The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
Abstract
An inverted polymer solar cell geometry comprising a total of five layers was optimized using laboratory scale cells and the operational stability was studied under model atmospheres. The device geometry was substrate-ITO-ZnO-(active layer)-PEDOT:PSS-silver with P3HT-PCBM as the active layer. The inverted devices were compared to model devices with a normal geometry where the order of the layers was substrate-ITO-PEDOT:PSS-(active layer)-aluminium. In both cases illumination was through the substrate which requires that it is transparent. Both device types were optimized to a power conversion efficiency of 2.7% (1000 W m−2, AM1.5G, 72 ± 2 °C). The devices were operated under illumination while being subjected to different atmospheres to identify the dominant modes of degradation. Dry nitrogen (99.999%), dry oxygen (99.5%), humid nitrogen (90 ± 5% relative humidity) and ambient atmosphere (20% oxygen, 20 ± 5% relative humidity) were employed and both device types were found to be stable in a nitrogen atmosphere during the test period of 200 hours. The devices with a normal geometry where an aluminium electrode is employed gave stable operation in dry oxygen but did not give stable device operation in the presence of humidity. The inverted devices behaved oppositely where the less reactive silver electrode gave stable operation in the presence of humidity but poor stability in the presence of oxygen. The inverted model device was then used to develop a new process giving access to fully roll-to-roll (R2R) processed polymer solar cells entirely by solution processing starting from a polyethyleneterephthalate (PET) substrate with a layer of indium-tin-oxide (ITO). All processing was performed in air without vacuum coating steps and modules comprising eight serially connected cells gave power conversion efficiencies as high as 2.1% for the full module with 120 cm2 active area (AM1.5G, 393 W m−2) and up to 2.3% for modules with 4.8 cm2 active area (AM1.5G, 1000 W m−2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationOrganic solar cells: An overview
Hoppe, H., & Sariciftci, N. S. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.0252 · Cited by 2,556
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationConjugated Polymer Photovoltaic Cells
Coakley, K. M., & McGehee, M. D. (2004) · Chemistry of Materials · doi:10.1021/cm049654n · Cited by 2,128
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
Morphology of polymer/fullerene bulk heterojunction solar cells
Hoppe, H., & Sariciftci, N. S. (2006) · J. Mater. Chem. · doi:10.1039/b510618b · Cited by 1,414
Low band gap polymers for organic photovoltaics
BUNDGAARD, E., & KREBS, F. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.01.015 · Cited by 1,346
Self-citationA brief history of the development of organic and polymeric photovoltaics
Spanggaard, H., & Krebs, F. C. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.021 · Cited by 1,181
Self-citationEffect of LiF/metal electrodes on the performance of plastic solar cells
Brabec, C. J., Shaheen, S. E., Winder, C., Sariciftci, N. S., & Denk, P. (2002) · Applied Physics Letters · doi:10.1063/1.1446988 · Cited by 945
McCullough, R. D., Lowe, R. D., Jayaraman, M., & Anderson, D. L. (1993) · The Journal of Organic Chemistry · doi:10.1021/jo00056a024 · Cited by 905
Krebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationEfficient inverted polymer solar cells
Li, G., Chu, C.-W., Shrotriya, V., Huang, J., & Yang, Y. (2006) · Applied Physics Letters · doi:10.1063/1.2212270 · Cited by 788
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.012 · Cited by 780
Self-citationDegradation of organic solar cells due to air exposure
Kawano, K., Pacios, R., Poplavskyy, D., Nelson, J., Bradley, D. D. C., & Durrant, J. R. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.06.041 · Cited by 734
Low bandgap polymers for photon harvesting in bulk heterojunction solar cells
Winder, C., & Sariciftci, N. S. (2004) · Journal of Materials Chemistry · doi:10.1039/b306630d · Cited by 700
Small Bandgap Polymers for Organic Solar Cells(Polymer Material Development in the Last 5 Years)
Kroon, R., Lenes, M., Hummelen, J. C., Blom, P. W. M., & de Boer, B. (2008) · Polymer Reviews · doi:10.1080/15583720802231833 · Cited by 662
Flexible, long-lived, large-area, organic solar cells
Lungenschmied, C., Dennler, G., Neugebauer, H., Sariciftci, S. N., Glatthaar, M., Meyer, T., & Meyer, A. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.013 · Cited by 487
Solution-Processed Organic Solar Cells
Brabec, C. J., & Durrant, J. R. (2008) · MRS Bulletin · doi:10.1557/mrs2008.138 · Cited by 395
Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes
Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.013 · Cited by 303
Self-citationWater-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling
Norrman, K., Gevorgyan, S. A., & Krebs, F. C. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am800039w · Cited by 281
Self-citationKrebs, F. C., Alstrup, J., Spanggaard, H., Larsen, K., & Kold, E. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.031 · Cited by 249
Self-citationPrintable anodes for flexible organic solar cell modules
Aernouts, T., Vanlaeke, P., Geens, W., Poortmans, J., Heremans, P., Borghs, S., Mertens, R., Andriessen, R., & Leenders, L. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.11.038 · Cited by 248
Krebs, F. C., Carlé, J. E., Cruys‐Bagger, N., Andersen, M., Lilliedal, M. R., HAMMOND, M., & Hvidt, S. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.09.002 · Cited by 186
Self-citationA simple nanostructured polymer/ZnO hybrid solar cell—preparation and operation in air
Krebs, F. C., Thomann, Y., Thomann, R., & Andreasen, J. W. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/42/424013 · Cited by 157
Self-citationZimmermann, B., Glatthaar, M., Niggemann, M., Riede, M., Hinsch, A., & Gombert, A. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.10.005 · Cited by 130
Helgesen, M., Gevorgyan, S. A., & Krebs, F. C. (2008) · Macromolecules · doi:10.1021/ma801932a · Cited by 114
Self-citationBiodegradable polymer solar cells
Strange, M., Plackett, D., Kaasgaard, M., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.02.002 · Cited by 98
Self-citationA setup for studying stability and degradation of polymer solar cells
Gevorgyan, S. A., Jørgensen, M., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.02.008 · Cited by 86
Self-citation
Cited by
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring
Liu, Y., Pharr, M., & Salvatore, G. A. (2017) · ACS Nano · doi:10.1021/acsnano.7b04898 · Cited by 1,725
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Metadata
- Authors
- Krebs, F. C., Gevorgyan, S. A., & Alstrup, J.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 19
- Issue
- 30
- Pages
- 5442
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1968571822
- Cited by
- 1,229
- References
- 33
- FWCI
- 126.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.