The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Mesoporous TiO2 with high packing density for superior lithium storage
Abstract
Micrometre-sized mesoporous materials have characteristic grains as well as pores nearly in the same scale. Electrodes of mesoporous materials for lithium batteries have short transport lengths for Li+ ions due to their nano-sized grains (10–20 nm), and easy access for electrolytes due to their nanopores (5–10 nm). Such mesoporous materials have high packing densities unlike nanopowders, nanowires, nanorods and nanotubes. Despite such advantages, electronic conduction over micrometre-sized particles limits the rate performance of mesporous materials. Occasionally counductive thin layers (2–5 nm) of carbon or RuO2 have been used to overcome such kinetic limitations and to achieve high storage performances. In this manuscript, we present a simple approach for the synthesis of mesoporous TiO2 anatase using a soft-template method, which shows superior storage performance without such conductive surface layers. Various cationic surfactants with different chain lengths have been selected for this investigation to assist the formation of the mesoporous TiO2 structure. Among these, cetyl trimethylammoniumbromide templated C16-TiO2 has the highest surface area of 135 m2 g−1 and reversible capacity of 288, 220, 138,134 and 107 mAh g−1 at 0.2, 1, 5, 10 and 30C respectively. The storage performance of the as-synthesized mesoporous TiO2 is nearly five times better than the commercially available TiO2 nanopowder. The packing density of meso-TiO2 is found to be 6.6 times higher than the TiO2 nanopowder. In addition, battery testing using mesoporous TiO2 electrodes without the 15% carbon additive exhibits nearly the same performance at low rate as the meso-TiO2 with carbon additives. These exciting results suggest a facile conduction path for electrons, a unique character of micrometre-sized mesoporous TiO2 with highly interconnected nanograins of 15–20 nm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Nanowire dye-sensitized solar cells
Law, M., Greene, L. E., Johnson, J. C., Saykally, R., & Yang, P. (2005) · Nature Materials · doi:10.1038/nmat1387 · Cited by 5,332
On the controllable soft-templating approach to mesoporous silicates
Wan, Y., & Zhao (2007) · Chemical Reviews · doi:10.1021/cr068020s · Cited by 2,371
Virus-Enabled Synthesis and Assembly of Nanowires for Lithium Ion Battery Electrodes
Nam, K. T., Kim, D.-W., Yoo, P. J., Chiang, C.-Y., Meethong, N., Hammond, P. T., Chiang, Y.-M., & Belcher, A. M. (2006) · Science · doi:10.1126/science.1122716 · Cited by 1,855
Li+ Ion Insertion in TiO2 (Anatase). 2. Voltammetry on Nanoporous Films
Lindström, H., Södergren, S., Solbrand, A., Rensmo, H., Hjelm, J., Hagfeldt, A., & Lindquist, S.-E. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp970490q · Cited by 1,669
Self-Assembled TiO2–Graphene Hybrid Nanostructures for Enhanced Li-Ion Insertion
Wang, D., Choi, D., Li, J., Yang, Z., Nie, Z., Kou, R., Hu, D., Wang, C., Saraf, L. V., Zhang, J., et al. (2009) · ACS Nano · doi:10.1021/nn900150y · Cited by 1,654
Nanoionics: ion transport and electrochemical storage in confined systems
Maier, J. (2005) · Nature Materials · doi:10.1038/nmat1513 · Cited by 1,460
Electrochemical and Photoelectrochemical Investigation of Single-Crystal Anatase
Kavan, L., Grätzel, M., Gilbert, S. E., Klemenz, C., & Scheel, H. J. (1996) · Journal of the American Chemical Society · doi:10.1021/ja954172l · Cited by 1,422
Nanoionics: ion transport and electrochemical storage in confined systems
MAIER, J. (2010) · Materials for Sustainable Energy · doi:10.1142/9789814317665_0023 · Cited by 1,202
High Lithium Electroactivity of Nanometer‐Sized Rutile TiO2
Hu, Y. ‐., Kienle, L., Guo, Y. ‐., & Maier, J. (2006) · Advanced Materials · doi:10.1002/adma.200502723 · Cited by 857
