The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Ultrathin Nickel Hydroxide and Oxide Nanosheets: Synthesis, Characterizations and Excellent Supercapacitor Performances
Open accessAbstract
High-quality ultrathin two-dimensional nanosheets of α-Ni(OH)2 are synthesized at large scale via microwave-assisted liquid-phase growth under low-temperature atmospheric conditions. After heat treatment, non-layered NiO nanosheets are obtained while maintaining their original frame structure. The well-defined and freestanding nanosheets exhibit a micron-sized planar area and ultrathin thickness (<2 nm), suggesting an ultrahigh surface atom ratio with unique surface and electronic structure. The ultrathin 2D nanostructure can make most atoms exposed outside with high activity thus facilitate the surface-dependent electrochemical reaction processes. The ultrathin α-Ni(OH)2 and NiO nanosheets exhibit enhanced supercapacitor performances. Particularly, the α-Ni(OH)2 nanosheets exhibit a maximum specific capacitance of 4172.5 F g(-1) at a current density of 1 A g(-1). Even at higher rate of 16 A g(-1), the specific capacitance is still maintained at 2680 F g(-1) with 98.5% retention after 2000 cycles. Even more important, we develop a facile and scalable method to produce high-quality ultrathin transition metal hydroxide and oxide nanosheets and make a possibility in commercial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ATHENA,ARTEMIS,HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT
Ravel, B., & Newville, M. (2005) · Journal of Synchrotron Radiation · doi:10.1107/s0909049505012719 · Cited by 16,965
Carbon-Based Supercapacitors Produced by Activation of Graphene
Zhu, Y., Murali, S., Stoller, M. D., Ganesh, K. J., Cai, W., Ferreira, P. J., Pirkle, A., Wallace, R. M., Cychosz, K. A., Thommes, M., et al. (2011) · Science · doi:10.1126/science.1200770 · Cited by 6,140
Self-citationNi(OH) 2 Nanoplates Grown on Graphene as Advanced Electrochemical Pseudocapacitor Materials
Wang, H., Casalongue, H. S., Liang, Y., & Dai, H. (2010) · Journal of the American Chemical Society · doi:10.1021/ja102267j · Cited by 2,042
Yuan, C., Li, J., Hou, L., Zhang, X., Shen, L., & Lou, X. W. (. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200994 · Cited by 1,688
Zhou, C., Zhang, Y., Li, Y., & Liu, J. (2013) · Nano Letters · doi:10.1021/nl400378j · Cited by 1,341
Self-citationGuo, S., & Dong, S. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00079e · Cited by 1,293
Microwave chemistry for inorganic nanomaterials synthesis
Bilecka, I., & Niederberger, M. (2010) · Nanoscale · doi:10.1039/b9nr00377k · Cited by 1,169
Feng, J., Sun, X., Wu, C., Peng, L., Lin, C., Hu, S., Yang, J., & Xie, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207176c · Cited by 1,143
Nanoporous Ni(OH)2 Thin Film on 3D Ultrathin-Graphite Foam for Asymmetric Supercapacitor
Ji, J., Zhang, L. L., Ji, H., Li, Y., Zhao, X., Bai, X., Fan, X., Zhang, F., & Ruoff, R. S. (2013) · ACS Nano · doi:10.1021/nn4021955 · Cited by 1,072
Self-citationTang, Z., Tang, C., & Gong, H. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102796 · Cited by 863
Cited by
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
Tan, C., Cao, X., Wu, X.-J., He, Q., Yang, J., Zhang, X., Chen, J., Zhao, W., Han, S., Nam, G.-H., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00558 · Cited by 5,100
Recent Advances in Two-Dimensional Nanomaterials for Supercapacitor Electrode Applications
Kumar, K. S., Choudhary, N., Jung, Y., & Thomas, J. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01169 · Cited by 779
