The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
High-performance perovskite CH3NH3PbI3 thin films for solar cells prepared by single-source physical vapour deposition
Open accessAbstract
In this work, an alternative route to fabricating high-quality CH 3 NH 3 PbI 3 thin films is proposed. Single-source physical vapour deposition (SSPVD) without a post-heat-treating process was used to prepare CH 3 NH 3 PbI 3 thin films at room temperature. This new process enabled complete surface coverage and moisture stability in a non-vacuum solution. Moreover, the challenges of simultaneously controlling evaporation processes of the organic and inorganic sources via dual-source vapour evaporation and the heating process required to obtain high crystallization were avoided. Excellent composition with stoichiometry transferred from the powder material, a high level of tetragonal phase-purity, full surface coverage, well-defined grain structure, high crystallization and reproducibility were obtained. A PCE of approximately 10.90% was obtained with a device based on SSPVD CH 3 NH 3 PbI 3. These initial results suggest that SSPVD is a promising method to significantly optimize perovskite CH 3 NH 3 PbI 3 solar cell efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Cited by
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Vapor-Deposited Perovskites: The Route to High-Performance Solar Cell Production?
Ávila, J., Momblona, C., Boix, P. P., Sessolo, M., & Bolink, H. J. (2017) · Joule · doi:10.1016/j.joule.2017.07.014 · Cited by 379
Ouslimane, T., Et-taya, L., Elmaimouni, L., & Benami, A. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e06379 · Cited by 367
Solvent Engineering of the Precursor Solution toward Large‐Area Production of Perovskite Solar Cells
Chao, L., Niu, T., Gao, W., Ran, C., Song, L., Chen, Y., & Huang, W. (2021) · Advanced Materials · doi:10.1002/adma.202005410 · Cited by 354
A Review on Scaling Up Perovskite Solar Cells
Li, D., Zhang, D., Lim, K., Hu, Y., Rong, Y., Mei, A., Park, N., & Han, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008621 · Cited by 284
Self-citationThe Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?
Vaynzof, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202003073 · Cited by 272
Metadata
- Authors
- Fan, P., Gu, D., Liang, G.-X., Luo, J.-T., Chen, J.-L., Zheng, Z.-H., & Zhang, D.-P.
- Venue
- Scientific Reports
- Published
- 2016-07-18
- Volume
- 6
- Issue
- 1
- Pages
- 29910-29910
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2476248816
- Cited by
- 216
- References
- 3
- FWCI
- 9.30
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.