic sink.CC BY · PubMed Central
Figure 2 Fourier-transform infrared spectra measured on the inside of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. By comparison with a reference database, most MP were identified as LDPE. Their carbonyl index (1810–1550 cm-1) and the fingerprint area (< 1500 cm-1) revealed chemical modifications only in the case of MP from the beach.
Figure 2 Fourier-transform infrared spectra measured on the inside of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. By comparison with a reference database, most MP were identified as LDPE. Their carbonyl index (1810–1550 cm-1) and the fingerprint area (< 1500 cm-1) revealed chemical modifications only in the case of MP from the beach.CC BY · PubMed Central
Figure 3 Light microscopic images of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. Representative overview of different particle shapes and colors of MP from (a) the beach and (b) the SS Hamada wreck. The proportion of this properties varied within the sample, in which beige, white, and grey disk-like pellets were more frequent than yellow, black, red, or cylindrical particles (c.f. Supplementary Fig. S2 online and Supplementary Fig. S3 online). A complex network of cracks was only present on beached MP. Side views of particle surface revealed a lower level of abrasion for (c) MP from the beach compared to (d) the wreck. Scale bars: 1 mm.
Figure 3 Light microscopic images of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. Representative overview of different particle shapes and colors of MP from (a) the beach and (b) the SS Hamada wreck. The proportion of this properties varied within the sample, in which beige, white, and grey disk-like pellets were more frequent than yellow, black, red, or cylindrical particles (c.f. Supplementary Fig. S2 online and Supplementary Fig. S3 online). A complex network of cracks was only present on beached MP. Side views of particle surface revealed a lower level of abrasion for (c) MP from the beach compared to (d) the wreck. Scale bars: 1 mm.CC BY · PubMed Central
Figure 4 Slices of µCT scanned MP resin pellets from a nearby beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. Overviews of different MP from (a) the beach and (b) from SS Hamada wreck revealed several cavities that are most likely a result of production conditions. (c) Pellets from the beach often showed white spots that indicate the presence of minerals inside distinctive cracks. (d) 3D reconstructions of µCT slices exhibited that cracks (blue) formed a complex network which reached the inner part of beached MP. Further crack propagation will most likely lead to fragmentation of pellets into even smaller MP. Red dots indicate closed pores inside the pellet. Scale bars: 1 mm.
Figure 4 Slices of µCT scanned MP resin pellets from a nearby beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. Overviews of different MP from (a) the beach and (b) from SS Hamada wreck revealed several cavities that are most likely a result of production conditions. (c) Pellets from the beach often showed white spots that indicate the presence of minerals inside distinctive cracks. (d) 3D reconstructions of µCT slices exhibited that cracks (blue) formed a complex network which reached the inner part of beached MP. Further crack propagation will most likely lead to fragmentation of pellets into even smaller MP. Red dots indicate closed pores inside the pellet. Scale bars: 1 mm.CC BY · PubMed Central
Figure 5 Thermal DSC analysis of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. (a) Average of ten DSC curves for each sample site. The higher the melting peak in the heating runs, the higher the degree of crystallization. (b) Crystallinity of beached MP was higher than for pellets from the wreck. Values are given as mean ± s.e.m. for n = 10 replicates.
Figure 5 Thermal DSC analysis of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. (a) Average of ten DSC curves for each sample site. The higher the melting peak in the heating runs, the higher the degree of crystallization. (b) Crystallinity of beached MP was higher than for pellets from the wreck. Values are given as mean ± s.e.m. for n = 10 replicates.CC BY · PubMed Central
Figure 6 GPC results to study plastic degradation on a molecular level. We determined (a) number average molar mass (Mn) and (b) mass average molar mass (Mw) of MP resin pellets from the SS Hamada wreck in the Red Sea. No data for MP resin pellets from the beach is shown here as it was impossible to dissolve particles. Reference data for LDPE was obtained from the literature44. Values are given as mean ± s.e.m. for n = 5 replicates in case of MP from the SS Hamada wreck and n = 6 for reference data.
Figure 6 GPC results to study plastic degradation on a molecular level. We determined (a) number average molar mass (Mn) and (b) mass average molar mass (Mw) of MP resin pellets from the SS Hamada wreck in the Red Sea. No data for MP resin pellets from the beach is shown here as it was impossible to dissolve particles. Reference data for LDPE was obtained from the literature44. Values are given as mean ± s.e.m. for n = 5 replicates in case of MP from the SS Hamada wreck and n = 6 for reference data.CC BY · PubMed Central
Figure 7 Rheological properties of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. MP from the wreck showed a behavior typical for pristine PE, while beached pellets exhibited a more complex microstructure. (a) Log–log-scaled complex viscosity |η*| (Eq. 2). A Newtonian plateau at low frequencies was solely found for MP inside the wreck. (b) Storage modulus G´ (circles) and loss modulus G´´ (triangles) on a log–log scale. G´ was constantly higher than G´´ in the case of pellets from the wreck, which is typical for pristine LDPE. For beached MP, the opposite was observed. This indicates a more complex microstructure. (c) Loss tangents tan δ was always lower than one (solid line) in the case of beached pellets and higher than one for MP from the wreck. Note the logarithmic scale on the x-axis.
Figure 7 Rheological properties of MP resin pellets from a beach in the Wadi el Gemal national park, Egypt, and the SS Hamada wreck in the Red Sea. MP from the wreck showed a behavior typical for pristine PE, while beached pellets exhibited a more complex microstructure. (a) Log–log-scaled complex viscosity |η*| (Eq. 2). A Newtonian plateau at low frequencies was solely found for MP inside the wreck. (b) Storage modulus G´ (circles) and loss modulus G´´ (triangles) on a log–log scale. G´ was constantly higher than G´´ in the case of pellets from the wreck, which is typical for pristine LDPE. For beached MP, the opposite was observed. This indicates a more complex microstructure. (c) Loss tangents tan δ was always lower than one (solid line) in the case of beached pellets and higher than one for MP from the wreck. Note the logarithmic scale on the x-axis.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 58 references

