The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
Abstract
An inverted polymer solar cell geometry comprising a total of five layers was optimized using laboratory scale cells and the operational stability was studied under model atmospheres. The device geometry was substrate-ITO-ZnO-(active layer)-PEDOT:PSS-silver with P3HT-PCBM as the active layer. The inverted devices were compared to model devices with a normal geometry where the order of the layers was substrate-ITO-PEDOT:PSS-(active layer)-aluminium. In both cases illumination was through the substrate which requires that it is transparent. Both device types were optimized to a power conversion efficiency of 2.7% (1000 W m−2, AM1.5G, 72 ± 2 °C). The devices were operated under illumination while being subjected to different atmospheres to identify the dominant modes of degradation. Dry nitrogen (99.999%), dry oxygen (99.5%), humid nitrogen (90 ± 5% relative humidity) and ambient atmosphere (20% oxygen, 20 ± 5% relative humidity) were employed and both device types were found to be stable in a nitrogen atmosphere during the test period of 200 hours. The devices with a normal geometry where an aluminium electrode is employed gave stable operation in dry oxygen but did not give stable device operation in the presence of humidity. The inverted devices behaved oppositely where the less reactive silver electrode gave stable operation in the presence of humidity but poor stability in the presence of oxygen. The inverted model device was then used to develop a new process giving access to fully roll-to-roll (R2R) processed polymer solar cells entirely by solution processing starting from a polyethyleneterephthalate (PET) substrate with a layer of indium-tin-oxide (ITO). All processing was performed in air without vacuum coating steps and modules comprising eight serially connected cells gave power conversion efficiencies as high as 2.1% for the full module with 120 cm2 active area (AM1.5G, 393 W m−2) and up to 2.3% for modules with 4.8 cm2 active area (AM1.5G, 1000 W m−2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationOrganic solar cells: An overview
Hoppe, H., & Sariciftci, N. S. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.0252 · Cited by 2,556
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationConjugated Polymer Photovoltaic Cells
Coakley, K. M., & McGehee, M. D. (2004) · Chemistry of Materials · doi:10.1021/cm049654n · Cited by 2,128
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
Cited by
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring
Liu, Y., Pharr, M., & Salvatore, G. A. (2017) · ACS Nano · doi:10.1021/acsnano.7b04898 · Cited by 1,725
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Self-citationStability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Self-citationA Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
P3HT:PCBM, Best Seller in Polymer Photovoltaic Research
Dang, M. T., Hirsch, L., & Wantz, G. (2011) · Advanced Materials · doi:10.1002/adma.201100792 · Cited by 1,261
Yip, H.-L., & Jen, A. K.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02806a · Cited by 1,117
Roll‐to‐Roll fabrication of large area functional organic materials
Søndergaard, R. R., Hösel, M., & Krebs, F. C. (2013) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23192 · Cited by 1,065
Self-citationStability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Imide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationStability of perovskite solar cells
Wang, D., Wright, M., Elumalai, N. K., & Uddin, A. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.025 · Cited by 998
Interface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
Small, C. E., Chen, S., Subbiah, J., Amb, C. M., Tsang, S.-W., Lai, T.-H., Reynolds, J. R., & So, F. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.317 · Cited by 931
Root, S. E., Savagatrup, S., Printz, A. D., Rodriquez, D., & Lipomi, D. J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00003 · Cited by 904
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
A Thieno[3,4-c]pyrrole-4,6-dione-Based Copolymer for Efficient Solar Cells
Zou, Y., Najari, A., Berrouard, P., Beaupré, S., Réda Aïch, B., Tao, Y., & Leclerc, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja101888b · Cited by 769
Advanced materials and processes for polymer solar cell devices
Helgesen, M., Søndergaard, R., & Krebs, F. C. (2010) · J. Mater. Chem. · doi:10.1039/b913168j · Cited by 767
Self-citationEnvironmental impacts of solar energy systems: A review
Rabaia, M. K. H., Abdelkareem, M. A., Sayed, E. T., Elsaid, K., Chae, K.-J., Wilberforce, T., & Olabi, A. G. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141989 · Cited by 744
Synthesis of a Low Band Gap Polymer and Its Application in Highly Efficient Polymer Solar Cells
Hou, J., Chen, H.-Y., Zhang, S., Chen, R. I., Yang, Y., Wu, Y., & Li, G. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9064975 · Cited by 711
Organic—inorganic hybrid solar cells: A comparative review
Wright, M., & Uddin, A. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.07.006 · Cited by 654
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Self-citationKrebs, F. C. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.03.009 · Cited by 608
Self-citationDegradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell
Norrman, K., Madsen, M. V., Gevorgyan, S. A., & Krebs, F. C. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106299g · Cited by 588
Self-citationProgress in Stability of Organic Solar Cells
Duan, L., & Uddin, A. (2020) · Advanced Science · doi:10.1002/advs.201903259 · Cited by 534