Lithium‐Ion Intercalation into TiO2‐B Nanowires
Armstrong, A. R., Armstrong, G., Canales, J., García, R., & Bruce, P. G. (2005) · Advanced Materials · doi:10.1002/adma.200400795 · Cited by 824
Armstrong, A. R., Armstrong, G., Canales, J., & Bruce, P. G. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200353571 · Cited by 737
Guo, Y. ‐., Hu, Y. ‐., Sigle, W., & Maier, J. (2007) · Advanced Materials · doi:10.1002/adma.200602828 · Cited by 601
Kavan, L., Grätzel, M., Rathouský, J., et al. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836455 · Cited by 381
“Host−Guest” Chemistry in the Synthesis of Ordered Nonsiliceous Mesoporous Materials
Wan, Y., Yang, H., & Zhao, D. (2006) · Accounts of Chemical Research · doi:10.1021/ar050091a · Cited by 379
A General Route to Nonspherical Anatase TiO2 Hollow Colloids and Magnetic Multifunctional Particles
Lou, X. W., & Archer, L. A. (2008) · Advanced Materials · doi:10.1002/adma.200702379 · Cited by 335
Nanotubes with the TiO2-B structure
Armstrong, G., Armstrong, A. R., Canales‐Vázquez, J., & Bruce, P. G. (2005) · Chemical Communications · doi:10.1039/b501883h · Cited by 311
Two Phase Morphology Limits Lithium Diffusion in TiO2 (Anatase): A 7Li MAS NMR Study
Wagemaker, M., van de Krol, R., Kentgens, A. P. M., van Well, A. A., & Mulder, F. M. (2001) · Journal of the American Chemical Society · doi:10.1021/ja0161148 · Cited by 306
Synthesis of Nanowire and Mesoporous Low‐Temperature LiCoO2 by a Post‐Templating Reaction
Jiao, F., Shaju, K. M., & Bruce, P. G. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200501663 · Cited by 274
Theoretical study of lithium intercalation in rutile and anatase
Stashans, A., Lunell, S., Bergstrom, R. W., Hagfeldt, A., & Lindquist, S. (1996) · Physical review. B, Condensed matter · doi:10.1103/physrevb.53.159 · Cited by 220
In Situ X‐Ray Diffraction of Lithium Intercalation in Nanostructured and Thin Film Anatase TiO2
van de Krol, R., Goossens, A., & Meulenkamp, E. A. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392447 · Cited by 200
Size effects and nanostructured materials for energy applications
Balaya, P. (2008) · Energy & Environmental Science · doi:10.1039/b809078p · Cited by 198
Self-citationHighly Organized Mesoporous TiO2 Films with Controlled Crystallinity: A Li‐Insertion Study
Fattakhova‐Rohlfing, D., Wark, M., Brezesinski, T., Smarsly, B. M., & Rathouský, J. (2007) · Advanced Functional Materials · doi:10.1002/adfm.200600425 · Cited by 159
Wang, Q., Wen, Z., & Li, J. (2006) · Inorganic Chemistry · doi:10.1021/ic060477x · Cited by 115
Das, S. K., Darmakolla, S., & Bhattacharyya, A. J. (2010) · Journal of Materials Chemistry · doi:10.1039/b919139a · Cited by 91
Electrochemical performance of mesoporous TiO2 anatase
Kubiak, P., Geserick, J., Hüsing, N., & Wohlfahrt‐Mehrens, M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.044 · Cited by 82
Bing, Z., Yuan, Y., Wang, Y., & Fu, Z. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2159297 · Cited by 36
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Lithium ion battery applications of molybdenum disulfide (MoS2) nanocomposites
Stephenson, T., Li, Z., Olsen, B., & Mitlin, D. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42591f · Cited by 1,322
Saravanan, K., Mason, C. W., Rudola, A., Wong, K. H., & Balaya, P. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200803 · Cited by 810
Self-citationComplex Hollow Nanostructures: Synthesis and Energy‐Related Applications
Yu, L., Hu, H., Wu, H. B., & Lou, X. W. (. (2017) · Advanced Materials · doi:10.1002/adma.201604563 · Cited by 737
Metadata
- Authors
- Saravanan, K., Ananthanarayanan, K., & Balaya, P.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 3
- Issue
- 7
- Pages
- 939
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2057547550
- Cited by
- 268
- References
- 27
- FWCI
- 21.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.