The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite
Abstract
High strength cements can be synthesised by alkali activation of materials rich in Al2O3 and SiO2. In this study, amorphous aluminosilicate polymers produced by sodium silicate activation of metakaolinite were studied, with particular reference to chemical optimisation of the compressive strength according to the relative concentrations of Si, Al and Na in the polymer. The sodium silicate was manufactured from silica fume and sodium hydroxide. The compressive strengths of polymers with Si∶Al molar ratios of 1.0–3.0 and Na∶Al molar ratios of 0.5–2.0 were considered. The polymers were cured at 75 °C for 24 h and their compressive strengths measured after aging for 7 days. The strength was found to depend systematically on the relative amounts of Si, Al and Na, with the maximum being 64 ± 3 MPa for an Si∶Al∶Na molar ratio of 2.5∶1∶1.3. X-Ray diffraction/scattering data indicate qualitatively that the bonding network in the amorphous aluminosilicate alters systematically with composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
The distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Size Effect in Blunt Fracture: Concrete, Rock, Metal
Bažant, Z. P. (1984) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1984)110:4(518 · Cited by 1,727
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 674
Alonso, S., & Palomo, A. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00212-3 · Cited by 542
Mechanism of zeolite synthesis from coal fly ash by alkali hydrothermal reaction
Murayama, N., Yamamoto, H., & Shibata, J. (2002) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(01)00046-1 · Cited by 448
Calorimetric study of alkaline activation of calcium hydroxide-metakaolin solid mixtures
Alonso, S., & Palomo, A. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00435-x · Cited by 341
The effect of fly ash composition on the expansion of concrete due to alkali–silica reaction
Shehata, M. H., & Thomas, M. D. A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00283-0 · Cited by 335
Effect of Fly Ash and Silica Fume on Compressive and Fracture Behaviors of Concrete
Lam, L., Wong, Y. L., & Poon, C. S. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(97)00269-x · Cited by 329
The microstructure and mechanical properties of blended cements hydrated at various temperatures
Escalante-Garcı́a, J. I., & Sharp, J. H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00471-9 · Cited by 324
Rahier, H., Van Mele, B., Biesemans, M., Wastiels, J., & Wu, X. (1996) · Journal of Materials Science · doi:10.1007/bf00355128 · Cited by 256
Rahier, H., Simons, W., Van Mele, B., & Biesemans, M. (1997) · Journal of Materials Science · doi:10.1023/a:1018563914630 · Cited by 200
Low-temperature synthesized aluminosilicate glasses
Rahier, H., Mele, B. V., & Wastiels, J. (1996) · Journal of Materials Science · doi:10.1007/bf00355129 · Cited by 168
Hydration reaction and hardening of calcined clays and related minerals.
Murat, M. (1983) · Cement and Concrete Research · doi:10.1016/0008-8846(83)90010-8 · Cited by 148
Activation of fly ash and its effects on cement properties
Fan, Y., Yin, S., Wen, Z., & Zhong, J. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00178-1 · Cited by 125
Properties of fly ash-modified cement mortar-aggregate interfaces
Wong, Y. L., Lam, L., Poon, C. S., & Zhou, F. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00189-1 · Cited by 123
Influence of the Degree of Dehydroxylation of Kaolinite on the Properties of Aluminosilicate Glasses
Rahier, H., Wullaert, B., & Mele, B. V. (2000) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010138130395 · Cited by 88
Investigation of a synthetic aluminosilicate inorganic polymer
Hos, J. P., McCormick, P. G., & Byrne, L. T. (2002) · Journal of Materials Science · doi:10.1023/a:1015329619089 · Cited by 78
Mechanical behaviour of Portland cement mortars with incorporation of Al-containing salt slags
Pereira, D. A., de Aguiar, B., Castro, F., Almeida, M. F., & Labrincha, J. A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00272-6 · Cited by 65
Cited by
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Metadata
- Authors
- Rowles, M., & O'Connor, B.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2003-03-20
- Volume
- 13
- Issue
- 5
- Pages
- 1161-1165
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2075013334
- Cited by
- 485
- References
- 20
- FWCI
- 27.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.