Polymer:fullerene bulk heterojunction solar cells
Nelson, J. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70210-3 · Cited by 499
Solar cells with one-day energy payback for the factories of the future
Espinosa, N., Hösel, M., Angmo, D., & Krebs, F. C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02728j · Cited by 496
Self-citationBulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Krebs, F. C., Nielsen, T. D., Fyenbo, J., Wadstrøm, M., & Pedersen, M. S. (2010) · Energy & Environmental Science · doi:10.1039/b918441d · Cited by 483
Self-citationApplication Challenges in Fiber and Textile Electronics
Wang, L., Fu, X., He, J., Shi, X., Chen, T., Chen, P., Wang, B., & Peng, H. (2020) · Advanced Materials · doi:10.1002/adma.201901971 · Cited by 477
Polymer solar cells: Recent development and possible routes for improvement in the performance
Cai, W., Gong, X., & Cao, Y. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.10.005 · Cited by 463
Polymer bulk heterojunction solar cells employing Förster resonance energy transfer
Huang, J.-S., Goh, T., Li, X., Sfeir, M. Y., Bielinski, E. A., Tomasulo, S., Lee, M. L., Hazari, N., & Taylor, A. D. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.82 · Cited by 435
Zhou, E., Cong, J., Wei, Q., Tajima, K., Yang, C., & Hashimoto, K. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201005408 · Cited by 419
Harris, K. D., Elias, A. L., & Chung, H.-J. (2016) · Journal of Materials Science · doi:10.1007/s10853-015-9643-3 · Cited by 403
Stretchable, elastic materials and devices for solar energy conversion
Lipomi, D. J., & Bao, Z. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01881g · Cited by 392
Zhang, Z., Chen, X., Chen, P., Guan, G., Qiu, L., Lin, H., Yang, Z., Bai, W., Luo, Y., & Peng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302951 · Cited by 366
Garcia-Belmonte, G., Boix, P. P., Bisquert, J., Sessolo, M., & Bolink, H. J. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.10.015 · Cited by 365
Business, market and intellectual property analysis of polymer solar cells
Nielsen, T. D., Cruickshank, C., Foged, S., Thorsen, J., & Krebs, F. C. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.04.074 · Cited by 361
Self-citationRecent progress in organic photovoltaics: device architecture and optical design
Cao, W., & Xue, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00260a · Cited by 356
Xue, Q., Xia, R., Brabec, C. J., & Yip, H.-L. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00154e · Cited by 344
Espinosa, N., García-Valverde, R., Urbina, A., & Krebs, F. C. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.08.020 · Cited by 342
Self-citationPo, R., Bernardi, A., Calabrese, A., Carbonera, C., Corso, G., & Pellegrino, A. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43460e · Cited by 336
Transparent electrodes for organic optoelectronic devices: a review
Cao, W., Li, J., Chen, H., & Xue, J. (2014) · Journal of Photonics for Energy · doi:10.1117/1.jpe.4.040990 · Cited by 335
Yan, J., & Saunders, B. R. (2014) · RSC Adv. · doi:10.1039/c4ra07064j · Cited by 320
Takacs, C. J., Sun, Y., Welch, G. C., Perez, L. A., Liu, X., Wen, W., Bazan, G. C., & Heeger, A. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3050713 · Cited by 320
Wafer-scale design of lightweight and transparent electronics that wraps around hairs
Salvatore, G. A., Münzenrieder, N., Kinkeldei, T., Petti, L., Zysset, C., Strebel, I., Büthe, L., & Tröster, G. (2014) · Nature Communications · doi:10.1038/ncomms3982 · Cited by 317
Shah, S. S., Niaz, F., Ehsan, M. A., Das, H. T., Younas, M., Khan, A. S., Rahman, H. U., Nayem, S. M. A., Oyama, M., & Aziz, M. A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110152 · Cited by 317
ZnO cathode buffer layers for inverted polymer solar cells
Liang, Z., Zhang, Q., Jiang, L., & Cao, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02510a · Cited by 317
Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.04.020 · Cited by 312
Self-citationDas, S., Yang, B., Gu, G., Joshi, P. C., Ivanov, I. N., Rouleau, C. M., Aytug, T., Geohegan, D. B., & Xiao, K. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00119 · Cited by 312
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
He, Z., Wu, H., & Cao, Y. (2014) · Advanced Materials · doi:10.1002/adma.201303391 · Cited by 258
A High‐Performing Solution‐Processed Small Molecule:Perylene Diimide Bulk Heterojunction Solar Cell
Sharenko, A., Proctor, C. M., van der Poll, T. S., Henson, Z. B., Nguyen, T., & Bazan, G. C. (2013) · Advanced Materials · doi:10.1002/adma.201301167 · Cited by 258
Lee, J. Y., Song, H. J., Lee, S. M., Lee, J. H., & Moon, D. K. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.06.005 · Cited by 44
Jin, X., Sun, W., Chen, Z., Wei, T., Chen, C., He, X., Yuan, Y., Li, Y., & Li, Q. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501597k · Cited by 40
Highly efficient small molecule solar cells fabricated with non-halogenated solvents
Xiao, L., Liu, C., Gao, K., Yan, Y., Peng, J., Cao, Y., & Peng, X. (2015) · RSC Advances · doi:10.1039/c5ra19054a · Cited by 13
Porphyrin dimers as donors for solution-processed bulk heterojunction organic solar cells
Hsu, F.-C., Hsieh, M.-K., Kashi, C., Yeh, C.-Y., Lin, T.-Y., & Chen, Y.-F. (2016) · RSC Advances · doi:10.1039/c6ra04746g · Cited by 11
Metadata
- Authors
- Krebs, F. C., Gevorgyan, S. A., & Alstrup, J.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 19
- Issue
- 30
- Pages
- 5442
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1968571822
- Cited by
- 1,229
- References
- 33
- FWCI
- 126.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.