The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite
Abstract
High strength cements can be synthesised by alkali activation of materials rich in Al2O3 and SiO2. In this study, amorphous aluminosilicate polymers produced by sodium silicate activation of metakaolinite were studied, with particular reference to chemical optimisation of the compressive strength according to the relative concentrations of Si, Al and Na in the polymer. The sodium silicate was manufactured from silica fume and sodium hydroxide. The compressive strengths of polymers with Si∶Al molar ratios of 1.0–3.0 and Na∶Al molar ratios of 0.5–2.0 were considered. The polymers were cured at 75 °C for 24 h and their compressive strengths measured after aging for 7 days. The strength was found to depend systematically on the relative amounts of Si, Al and Na, with the maximum being 64 ± 3 MPa for an Si∶Al∶Na molar ratio of 2.5∶1∶1.3. X-Ray diffraction/scattering data indicate qualitatively that the bonding network in the amorphous aluminosilicate alters systematically with composition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
The distribution of aluminum in the tetrahedra of silicates and aluminates
Loewenstein, W. B. (1954) · American Mineralogist · Cited by 1,794
Size Effect in Blunt Fracture: Concrete, Rock, Metal
Bažant, Z. P. (1984) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1984)110:4(518 · Cited by 1,727
Geopolymers and geopolymeric materials
Davidovits, J. (1989) · Journal of Thermal Analysis · doi:10.1007/bf01904446 · Cited by 1,148
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Lorenzen, L. (1997) · Minerals Engineering · doi:10.1016/s0892-6875(97)00046-0 · Cited by 674
Alonso, S., & Palomo, A. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00212-3 · Cited by 542
Mechanism of zeolite synthesis from coal fly ash by alkali hydrothermal reaction
Murayama, N., Yamamoto, H., & Shibata, J. (2002) · International Journal of Mineral Processing · doi:10.1016/s0301-7516(01)00046-1 · Cited by 448
Calorimetric study of alkaline activation of calcium hydroxide-metakaolin solid mixtures
Alonso, S., & Palomo, A. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00435-x · Cited by 341
The effect of fly ash composition on the expansion of concrete due to alkali–silica reaction
Shehata, M. H., & Thomas, M. D. A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00283-0 · Cited by 335
Effect of Fly Ash and Silica Fume on Compressive and Fracture Behaviors of Concrete
Lam, L., Wong, Y. L., & Poon, C. S. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(97)00269-x · Cited by 329
Cited by
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Kinetics of geopolymerization: Role of Al2O3 and SiO2
Silva, P. D., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.01.003 · Cited by 916
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Lee, N. K., & Lee, H. K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.107 · Cited by 754
Environmental impact assessment of fly ash and silica fume based geopolymer concrete
Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K. S., & Singh, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120147 · Cited by 576
Structure and properties of clay-based geopolymer cements: A review
Liew, Y.-M., Heah, C.-Y., Mohd Mustafa, A. B., & Kamarudin, H. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.08.002 · Cited by 574
Alkali-activated binders: A review. Part 2. About materials and binders manufacture
Pacheco-Torgal, F., Castro-Gomes, J., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.03.019 · Cited by 519
Production of eco-friendly bricks from copper mine tailings through geopolymerization
Ahmari, S., & Zhang, L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.10.048 · Cited by 510
Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C
Duxson, P., Lukey, G. C., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0535-4 · Cited by 500
Wan, Q., Rao, F., Song, S., García, R. E., Estrella, R. M., Patiño, C. L., & Zhang, Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.014 · Cited by 481
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0494216 · Cited by 470
Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., Gordillo, M., & Provis, J. L. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5490-z · Cited by 414
Development of geopolymer mortar under ambient temperature for in situ applications
Al-Majidi, M. H., Lampropoulos, A., Cundy, A., & Meikle, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.085 · Cited by 410
Li, Y., Min, X., Ke, Y., Liu, D., & Tang, C. (2019) · Waste Management · doi:10.1016/j.wasman.2018.11.019 · Cited by 367
Alkali-activated metakaolin: A short guide for civil Engineer – An overview
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.030 · Cited by 313
Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer
Bell, J. L., Driemeyer, P. E., & Kriven, W. M. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02922.x · Cited by 299
Ambient Temperature Drying Shrinkage and Cracking in Metakaolin‐Based Geopolymers
Kuenzel, C., Vandeperre, L. J., Donatello, S., Boccaccini, A. R., & Cheeseman, C. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05380.x · Cited by 291
Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
Rickard, W. D. A., Temuujin, J., & van Riessen, A. (2012) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2012.05.032 · Cited by 278
Synthesis and characterization of fly ash modified mine tailings-based geopolymers
Zhang, L., Ahmari, S., & Zhang, J. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.005 · Cited by 273
Jaya, N. A., Yun-Ming, L., Cheng-Yong, H., Abdullah, M. M. A. B., & Hussin, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118641 · Cited by 261
The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer
Muñiz-Villarreal, M. S., Manzano-Ramírez, A., Sampieri-Bulbarela, S., Gasca-Tirado, J. R., Reyes-Araiza, J. L., Rubio-Ávalos, J. C., Pérez-Bueno, J. J., Apatiga, L. M., Zaldivar-Cadena, A., & Amigó-Borrás, V. (2011) · Materials Letters · doi:10.1016/j.matlet.2010.12.049 · Cited by 257
Factors Affecting the Compressive Strength of Geopolymers: A Review
Castillo, H., Collado, H., Droguett, T., Sánchez, S., Vesely, M., Garrido, P., & Palma, S. (2021) · Minerals · doi:10.3390/min11121317 · Cited by 231
Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD
Williams, R. P., & van Riessen, A. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.031 · Cited by 200
29Si, 27Al, 1H and 23Na MAS NMR study of the bonding character in aluminosilicate inorganic polymers
Rowles, M. R., Hanna, J. V., Pike, K. J., Smith, M. E., & O'Connor, B. H. (2007) · Applied Magnetic Resonance · doi:10.1007/s00723-007-0043-y · Cited by 173
Self-citationWilliams, R. P., Hart, R. D., & van Riessen, A. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04410.x · Cited by 137
Improvement of Strength and Volume-Change Properties of Expansive Clays with Geopolymer Treatment
Samuel, R., Puppala, A. J., Banerjee, A., Huang, O., Radovic, M., & Chakraborty, S. (2021) · Transportation Research Record: Journal of the Transportation Research Board · doi:10.1177/03611981211001842 · Cited by 43
Zaliha, S. Z. S., Al Bakri, A. M. M., Kamarudin, H., & Fauziah, A. (2014) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.803.135 · Cited by 11
Metadata
- Authors
- Rowles, M., & O'Connor, B.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2003-03-20
- Volume
- 13
- Issue
- 5
- Pages
- 1161-1165
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2075013334
- Cited by
- 485
- References
- 20
- FWCI
- 27.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.