The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
A Highly Reversible Lithium Metal Anode
Open accessAbstract
Lithium metal has shown a lot of promise for use as an anode material in rechargeable batteries owing to its high theoretical capacity. However, it does not meet the cycle life and safety requirements of rechargeable batteries owing to electrolyte decomposition and dendrite formation on the surfaces of the lithium anodes during electrochemical cycling. Here, we propose a novel electrolyte system that is relatively stable against lithium metal and mitigates dendritic growth. Systematic design methods that combined simulations, model-based experiments, and in situ analyses were employed to design the system. The reduction potential of the solvent, the size of the salt anions, and the viscosity of the electrolyte were found to be critical parameters determining the rate of dendritic growth. A lithium metal anode in contact with the designed electrolyte exhibited remarkable cyclability (more than 100 cycles) at a high areal capacity of 12 mAh cm(-2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Quantum Mechanical Continuum Solvation Models
Tomasi, J., Mennucci, B., & Cammi, R. (2005) · Chemical Reviews · doi:10.1021/cr9904009 · Cited by 16,868
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Principles of Condensed Matter Physics
Chaikin, P. M., & Lubensky, T. C. (1995) · Cambridge University Press eBooks · doi:10.1017/cbo9780511813467 · Cited by 3,503
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
A Reversible and Higher-Rate Li-O 2 Battery
Peng, Z., Freunberger, S. A., Chen, Y., & Bruce, P. G. (2012) · Science · doi:10.1126/science.1223985 · Cited by 1,915
Single-ion BAB triblock copolymers as highly efficient electrolytes for lithium-metal batteries
Bouchet, R., Maria, S., Meziane, R., Aboulaich, A., Lienafa, L., Bonnet, J.-P., Phan, T. N. T., Bertin, D., Gigmes, D., Devaux, D., et al. (2013) · Nature Materials · doi:10.1038/nmat3602 · Cited by 1,425
An improved high-performance lithium–air battery
Jung, H.-G., Hassoun, J., Park, J.-B., Sun, Y.-K., & Scrosati, B. (2012) · Nature Chemistry · doi:10.1038/nchem.1376 · Cited by 1,089
Yoshida, K., Nakamura, M., Kazue, Y., Tachikawa, N., Tsuzuki, S., Seki, S., Dokko, K., & Watanabe, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203983r · Cited by 828
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Ue, M. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059336 · Cited by 526
High Lithium Metal Cycling Efficiency in a Room-Temperature Ionic Liquid
Howlett, P. C., MacFarlane, D. R., & Hollenkamp, A. F. (2004) · Electrochemical and Solid-State Letters · doi:10.1149/1.1664051 · Cited by 479
Impedance Spectroscopy Study of PEO-Based Nanocomposite Polymer Electrolytes
Scrosati, B., Croce, F., & Persi, L. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393423 · Cited by 424
Factors Which Limit the Cycle Life of Rechargeable Lithium (Metal) Batteries
Aurbach, D., Zinigrad, E., Teller, H., & Dan, P. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393349 · Cited by 340
Aurbach, D., Zaban, A., Gofer, Y., Ely, Y. E., Weissman, I., Chusid, O., & Abramson, O. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02044-4 · Cited by 262
Capiglia, C. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(98)00457-3 · Cited by 259
In situ preparation of poly(ethylene oxide)–SiO2 composite polymer electrolytes
Liu, Y., Lee, J. Y., & Hong, L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.11.026 · Cited by 218
Suppression of dendritic lithium formation by using concentrated electrolyte solutions
Jeong, S.-K., Seo, H.-Y., Kim, D.-H., Han, H.-K., Kim, J.-G., Lee, Y. B., Iriyama, Y., Abe, T., & Ogumi, Z. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.02.006 · Cited by 211
Protection of lithium metal surfaces using tetraethoxysilane
Umeda, G. A., Menke, E., Richard, M., Stamm, K. L., Wudl, F., & Dunn, B. (2011) · J. Mater. Chem. · doi:10.1039/c0jm02305a · Cited by 187
Studies on the Anode/Electrolyte Interfacein Lithium Ion Batteries
Winter, M., Appel, W. K., Evers, B., Hodal, T., Möller, K., Schneider, I., Wachtler, M., Wagner, M. R., Wrodnigg, G. H., & Besenhard, J. O. (2001) · Monatshefte für Chemie - Chemical Monthly · doi:10.1007/s007060170110 · Cited by 151
Influence of Electrolyte on Lithium Cycling Efficiency with Pressurized Electrode Stack
Hirai, T., Yoshimatsu, I., & Yamaki, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054778 · Cited by 127
Effects of physical constraints on Li cyclability
Wilkinson, D. P., Blom, H. P., Brandt, K., & Wainwright, D. (1991) · Journal of Power Sources · doi:10.1016/0378-7753(91)80077-b · Cited by 98
Ota, H., Wang, X.-M., & Yasukawa, E. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1644136 · Cited by 88
Studies on the Anode/Electrolyte Interface in Lithium Ion Batteries
Winter, M., Appel, W. K., Evers, B., et al. (2001) · Springer eBooks · doi:10.1007/978-3-7091-6211-8_6 · Cited by 58
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Metadata
- Authors
- Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O.
- Venue
- Scientific Reports
- Published
- 2014-01-22
- Volume
- 4
- Issue
- 1
- Pages
- 3815-3815
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W1982339678
- Cited by
- 339
- References
- 28
- FWCI
- 17.69
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.