Zhao, Y., Jia, X., Chen, G., Shang, L., Waterhouse, G. I. N., Wu, L.-Z., Tung, C.-H., O’Hare, D., & Zhang, T. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b01606 · Cited by 730
Interface-Assisted Synthesis of 2D Materials: Trend and Challenges
Dong, R., Zhang, T., & Feng, X. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00056 · Cited by 710
Wet-chemical synthesis and applications of non-layer structured two-dimensional nanomaterials
Tan, C., & Zhang, H. (2015) · Nature Communications · doi:10.1038/ncomms8873 · Cited by 651
Mixed-metallic MOF based electrode materials for high performance hybrid supercapacitors
Jiao, Y., Pei, J., Chen, D., Yan, C., Hu, Y., Zhang, Q., & Chen, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09805c · Cited by 558
Two‐Dimensional Metal Oxide Nanomaterials for Next‐Generation Rechargeable Batteries
Mei, J., Liao, T., Kou, L., & Sun, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700176 · Cited by 459
Jun, B.-M., Kim, S., Heo, J., Park, C. M., Her, N., Jang, M., Huang, Y., Han, J., & Yoon, Y. (2019) · Nano Research · doi:10.1007/s12274-018-2225-3 · Cited by 457
Yin, H., & Tang, Z. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00343e · Cited by 451
Ma, H., He, J., Xiong, D.-B., Wu, J., Li, Q., Dravid, V., & Zhao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10280 · Cited by 396
Layered and two dimensional metal oxides for electrochemical energy conversion
Browne, M. P., Sofer, Z., & Pumera, M. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02495b · Cited by 396
Emergent Pseudocapacitance of 2D Nanomaterials
Yu, X., Yun, S., Yeon, J. S., Bhattacharya, P., Wang, L., Lee, S. W., Hu, X., & Park, H. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702930 · Cited by 387
Nickel-based materials for supercapacitors
Zhang, L., Shi, D., Liu, T., Jaroniec, M., & Yu, J. (2019) · Materials Today · doi:10.1016/j.mattod.2018.11.002 · Cited by 370
2D Metallic Transition‐Metal Dichalcogenides: Structures, Synthesis, Properties, and Applications
Zhao, B., Shen, D., Zhang, Z., Lu, P., Hossain, M., Li, J., Li, B., & Duan, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105132 · Cited by 359
Liu, Z., Zhang, C., Liu, H., & Feng, L. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119165 · Cited by 350
Topochemical synthesis of 2D materials
Xiao, X., Wang, H., Urbankowski, P., & Gogotsi, Y. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00649k · Cited by 317
Nickel Vacancies Boost Reconstruction in Nickel Hydroxide Electrocatalyst
He, Q., Wan, Y., Jiang, H., Pan, Z., Wu, C., Wang, M., Wu, X., Ye, B., Ajayan, P. M., & Song, L. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00515 · Cited by 306
In-Situ-Grown Mg(OH)2-Derived Hybrid α-Ni(OH)2 for Highly Stable Supercapacitor
Xie, M., Duan, S., Shen, Y., Fang, K., Wang, Y., Lin, M., & Guo, X. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00258 · Cited by 280
Engineering 2D Architectures toward High‐Performance Micro‐Supercapacitors
Da, Y., Liu, J., Zhou, L., Zhu, X., Chen, X., & Fu, L. (2019) · Advanced Materials · doi:10.1002/adma.201802793 · Cited by 253
Xu, J., Li, X., Liu, W., Sun, Y., Ju, Z., Yao, T., Wang, C., Ju, H., Zhu, J., Wei, S., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704928 · Cited by 253
Metadata
- Authors
- Zhu, Y., Cao, C., Tao, S., Chu, W., Wu, Z., & Li, Y.
- Venue
- Scientific Reports
- Published
- 2014-08-29
- Volume
- 4
- Issue
- 1
- Pages
- 5787-5787
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2017393564
- Cited by
- 424
- References
- 35
- FWCI
- 17.96
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.