The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Molecular Origin of Strength and Stiffness in Bamboo Fibrils
Open accessAbstract
Bamboo, a fast-growing grass, has a higher strength-to-weight ratio than steel and concrete. The unique properties of bamboo come from the natural composite structure of fibers that consists mainly of cellulose microfibrils in a matrix of intertwined hemicellulose and lignin called lignin-carbohydrate complex (LCC). Here, we have used atomistic simulations to study the mechanical properties of and adhesive interactions between the materials in bamboo fibers. With this aim, we have developed molecular models of lignin, hemicellulose and LCC structures to study the elastic moduli and the adhesion energies between these materials and cellulose microfibril faces. Good agreement was observed between the simulation results and experimental data. It was also shown that the hemicellulose model has stronger mechanical properties than lignin while lignin exhibits greater tendency to adhere to cellulose microfibrils. The study suggests that the abundance of hydrogen bonds in hemicellulose chains is responsible for improving the mechanical behavior of LCC. The strong van der Waals forces between lignin molecules and cellulose microfibril is responsible for higher adhesion energy between LCC and cellulose microfibrils. We also found out that the amorphous regions of cellulose microfibrils are the weakest interfaces in bamboo fibrils. Hence, they determine the fibril strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hansen, J. P., McDonald, I. R., & Henderson, D. J. (1976) · Cited by 7,860
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
DREIDING: a generic force field for molecular simulations
Mayo, S. L., Olafson, B. D., & Goddard, W. A. (1990) · The Journal of Physical Chemistry · doi:10.1021/j100389a010 · Cited by 6,585
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Scheller, H. V., & Ulvskov, P. (2010) · Annual Review of Plant Biology · doi:10.1146/annurev-arplant-042809-112315 · Cited by 2,799
Lignin chemistry?past, present and future
Adler, E. (1977) · Wood Science and Technology · doi:10.1007/bf00365615 · Cited by 1,759
The COMPASS force field: parameterization and validation for phosphazenes
Sun, H., Ren, P., & Fried, J. R. (1998) · Computational and Theoretical Polymer Science · doi:10.1016/s1089-3156(98)00042-7 · Cited by 1,549
Xiao, B., Sun, X. F., & Sun, R. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00163-x · Cited by 840
Elastic modulus of single cellulose microfibrils from tunicate measured by atomic force microscopy
Iwamoto, S., Kai, W., Isogai, A., & Iwata, T. (2009) · Biomacromolecules · doi:10.1021/bm900520n · Cited by 754
Nanostructure of cellulose microfibrils in spruce wood
Fernandes, A. N., Thomas, L. H., Altaner, C. M., Callow, P., Forsyth, V. T., Apperley, D. C., Kennedy, C. J., & Jarvis, M. C. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1108942108 · Cited by 737
VANHOLME, R., MORREEL, K., RALPH, J., & BOERJAN, W. (2008) · Current Opinion in Plant Biology · doi:10.1016/j.pbi.2008.03.005 · Cited by 653
Elastic modulus of the crystalline regions of cellulose polymorphs
Nishino, T., Takano, K., & Nakamae, K. (1995) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1995.090331110 · Cited by 581
The Maize Primary Cell Wall Microfibril: A New Model Derived from Direct Visualization
Ding, S.-Y., & Himmel, M. E. (2006) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf051851z · Cited by 551
Lignocellulose biodegradation: Fundamentals and applications
Malherbe, S., & Cloete, T. E. (2002) · Reviews in Environmental Science and Biotechnology · doi:10.1023/a:1020858910646 · Cited by 484
Molecular dynamics simulations of deformation mechanisms of amorphous polyethylene
Hossain, D., Tschopp, M. A., Ward, D. K., Bouvard, J. L., Wang, P., & Horstemeyer, M. F. (2010) · Polymer · doi:10.1016/j.polymer.2010.10.009 · Cited by 462
Momany, F. A., Carruthers, L. M., McGuire, R. F., & Scheraga, H. A. (1974) · The Journal of Physical Chemistry · doi:10.1021/j100609a005 · Cited by 457
Hosoya, T., Kawamoto, H., & Saka, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.01.006 · Cited by 448
Molecular Dynamics Simulations of Bulk Native Crystalline and Amorphous Structures of Cellulose
Mazeau, K., & Heux, L. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0219395 · Cited by 396
Beech Lignin—Proposal of a Constitutional Scheme
Nimz, H. (1974) · Angewandte Chemie International Edition in English · doi:10.1002/anie.197403131 · Cited by 378
