The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy
Open accessAbstract
High-entropy alloys (HEAs) comprise a novel class of scientifically and technologically interesting materials. Among these, equatomic CrMnFeCoNi with the face-centered cubic (FCC) structure is noteworthy because its ductility and strength increase with decreasing temperature while maintaining outstanding fracture toughness at cryogenic temperatures. Here we report for the first time by single-crystal micropillar compression that its bulk room temperature critical resolved shear stress (CRSS) is ~33–43 MPa, ~10 times higher than that of pure nickel. CRSS depends on pillar size with an inverse power-law scaling exponent of –0.63 independent of orientation. Planar ½ < 110 > {111} dislocations dissociate into Shockley partials whose separations range from ~3.5–4.5 nm near the screw orientation to ~5–8 nm near the edge, yielding a stacking fault energy of 30 ± 5 mJ/m 2. Dislocations are smoothly curved without any preferred line orientation indicating no significant anisotropy in mobilities of edge and screw segments. The shear-modulus-normalized CRSS of the HEA is not exceptionally high compared to those of certain concentrated binary FCC solid solutions. Its rough magnitude calculated using the Fleischer/Labusch models corresponds to that of a hypothetical binary with the elastic constants of our HEA, solute concentrations of 20–50 at.%, and atomic size misfit of ~4%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationOtto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationSample Dimensions Influence Strength and Crystal Plasticity
Uchic, M. D., Dimiduk, D. M., Florando, J. N., & Nix, W. D. (2004) · Science · doi:10.1126/science.1098993 · Cited by 2,330
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Dislocations and Cracks in Anisotropic Elasticity
Stroh, A. N. (1958) · Philosophical Magazine · doi:10.1080/14786435808565804 · Cited by 1,606
Greer, J. R., Oliver, W. C., & Nix, W. D. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.12.031 · Cited by 1,501
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
Otto, F., Yang, Y., Bei, H., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.01.042 · Cited by 1,445
Self-citationA Statistical Theory of Solid Solution Hardening
Labusch, R. (1970) · physica status solidi (b) · doi:10.1002/pssb.19700410221 · Cited by 1,439
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Self-citationHigh entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationTuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Short-range order and its impact on the CrCoNi medium-entropy alloy
Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,279
Clarifying the four core effects of high-entropy materials
Hsu, W.-L., Tsai, C.-W., Yeh, A.-C., & Yeh, J.-W. (2024) · Nature Reviews Chemistry · doi:10.1038/s41570-024-00602-5 · Cited by 928
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
Dehm, G., Jaya, B. N., Raghavan, R., & Kirchlechner, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.06.019 · Cited by 382
Cooperative deformation in high-entropy alloys at ultralow temperatures
Naeem, M., He, H., Zhang, F., Huang, H., Harjo, S., Kawasaki, T., Wang, B., Lan, S., Wu, Z., Wang, F., et al. (2020) · Science Advances · doi:10.1126/sciadv.aax4002 · Cited by 323
From high-entropy alloys to complex concentrated alloys
Gorsse, S., Couzinié, J.-P., & Miracle, D. B. (2018) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2018.09.004 · Cited by 293
Engineering atomic-level complexity in high-entropy and complex concentrated alloys
Oh, H. S., Kim, S. J., Odbadrakh, K., Ryu, W. H., Yoon, K. N., Mu, S., Körmann, F., Ikeda, Y., Tasan, C. C., Raabe, D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10012-7 · Cited by 289
Metadata
- Authors
- Okamoto, N. L., Fujimoto, S., Kambara, Y., Kawamura, M., Chen, Z. M. T., Matsunoshita, H., Tanaka, K., Inui, H., & George, E. P.
- Venue
- Scientific Reports
- Published
- 2016-10-24
- Volume
- 6
- Issue
- 1
- Pages
- 35863-35863
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2539140484
- Cited by
- 446
- References
- 35
- FWCI
- 28.04
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.