The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
A Highly Reversible Lithium Metal Anode
Open accessAbstract
Lithium metal has shown a lot of promise for use as an anode material in rechargeable batteries owing to its high theoretical capacity. However, it does not meet the cycle life and safety requirements of rechargeable batteries owing to electrolyte decomposition and dendrite formation on the surfaces of the lithium anodes during electrochemical cycling. Here, we propose a novel electrolyte system that is relatively stable against lithium metal and mitigates dendritic growth. Systematic design methods that combined simulations, model-based experiments, and in situ analyses were employed to design the system. The reduction potential of the solvent, the size of the salt anions, and the viscosity of the electrolyte were found to be critical parameters determining the rate of dendritic growth. A lithium metal anode in contact with the designed electrolyte exhibited remarkable cyclability (more than 100 cycles) at a high areal capacity of 12 mAh cm(-2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Quantum Mechanical Continuum Solvation Models
Tomasi, J., Mennucci, B., & Cammi, R. (2005) · Chemical Reviews · doi:10.1021/cr9904009 · Cited by 16,868
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Principles of Condensed Matter Physics
Chaikin, P. M., & Lubensky, T. C. (1995) · Cambridge University Press eBooks · doi:10.1017/cbo9780511813467 · Cited by 3,503
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
A Reversible and Higher-Rate Li-O 2 Battery
Peng, Z., Freunberger, S. A., Chen, Y., & Bruce, P. G. (2012) · Science · doi:10.1126/science.1223985 · Cited by 1,915
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Guo, Y., Li, H., & Zhai, T. (2017) · Advanced Materials · doi:10.1002/adma.201700007 · Cited by 1,215
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Chen, J., Fan, X., Li, Q., Yang, H., Khoshi, M. R., Xu, Y., Hwang, S., Chen, L., Ji, X., Yang, C., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0601-1 · Cited by 1,137
A Highly Reversible Room-Temperature Sodium Metal Anode
Seh, Z. W., Sun, J., Sun, Y., & Cui, Y. (2015) · ACS Central Science · doi:10.1021/acscentsci.5b00328 · Cited by 979
Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Fan, X., Chen, L., Ji, X., Deng, T., Hou, S., Chen, J., Zheng, J., Wang, F., Jiang, J., Xu, K., et al. (2018) · Chem · doi:10.1016/j.chempr.2017.10.017 · Cited by 961
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Cao, X., Ren, X., Zou, L., Engelhard, M. H., Huang, W., Wang, H., Matthews, B. E., Lee, H., Niu, C., Arey, B. W., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0464-5 · Cited by 930
Wood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Li plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Lu, Q., He, Y., Yu, Q., Li, B., Kaneti, Y. V., Yao, Y., Kang, F., & Yang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201604460 · Cited by 727
Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries
Suo, L., Xue, W., Gobet, M., Greenbaum, S. G., Wang, C., Chen, Y., Yang, W., Li, Y., & Li, J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712895115 · Cited by 679
Flexible Zn– and Li–air batteries: recent advances, challenges, and future perspectives
Tan, P., Chen, B., Xu, H., Zhang, H., Cai, W., Ni, M., Liu, M., & Shao, Z. (2017) · Energy Environ. Sci. · doi:10.1039/c7ee01913k · Cited by 583
Liu, Y., Lin, D., Li, Y., Chen, G., Pei, A., Nix, O., Li, Y., & Cui, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-06077-5 · Cited by 570
Lithium metal anodes: Present and future
Wang, R., Cui, W., Chu, F., & Wu, F. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.12.024 · Cited by 544
Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
High-Concentration Ether Electrolytes for Stable High-Voltage Lithium Metal Batteries
Ren, X., Zou, L., Jiao, S., Mei, D., Engelhard, M. H., Li, Q., Lee, H., Niu, C., Adams, B. D., Wang, C., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00381 · Cited by 502
Aluminium-ion batteries: developments and challenges
Das, S. K., Mahapatra, S., & Lahan, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00228a · Cited by 458
Markevich, E., Salitra, G., Chesneau, F., Schmidt, M., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00300 · Cited by 453
Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes
Alvarado, J., Schroeder, M. A., Pollard, T. P., Wang, X., Lee, J. Z., Zhang, M., Wynn, T., Ding, M., Borodin, O., Meng, Y. S., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02601g · Cited by 439
Design strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes
Li, M., Lu, J., Ji, X., Li, Y., Shao, Y., Chen, Z., Zhong, C., & Amine, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0166-4 · Cited by 438
Interface chemistry of an amide electrolyte for highly reversible lithium metal batteries
Wang, Q., Yao, Z., Zhao, C., Verhallen, T., Tabor, D. P., Liu, M., Ooms, F., Kang, F., Aspuru-Guzik, A., Hu, Y.-S., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17976-x · Cited by 427
Zhou, D., Liu, R., He, Y., Li, F., Liu, M., Li, B., Yang, Q., Cai, Q., & Kang, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502214 · Cited by 408
Super Soft All-Ethylene Oxide Polymer Electrolyte for Safe All-Solid Lithium Batteries
Porcarelli, L., Gerbaldi, C., Bella, F., & Nair, J. R. (2016) · Scientific Reports · doi:10.1038/srep19892 · Cited by 383
Liquefied gas electrolytes for electrochemical energy storage devices
Rustomji, C. S., Yang, Y., Kim, T. K., Mac, J., Kim, Y. J., Caldwell, E., Chung, H., & Meng, Y. S. (2017) · Science · doi:10.1126/science.aal4263 · Cited by 382
Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
Kazyak, E., Wood, K. N., & Dasgupta, N. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02789 · Cited by 356
Recent Developments of the Lithium Metal Anode for Rechargeable Non‐Aqueous Batteries
Zhang, K., Lee, G., Park, M., Li, W., & Kang, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600811 · Cited by 345
Self-citationDendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
High‐Fluorinated Electrolytes for Li–S Batteries
Zheng, J., Ji, G., Fan, X., Chen, J., Li, Q., Wang, H., Yang, Y., DeMella, K. C., Raghavan, S. R., & Wang, C. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803774 · Cited by 331
Sulfur‐Based Composite Cathode Materials for High‐Energy Rechargeable Lithium Batteries
Wang, J., He, Y., & Yang, J. (2015) · Advanced Materials · doi:10.1002/adma.201402569 · Cited by 331
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
Waldmann, T., Iturrondobeitia, A., Kasper, M., Ghanbari, N., Aguesse, F., Bekaert, E., Daniel, L., Genies, S., Gordon, I. J., Löble, M. W., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1211609jes · Cited by 328
High-Performance Lithium Metal Negative Electrode with a Soft and Flowable Polymer Coating
Zheng, G., Wang, C., Pei, A., Lopez, J., Shi, F., Chen, Z., Sendek, A. D., Lee, H.-W., Lu, Z., Schneider, H., et al. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00456 · Cited by 328
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal
Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Insights into the deposition chemistry of Li ions in nonaqueous electrolyte for stable Li anodes
Wang, Z., Sun, Z., Li, J., Shi, Y., Sun, C., An, B., Cheng, H.-M., & Li, F. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01017k · Cited by 268
Thenuwara, A. C., Shetty, P. P., Kondekar, N., Sandoval, S. E., Cavallaro, K., May, R., Yang, C.-T., Marbella, L. E., Qi, Y., & McDowell, M. T. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01209 · Cited by 264
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Observation of Lithium Dendrites at Ambient Temperature and Below
Love, C. T., Baturina, O. A., & Swider-Lyons, K. E. (2014) · ECS Electrochemistry Letters · doi:10.1149/2.0041502eel · Cited by 166
Localized high concentration electrolyte behavior near a lithium–metal anode surface
Zheng, Y., Soto, F. A., Ponce, V., Seminario, J. M., Cao, X., Zhang, J.-G., & Balbuena, P. B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta08935g · Cited by 123
He, J., Tao, T., Yang, F., & Sun, Z. (2022) · ChemSusChem · doi:10.1002/cssc.202102522 · Cited by 29
Metadata
- Authors
- Park, M. S., Ma, S. B., Lee, D. J., Im, D., Doo, S.-G., & Yamamoto, O.
- Venue
- Scientific Reports
- Published
- 2014-01-22
- Volume
- 4
- Issue
- 1
- Pages
- 3815-3815
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W1982339678
- Cited by
- 339
- References
- 28
- FWCI
- 17.69
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.