Atomic Force Microscopy Characterization of Cellulose Nanocrystals
Lahiji, R. R., Xu, X., Reifenberger, R., Raman, A., Rudie, A., & Moon, R. J. (2010) · Langmuir · doi:10.1021/la903111j · Cited by 368
Micromechanical understanding of the cell-wall structure
Salmén, L. (2004) · Comptes Rendus. Biologies · doi:10.1016/j.crvi.2004.03.010 · Cited by 343
Cell wall properties and their effects on the mechanical properties of fibers
Bergander, A., & Salmén, L. (2002) · Journal of Materials Science · doi:10.1023/a:1013115925679 · Cited by 299
Young's modulus of hemicellulose as related to moisture content
Cousins, W. J. (1978) · Wood Science and Technology · doi:10.1007/bf00372862 · Cited by 270
The new forestry biofuels sector
Pu, Y., Zhang, D., Singh, P. M., & Ragauskas, A. J. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.48 · Cited by 270
Anisotropic Elastic Properties of Cellulose Measured Using Inelastic X-ray Scattering
Diddens, I., Murphy, B., Krisch, M., & Müller, M. (2008) · Macromolecules · doi:10.1021/ma801796u · Cited by 247
Nishiyama, Y., Johnson, G. P., French, A. D., Forsyth, V. T., & Langan, P. (2008) · Biomacromolecules · doi:10.1021/bm800726v · Cited by 244
Biodegradation of lignin-carbohydrate complexes
Jeffries, T. W. (1990) · Biodegradation · doi:10.1007/bf00058834 · Cited by 222
A structural model of softwood lignin
Sakakibara, A. (1980) · Wood Science and Technology · doi:10.1007/bf00584038 · Cited by 204
Molecular response of a glassy polymer to active deformation
Capaldi, F. M., Boyce, M. C., & Rutledge, G. C. (2004) · Polymer · doi:10.1016/j.polymer.2003.07.011 · Cited by 190
Kulasinski, K., Keten, S., Churakov, S. V., Derome, D., & Carmeliet, J. (2014) · Cellulose · doi:10.1007/s10570-014-0213-7 · Cited by 188
Dri, F. L., Hector, L. G., Moon, R. J., & Zavattieri, P. D. (2013) · Cellulose · doi:10.1007/s10570-013-0071-8 · Cited by 167
Estimation of the Elastic Modulus of Cellulose Crystal by Molecular Mechanics Simulation
Tanaka, F., & Iwata, T. (2006) · Cellulose · doi:10.1007/s10570-006-9068-x · Cited by 156
Delignification of rye straw using hydrogen peroxide
Sun, R. C., Fang, J., & Tomkinson, J. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(00)00039-x · Cited by 142
Modeling Crystal and Molecular Deformation in Regenerated Cellulose Fibers
Eichhorn, S. J., Young, R. J., & Davies, G. R. (2004) · Biomacromolecules · doi:10.1021/bm049409x · Cited by 125
Molecular deformation mechanisms of the wood cell wall material
Jin, K., Zhao Qin, A., & Buehler, M. J. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.11.010 · Cited by 117
Besombes, S., & Mazeau, K. (2005) · Plant Physiology and Biochemistry · doi:10.1016/j.plaphy.2005.02.004 · Cited by 106
Sathitsuksanoh, N., Zhu, Z., Ho, T.-J., Bai, M., & Zhang, Y. ‐. P. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.09.081 · Cited by 102
Besombes, S., & Mazeau, K. (2005) · Plant Physiology and Biochemistry · doi:10.1016/j.plaphy.2005.02.005 · Cited by 94
Lindner, B., Petridis, L., Schulz, R., & Smith, J. C. (2013) · Biomacromolecules · doi:10.1021/bm400442n · Cited by 78
Dimensions of Biological Cellulose Nanocrystals Maximize Fracture Strength
Sinko, R., Mishra, S., Ruiz, L., Brandis, N., & Keten, S. (2014) · ACS Macro Letters · doi:10.1021/mz400471y · Cited by 73
Regis, S., Youssefian, S., Jassal, M., Phaneuf, M. D., Rahbar, N., & Bhowmick, S. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34843 · Cited by 37
Self-citationStudies on Hemicellulose of Bamboo
Maekawa, E. (1976) · Kyoto University Research Information Repository (Kyoto University) · Cited by 22
Nano-scale adhesion in multilayered drug eluting stents
Youssefian, S., & Rahbar, N. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.11.001 · Cited by 20
Self-citationMechanics of Cellulose Nanocrystals and their Polymer Composites
Pakzad, A., & Yassar, R. S. (2010) · Advanced structured materials · doi:10.1007/8611_2010_38 · Cited by 8
Cited by
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Lancefield, C. S., Panovic, I., Deuss, P. J., Barta, K., & Westwood, N. J. (2017) · Green Chemistry · doi:10.1039/c6gc02739c · Cited by 300
Metadata
- Authors
- Youssefian, S., & Rahbar, N.
- Venue
- Scientific Reports
- Published
- 2015-06-08
- Volume
- 5
- Issue
- 1
- Pages
- 11116-11116
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2443698433
- Cited by
- 261
- References
- 44
- FWCI
- 18.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.