Research works printed but not linked: 1

  1. Brümmer, F., Fritz, G. B., Jaklin, A. & Pfannkuchen, M. Sponge sampling: Developing a good scientific practice. in Resarch in Shallow Marine and Fresh Water Systems. 1st International Workshop Proceedings. Freiberg Online Geology. 22 9–11 (2009).

Cited by

See all 18

Metadata

Authors
Brümmer, F., Schnepf, U., Resch, J., Jemmali, R., Abdi, R., Kamel, H. M., Bonten, C., & Müller, R.-W.
Affiliations
  • University of Stuttgart (DE)
  • Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE)
Corresponding author
Brümmer, Franz
Venue
Scientific Reports
Published
2022-07-13
Volume
12
Issue
1
Pages
11956-11956
ISSN
2045-2322 (ISSN-L)
OpenAlex
W4285394950
Cited by
14
References
58
Citations by year
2026: 4 · 2025: 2 · 2024: 2 · 2023: 6
FWCI
0.59
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • OPUS Publication Server of the University of Stuttgart (University of Stuttgart) (publishedVersion, cc-by)
  • elib (German Aerospace Center) (acceptedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • OSF Preprints (OSF Preprints) (submittedVersion)
  • Universitätsbibliothek Stuttgart (cc-by)
Funders
Universität Stuttgart
Topics
  • Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords
plastic degradation, microplastics, low-density polyethylene, high-density polyethylene, plastic fragmentation, ultraviolet radiation, Red Sea
MeSH terms
Egypt, Environmental Monitoring, Plastics, Water Pollutants, Chemical, Indian Ocean, Polyethylene

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: In situ laboratory for plastic degradation in the Red Sea. https://app.cochat.ai/papers/10.1038/s41598-022-15310-7
The paper
Brümmer, F., Schnepf, U., Resch, J., Jemmali, R., Abdi, R., Kamel, H. M., Bonten, C., & Müller, R.-W. (2022). In situ laboratory for plastic degradation in the Red Sea. Scientific Reports. https://doi.org/10.1038/s41598-022-15310-7

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.