CoChat

Particle Size Controls on Water Adsorption and Condensation Regimes at Mineral Surfaces

Open access
Yeşilbaş, Merve, Boily, Jean-François · 2016 · Scientific Reports

The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.

Abstract

Atmospheric water vapour interacting with hydrophilic mineral surfaces can produce water films of various thicknesses and structures. In this work we show that mineral particle size controls water loadings achieved by water vapour deposition on 21 contrasting mineral samples exposed to atmospheres of up to ~16 Torr water (70% relative humidity at 25 °C). Submicrometer-sized particles hosted up to ~5 monolayers of water, while micrometer-sized particles up to several thousand monolayers. All films exhibited vibrational spectroscopic signals akin to liquid water, yet with a disrupted network of hydrogen bonds. Water adsorption isotherms were predicted using models (1- or 2- term Freundlich and Do-Do models) describing an adsorption and a condensation regime, respectively pertaining to the binding of water onto mineral surfaces and water film growth by water-water interactions. The Hygroscopic Growth Theory could also account for the particle size dependence on condensable water loadings under the premise that larger particles have a greater propensity of exhibiting of surface regions and interparticle spacings facilitating water condensation reactions. Our work should impact our ability to predict water film formation at mineral surfaces of contrasting particle sizes and should thus contribute to our understanding of water adsorption and condensation reactions occuring in nature.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep32136

Cites

65 of 65 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic representation of water vapour binding at mineral surfaces.(a) The adsorption regime, also involving formation of water clusters. (b) Completion of the adsorption regime involving a monolayer. (c) The condensation regime dominated by water-water interactions. (d) Condensation of water in capillaries/pores of mineral surfaces. (e) Interparticle condensation of water in homogeneous (e.g. spray deposition) and heterogeneous (e.g. by rash deposition) of particles on a substrate.
Figure 1 Schematic representation of water vapour binding at mineral surfaces.(a) The adsorption regime, also involving formation of water clusters. (b) Completion of the adsorption regime involving a monolayer. (c) The condensation regime dominated by water-water interactions. (d) Condensation of water in capillaries/pores of mineral surfaces. (e) Interparticle condensation of water in homogeneous (e.g. spray deposition) and heterogeneous (e.g. by rash deposition) of particles on a substrate.CC BY · PubMed Central
Figure 2 SEM and TEM images of minerals under this study.
Figure 2 SEM and TEM images of minerals under this study.CC BY · PubMed Central
Figure 3 DVS (25 °C) results of mineral under study. (a) Gibbsite and Do-Do (Equation 4) modelling showing concurrent adsorption and condensation regimes. (a–c) Results for submicron-sized minerals, including expandable montmorillonite (c). (d–f) Results for micron-sized minerals.
Figure 3 DVS (25 °C) results of mineral under study. (a) Gibbsite and Do-Do (Equation 4) modelling showing concurrent adsorption and condensation regimes. (a–c) Results for submicron-sized minerals, including expandable montmorillonite (c). (d–f) Results for micron-sized minerals.CC BY · PubMed Central
Figure 4 Representative FTIR spectra of thin water films at mineral surfaces at 25 °C. See example of water vapour binding experiment for the case of illite in Fig. S1. The symbols “*” in goethite, lath lepidocrocite, rod lepidocrocite and akaganéite denote losses in surface22930 (and bulk in akaganéite, cf. Song and Boily57) OH groups caused by water binding.
Figure 4 Representative FTIR spectra of thin water films at mineral surfaces at 25 °C. See example of water vapour binding experiment for the case of illite in Fig. S1. The symbols “*” in goethite, lath lepidocrocite, rod lepidocrocite and akaganéite denote losses in surface22930 (and bulk in akaganéite, cf. Song and Boily57) OH groups caused by water binding.CC BY · PubMed Central
Figure 5 Water loading dependence on (a) particle size and (b) specific surface area of the 21 minerals under study. The Hygroscopic Growth Theory using κ = 1 provides a general description of the condensable water loadings achieved at mineral particles (Equations 1, 2, 3) log10.
Figure 5 Water loading dependence on (a) particle size and (b) specific surface area of the 21 minerals under study. The Hygroscopic Growth Theory using κ = 1 provides a general description of the condensable water loadings achieved at mineral particles (Equations 1, 2, 3) log10.CC BY · PubMed Central
Figure 6 Best-fits of five dominant models describing water binding on solid surfaces. Fits were obtained by non-linear least square optimisation of model parameters. Equations for the Do-Do (Equation 4), BET, Freundlich, FHH and HGT (Equations 1, 2, 3) are briefly discussed in the Supplementary Section.
Figure 6 Best-fits of five dominant models describing water binding on solid surfaces. Fits were obtained by non-linear least square optimisation of model parameters. Equations for the Do-Do (Equation 4), BET, Freundlich, FHH and HGT (Equations 1, 2, 3) are briefly discussed in the Supplementary Section.CC BY · PubMed Central
Figure 7 Condensation saturation densities obtained by fitting of DVS data (Fig. 3) with the Do-Do model (Equation 4) as a function of lower and upper ranges of particle size (a) and specific surface area (b). These latter data can be modeled using the function log(H2O/nm2) = −0.29 (log(ss))2 – 0.76 log(ss) + 4.36, where ss is specific surface area in m2/g. The dashed lines show the model predictions within ~1σ. ‘aka’ is the abbreviation for ‘akaganéite’ and ‘ferri’ for ‘ferrihydrite’. These two FeOOH-like minerals have slightly larger water loadings due to the incorporation of water in the bulk structure of akaganéite57 and possible condensation in aggregated nano-sized ferrihydrite particles log10.
Figure 7 Condensation saturation densities obtained by fitting of DVS data (Fig. 3) with the Do-Do model (Equation 4) as a function of lower and upper ranges of particle size (a) and specific surface area (b). These latter data can be modeled using the function log(H2O/nm2) = −0.29 (log(ss))2 – 0.76 log(ss) + 4.36, where ss is specific surface area in m2/g. The dashed lines show the model predictions within ~1σ. ‘aka’ is the abbreviation for ‘akaganéite’ and ‘ferri’ for ‘ferrihydrite’. These two FeOOH-like minerals have slightly larger water loadings due to the incorporation of water in the bulk structure of akaganéite57 and possible condensation in aggregated nano-sized ferrihydrite particles log10.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 73

Metadata

Authors
Yeşilbaş, M., & Boily, J.-F.
Affiliations
Umeå University (SE)
Corresponding author
Boily, Jean-François
Venue
Scientific Reports
Published
2016-08-26
Volume
6
Issue
1
Pages
32136-32136
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2508536161
Cited by
73
References
63
Citations by year
2026: 8 · 2025: 7 · 2024: 4 · 2023: 8 · 2022: 12 · 2021: 7 · 2020: 10 · 2019: 9 · 2018: 5 · 2017: 3
FWCI
3.56
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • KTH Publication Database DiVA (KTH Royal Institute of Technology) (submittedVersion, other-oa)
Funders
  • Vetenskapsrådet (2012-02976)
  • Umeå Universitet
  • Center for Exercise Medicine, University of Alabama at Birmingham
  • Leibniz-Gemeinschaft
  • Leibniz-Institut für Troposphärenforschung
  • Pacific Northwest National Laboratory
Topics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Biophysics › Chemical and Physical Studies
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Spectroscopy and Quantum Chemical Studies
Keywords
mineral particle size, water adsorption, vapor condensation, water film, hygroscopic growth, water vapor, water adsorption isotherms, Freundlich isotherm, hydrogen bonding, interparticle distance, atmospheric water

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.