Hydrolysis of soybean oil
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Subcritical water has been recently demonstrated to be a viable medium for conducting hydrolysis reactions on a variety of organic compounds. In this study, the hydrolysis of triglycerides in soybean oil to their respective free fatty acids has been affected using a flow reactor. The flow reactor permits hydrolysis to be accomplished without the need of a catalyst but requires higher temperatures than previously used in a static system to attain >97% product conversion. Using a high pressure view cell as a diagnostic aid, it was found that the oil miscibility with water is crucial to attaining a high conversion to the free fatty acids. Water to oil ratios of 2.5∶1–5∶1 were found to optimal for high conversions as well as residence time between 10–15 minutes in the open tubular reactor. Such rapid hydrolysis times contrast with multi-hour conversions utilized industrially to achieve a 96–98% fatty acid yield. Although conversion of the all natural cis forms of the fatty acids to some trans form occurred, the isolated products were clear and free of degradation products, unlike previous results reported for the reaction run in a closed vessel under static conditions at these elevated temperatures (>300 °C). Determination of the trans fatty acid content of aqueous hydrolyzed oils has not been previously reported, however they are of minor importance since the produced fatty acid mixtures are primarily intended for industrial utilization and not for food consumption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Continuous fat splitting plants using the colgate‐emery process
Barnebey, H. L., & Brown, A. C. (1948) · Journal of the American Oil Chemists' Society · doi:10.1007/bf02579733 · Cited by 106
Cited by
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Hydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
A review of bio-oil production from hydrothermal liquefaction of algae
Guo, Y., Yeh, T., Song, W., Xu, D., & Wang, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.049 · Cited by 395
Continuous Flow Organic Synthesis under High‐Temperature/Pressure Conditions
Razzaq, T., & Kappe, C. O. (2010) · Chemistry – An Asian Journal · doi:10.1002/asia.201000010 · Cited by 319
A review on hydrothermal co-liquefaction of biomass
Yang, J., (Sophia) He, Q., & Yang, L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.033 · Cited by 300
Metadata
- Authors
- King, J. W., Holliday, R. L., & List, G. R.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 1999
- Volume
- 1
- Issue
- 6
- Pages
- 261-264
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W1934556334
- Cited by
- 138
- References
- 1
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.